Five quilt tops basted and it took me two days. I use staight pins because they are easier on the fingers but still my fingers were sore so I quit after 4 then made supper and finally mid afternoon the next day I finished the big one, I did have places to go and people to see that day. It was good to let the batting relax after being crammed in the bag. Quilts are basted now on to the power sewing. Link to quilt basting and frame. No borders on some of these quilts does that make them modern?
--Ann--
Showing posts with label quilt frame. Show all posts
Showing posts with label quilt frame. Show all posts
Monday, July 29, 2019
Tuesday, January 17, 2017
quilt basting and power sewing
I basted two quilts over the weekend. The first challenge was to find the four old kitchen chairs that I set the quilt frame on. Two were in the guest bedroom and one in the closet but where was the 4th???? I looked in every room of the house twice and no chair. So I made the rounds again there it was in plain site in the family room downstairs with the fan positioned to hit the elliptical. I use it everyday well I did take a week off because I had a cold and just didn't have the energy. I finally found the obvious. After putting away all the chairs and frame parts it was on to power sewing. It is warming up here temps in the upper 20's and 30's I'll have to go for a walk outside today. --Ann--
Labels:
free motion quilting,
quilt basting,
quilt frame
Tuesday, October 9, 2012
Quilt Frame
Reposted with updated photos.
I have read so many blogs by quilters who are still crawling on the floor to layer and baste or pin their quilts. It is time to rise up off the floor and get yourself a quilt frame! I watched Footloose the other night Whether you find one at an estate sale or go to the lumber yard and buy boards to make one, a serious quilter needs a quilt frame.
I have 2 quilting frames, this one was my Gramma's, the boards are 3/4 inch x 4 inches wide and are 86 and 101 inches long. It will frame up to a full size quilt. It has holes drilled every 4 inches, pieced strips of denim are nailed to each board for pinning the backing. The holes are for dropping large nails through to square the frame. Then she used C clamps to keep it tight. Gramma used the frame to hand quilt. She would sit on one side and quilt as far as she could reach then remove pins and 2 nails and roll the quilt onto the board and then drop the nails through the holes again and clamp with C clamps to keep the frame in place and the quilt taught on the frame. She had short stanchions with holes for the corner nails so the quilt was at a comfortable height for quilting.
The other quilt frame that I have belonged to the Grandmother of one of my dearest friends and if she ever starts quilting I will return it to her. It is made of 1 inch x 2 inch boards that are 96 inches and 120 inches long.
I set it on my dining chairs, a good height for pinning, its a little higher than kitchen counter tops. I put the nails in the holes then measure across and lengthwise at the corners and diagonally to be sure it is square.
Then I pin or staple the backing to the frame. Stapling is quicker to put on the frame but pinning in much quicker to take off and there is no scarring the fabric with pins.
Lay the batting on and smooth it out.

I pin with straight pins if I plan to machine quilt it. I baste if I am going to hand quilt with my lap frame.
Buy boards that are knot free you don't want it oozing sap on your quilt. And don't let the guy at the lumber yard sell you warped or crooked boards that contractors have rejected. Straight boards are a must. Clamp or tape the boards together in pairs so you are drilling holes through both boards. Measure and mark every 4 inches. Then take your hubby's cordless drill and drill holes big enough to accommodate the 4 great big nails you bought with the boards. Mine are mismatched 3 1/2 and 4 inch nails. If you are a pinner sew long strips of denim and fold in half then tack or staple to boards. If you prefer to staple quilts to the frame skip that step. Use a light weight staple gun with 1/4 inch staples you want them to come out easily. I tilt the staple gun slightly so the staple does not go in all the way and leaves a space to pry it out with a flat edge screw driver.
I have read so many blogs by quilters who are still crawling on the floor to layer and baste or pin their quilts. It is time to rise up off the floor and get yourself a quilt frame! I watched Footloose the other night Whether you find one at an estate sale or go to the lumber yard and buy boards to make one, a serious quilter needs a quilt frame.
I have 2 quilting frames, this one was my Gramma's, the boards are 3/4 inch x 4 inches wide and are 86 and 101 inches long. It will frame up to a full size quilt. It has holes drilled every 4 inches, pieced strips of denim are nailed to each board for pinning the backing. The holes are for dropping large nails through to square the frame. Then she used C clamps to keep it tight. Gramma used the frame to hand quilt. She would sit on one side and quilt as far as she could reach then remove pins and 2 nails and roll the quilt onto the board and then drop the nails through the holes again and clamp with C clamps to keep the frame in place and the quilt taught on the frame. She had short stanchions with holes for the corner nails so the quilt was at a comfortable height for quilting.
The other quilt frame that I have belonged to the Grandmother of one of my dearest friends and if she ever starts quilting I will return it to her. It is made of 1 inch x 2 inch boards that are 96 inches and 120 inches long.
I set it on my dining chairs, a good height for pinning, its a little higher than kitchen counter tops. I put the nails in the holes then measure across and lengthwise at the corners and diagonally to be sure it is square.
Then I pin or staple the backing to the frame. Stapling is quicker to put on the frame but pinning in much quicker to take off and there is no scarring the fabric with pins.
Lay quilt top on and smooth it out
I pin with straight pins if I plan to machine quilt it. I baste if I am going to hand quilt with my lap frame.
Buy boards that are knot free you don't want it oozing sap on your quilt. And don't let the guy at the lumber yard sell you warped or crooked boards that contractors have rejected. Straight boards are a must. Clamp or tape the boards together in pairs so you are drilling holes through both boards. Measure and mark every 4 inches. Then take your hubby's cordless drill and drill holes big enough to accommodate the 4 great big nails you bought with the boards. Mine are mismatched 3 1/2 and 4 inch nails. If you are a pinner sew long strips of denim and fold in half then tack or staple to boards. If you prefer to staple quilts to the frame skip that step. Use a light weight staple gun with 1/4 inch staples you want them to come out easily. I tilt the staple gun slightly so the staple does not go in all the way and leaves a space to pry it out with a flat edge screw driver.
Save your knees! Save your back! Get a quilt frame! Sweet talk your hubby into one for Valentines Day or get him a cordless drill.
Happy Quilting,
Ann
Labels:
30 degree angle,
Hummingbird pattern,
quilt basting,
quilt frame,
scrap
Tuesday, October 4, 2011
Quilt Basting Day
I had a quilt basting day last week. I always wait until I have four or five quilt tops sewn then I set up my Grandma's quilting frame. It is rickety and I have thought about making a new one with markings in the center of each board and carefully measuring and drilling holes from the center so it is absolutely square but it is a very tangible connection to my grandparents. It must be 80 years old because she made quilts in the 1930's. She tacked strips of Grandpa's worn out overalls to the boards to pin the quilt. So I set it up, drop the nails through the holes and measure across at the corners and diagonally and sometimes drill new holes to make it square.

These quilts started as I assembled a round robin quilt from several years ago. A group of quilting friends each passed around a project and each of us added a block to her project. Some made blocks from the Nancy Odem patterns I included in my project others deviated from the patterns but kept with the theme.
The colors were so cheerful and my stash so plentiful of Cabbage Rose fabrics that it lead to the Hummingbird pattern by Darlene Zimmerman using her 30 degree angle. Works great!!

so I made another
Then cut more strips for Puddle Ducks which is a combination of the goose track block also called ducks foot and the duck and ducklings block also called hen and chicks block. However they were sewn together as a Jacob's Ladder block sometimes called a jewel box with sashing and corner stones to make the ducks foot and duck and duckling blocks. I had to plan the layout so the ducks foot and the duck and duckling block intersected with the cornerstones.
Red and Butter a pattern by Barbara Brandenburg. I just love red and yellow together and I just happened to have some in my stash. Sometimes I just have to sew something easy to get back in the swing of quilting. This quilt has a bamboo and cotton blend batting. I had to try it because I have some bamboo fiber socks that are instantly warm to wear with slacks and dress shoes. Ladies you all know what I mean we wear thin socks with dress shoes and our feet are cold and clammy. I'll let you know how warm it is when I get to the binding.
my Bernina awaits
Happy quilting,
Ann
These quilts started as I assembled a round robin quilt from several years ago. A group of quilting friends each passed around a project and each of us added a block to her project. Some made blocks from the Nancy Odem patterns I included in my project others deviated from the patterns but kept with the theme.
The colors were so cheerful and my stash so plentiful of Cabbage Rose fabrics that it lead to the Hummingbird pattern by Darlene Zimmerman using her 30 degree angle. Works great!!
so I made another
Then cut more strips for Puddle Ducks which is a combination of the goose track block also called ducks foot and the duck and ducklings block also called hen and chicks block. However they were sewn together as a Jacob's Ladder block sometimes called a jewel box with sashing and corner stones to make the ducks foot and duck and duckling blocks. I had to plan the layout so the ducks foot and the duck and duckling block intersected with the cornerstones.
Red and Butter a pattern by Barbara Brandenburg. I just love red and yellow together and I just happened to have some in my stash. Sometimes I just have to sew something easy to get back in the swing of quilting. This quilt has a bamboo and cotton blend batting. I had to try it because I have some bamboo fiber socks that are instantly warm to wear with slacks and dress shoes. Ladies you all know what I mean we wear thin socks with dress shoes and our feet are cold and clammy. I'll let you know how warm it is when I get to the binding.
my Bernina awaits
Happy quilting,
Ann
Subscribe to:
Posts (Atom)