Showing posts with label caparison. Show all posts
Showing posts with label caparison. Show all posts

Wednesday, August 23, 2017

Converting the Perry Crusaders

A little something that I wrote up for use by Wargames Illustrated.  Its about the time when I was crazy enough to convert some beautiful Perry Bros. miniatures in to a time period that moved along a little bit in to the future, so to speak.  Enjoy. 

Link to their web page

Sunday, December 11, 2011

Green Stuff Cloth Tutorial - Space Marines and Norman Horses

Redmanphill over at the Subject to Stupidity blog requested that I do a tutorial of how I do cloth out of greenstuff or brownstuff.  So if you don't like this tutorial, blame him.  Anyways I'll do this with two items that I'm converting that don't have anything in common, other than being miniatures:  Norman Horses and Space Marines.  So I have you 40k and Ancients guys both covered.  This is a relatively simple method to use, yields relatively simple looking cloth, and will not give you a cloth look with a lot of bubbles or fingerprints, unless your name is Tom Schadle.

First thing I need is a relatively good piece of plastic that the green stuff or brown stuff does not stick very well to.  That is generally a higher quality zip lock bag, not your typical thin plastic sandwich bag but something more industrial, or the film that they use to ship the two part GS in.  So here I have placed some water on the plastic, get it a bit wet.  Take some GS and flatten it out in between your fingers and get the basic shape.  Place that over the wet spot on the plastic.  Now we will smooth that out and get its thickness to a relatively consistent thickness.  To smooth out the GS, I will use tool number 1, that we so back in my Armor Plate tutorial.
 
Matter of fact we'll use tools #1, 2, 3, and 6.  In reality you only need a tool like #1 or 'c' and something that looks like a toothpick (a wet toothpick will work). 

Next I cut it to the desired shape. Use the color shaper or spatula end of a metal sculpting tool to further flatten the GS.  This one will be for the Norman Horse, a bit bigger piece than would be used for the space marine tabbard. 

Let it set up and stiffen 5 minutes or so.

Now if you use a small piece of plastic film, you could pick it up by the film and apply it to the miniature or peel the film off gently and apply it to the miniature. If you peel be aware of finger prints and its important to let the GS set up for a bit and stiffen. Once on the miniature you will need to manipulate it.

For this, I'm using a very good sized zip lock bag, so I will peel it off very gently with the xacto. 

Now I place it on the horse.



Here on the horse caparison I blended the upper edge into the horse body simply with my fingers. To do the blending moisten your finger and drag it across the GS until it blends smoothly into the plastic.





The further smooth out spots where my fingers don't fit, I use the tools and press and move the GS into those areas. 


I also need a crease in the center for the seem holding the caparison together.  I do that with the knife edge of the spatula tool.

Next I use the metal toothpick like tool, the conical color shaper, metal toothpick 90 degree bend, color shaper chisel point, or a bent wire tool to add creases or folds. You can also add folds by gently bending the GS into a shape.

The Space Marine tabard is very much done the same way.  Get the general shape.



Smooth out.

 Cut to shape.

Peel it off and I apply the piece of GS to the spot where the torso is glued to. 
On the above I used the tooth pick tool to make the 'V' coming off the pelvic area.  Below I added a few more creases with the tools, and then added a torso to make sure everything blends in.

Wow.  Long post.  Next time I'll show how I do drapings off shoulder pads and legs of the spacemarine, when I begin my space marine project.