Showing posts with label Stenciling. Show all posts
Showing posts with label Stenciling. Show all posts

Monday, May 1, 2023

This Time

 

I came up with this inspired by the April Kit and Mood Board from the Tres Jolie Kit Club, where the topic was all about flowers and foliage. There’s a lot of fussy cutting here, along with a bit of mixed media using mediums from my stash. (Having built up quite a collection, I’m determined to begin to use it all up!)


I started by looking over a few of the 6”x 6” sheets that came in the kit, selecting those that contained the images and colors that I would need, and spending a few hours cutting them out.

Once that was done, I selected two tubes of Impasto paint. I squeezed out a bit of the Mint and watered it down to a thin acrylic consistency and used it to cover the sides of an 8”x 11” canvas. I watered it down a bit more and lightly spread it here and there on a shutter from my stash.

I used a heat tool on the canvas to make sure that it was completely dry. I had already selected one of the 12”x 12” papers (I love how it looks like the weathered outside of a cottage.) and trimmed it down to a bit over 8”x 11”. After heavily distressing the edges, I adhered it to the canvas using matte gel medium.

I created some “bricks” using texture paste and a very old stencil and let it set completely before lightly applying Boudoir Pink Impasto over the surface to evoke a worn effect.

The center of the shutter piece was backed with a bit of patterned paper that had been treated with Old Paper Distress Paint and then fastened to the canvas.

Next, I started with my layering, using bits of packaging behind some of the pieces to add dimension. I kept on adding flower images until I was satisfied and then placed some of the flower embellishments – some from the kit and a few from my stash. Once that was done, I began to glue down the vine images underneath the cluster. My project still needed something, so I added a few pieces to the upper shutter and a few more to the upper corner and finished it all with a Wishing Bauble as my title piece.

A few closeups:





 

 ***************************************************

*****Supplies*****

***Paper***

Paper Heaven – First Kiss Collection – 12 x 12 Double Sided Paper #PH-PPOOset

Sheet #1

Sheet #6

Paper Heaven – First Kiss Collection – 6 x 6 Double Sided Paper

***Embellishments***

49 and Market – Florets – Mango - #FM-39005

Little Birdie – Arion – Amor Mio - #CR79434

Prima Marketing – Flower Embellishments – Piper #594886

49 & Market – Wishing Bubbles & Baubles – Mango #VAC-35243

***Other***

Prima – Memory Hardware – Venetian Shutter #996363

***Mediums***

Prima – Finnabair – Art Alchemy – Impasto – Mint #966416

Prima – Finnabair – Art Alchemy – Impasto – Boudoir Pink #966379

Prima – Finnabair – Art Basics – 3D Matte Gel #961398

Prima – Finnabair – Art Extravagance – Paper Texture Paste #965259

Ranger – Tim Holtz – Distress Ink Pad – Old Paper #TIM19503

***Tools***

Prima – Masks – Fence #2 #550011

***************************************************

As always, I want to thank you for peeking into my blog; your visits mean a lot to me.

 

Friday, February 17, 2023

A Spoonful of Love

 

I’ve been wanting to get back to mixed media for a while, and Dawna’s Mixed Media Challenge over at Scrapbook.com has been the perfect opportunity. I’ve raided my stash for all the materials and mediums to create a vintage-type canvas with lots of mechanical elements for the Valentine’s Day season.


 I started by adhering the tissue paper to a 9” x 12” canvas, using matte gel medium to glue it down and then on top to seal it. I ran an archival ink pad around the edges to give it some definition.

When it was absolutely dry, I added some texture by running paper texture paste through a stencil.

While this was setting, I made a few heart and mechanical embellishments using a Finnabair mold and cast resin. I selected a few metal embellishments and a bit of lace to add to my piece.

I started with the lace, cutting a few pieces, and adhering them to the center and arranging them to create the basic flow of the design. Next, I glued down the spoon and then I began to add resin and metal pieces here and there until I was satisfied with the results. I filled in some gaps and added a bit of interest with art stone. (I used matte gel medium as my adhesive; it works with any and all surfaces.) I covered all the components with white gesso. This does double duty, sealing all porous surfaces and adding “teeth” to the smooth ones.

Time to add a little color! I started with the Butterfly Spells acrylic, painting it here and there and spraying it so that it would lightly run down the canvas, using my heat tool to set it. I repeated this step, using the French Lavender shade, then going over and over my piece, alternating the paints, until everything was covered. Next, I watered down some Burnt Sienna paint until it had a consistency of a thick ink and lightly spread it over my assemblage to tone down the colors and give it a shabby look.

I finished my canvas by adding a little bit more of water to the paint and, with the aid of a fan brush, applied splatters over the entire surface.

 

***************************************************

 

*****Supplies*****

 

***Paper***

Prima – Finnabair – Decorative Paper – Romantic #968090

***Embellishments***

Prima – Finnabair – Embellishments – Mechanicals – Metal Blooms #968496

Prima – Finnabair – Embellishments – Mechanicals – Grungy Gears #968519

Prima – Finnabair – Embellishments – Mechanicals – Tin Hearts #963361

Prima – Finnabair – Embellishments – Mechanicals – Machine Parts #967109

Prima – Trims – Magnolia #583019

Reneabouquets – Drop Leaf Lace - White

***Mediums***

Ranger – Distress – Archival Ink – Ground Espresso #AMPK77947

Prima – Finnabair – Art Basics – 3D Matte Gel #961398

Prima – Finnabair – Art Basics – Heavy Gesso – White #961442

Prima – Finnabair – Art Extravagance – Paper Texture Paste #965259

Prima – Finnabair – Art Ingredients – Art Stones – White #963705

Prima – Finnabair – Art Alchemy – Acrylic Paint – Sparks – Butterfly Spells #964122

Prima – Finnabair – Art Alchemy – Acrylic Paint – Metallique – French Lavender #967796

Prima – Finnabair – Art Alchemy – Liquid Acrylic – Burnt Sienna #967222

***Tools***

Prima – Finnabair – Stencil – Victorian Tiles #968946

Prima – Finnabair – Imaginarium – Steampunk Hearts #969448

***Other***

9” x 12” Canvas

Alumilite – Amazing Casting Resin - White

 

***************************************************

As always, I want to thank you for peeking into my blog; your visits mean a lot to me.

 

Tuesday, January 11, 2022

Beautiful Day

 

Today, I’d like to share my take on Tres Jolie’s January Mood Board using the latest Scrapbook Kit, filled with the Walk in the Clouds collection from Paper Heaven, and a gorgeous array of coordinating flowers and chipboard pieces. Here’s what I came up with…


And here’s the Mood Board that inspired it…


The “B” side of Sheet 4 makes a perfect background for my image: a photo taken by my brother a few years ago of Kent’s Point in Cape Cod.


I wanted to add some stenciled images, so I began by backing the paper with a piece of cardboard that I had trimmed to 11.5” x 11.5. (I like to use Scor-Tape for this; it’s a very strong adhesive that will create a permanent bond.)


I used crackle paste and a stencil from my stash to create snowflakes in random spots.


While this was drying, I took out one of the chipboard borders and primed it with several coats of white gesso before covering it with Unicorn Effect Paste to give it an icy look.

I matted my photo with a piece of corrugated cardstock from a DCWV stack that I’ve had for years. To make it look “not flat”, I tore it here and there and then layered the pieces with the torn edges showing.

I’ve been hoarding a Prima vine since March; I cut off a few sections and treated it with white gesso to soften the color. I did the same with one of the Blue River blooms that came in the kit. Time to assemble my page: I backed the photo with packaging and glued it to the corrugated layers, then attached the treated chipboard piece to the bottom. I added one of the resin birds from the kit, then the flowers, finishing it all with a Quotation sticker.

***************************************************

 *****Supplies*****

 ***Très Jolie January Scrapbook Kit***

Paper Heaven – A Walk in the Clouds Collection – 12 x 12 Double Sided Paper – Sheet 04 #PH_SWC04

Tres Jolie – Laser Cut Chipboard – Border Set 1

Prima – Nature Lover Collection – Flower Embellishments – Blue River #653002

Prima – Shabby Chic Treasures Collection – Ingvild Bolme – Resin Embellishments – Birds #892470

 ***Other***

Die Cuts with a View – The Corrugated Stack – 6x6 #MS-019-00002

Prima – Capri Collection – Gabriella #646998

Advantus – Tim Holtz – Idea-Ology – Metallic Stickers – Quotations #TH93559

 ***Mediums***

Golden – Crackle Paste – White #3557-5

Golden – Heavy Gesso – White

Prima – Finnabair – Art Extravagance – Unicorn Effect Paste #966942

***Tools***

The Crafter’s Workshop – 6 x 6 Snowflakes #TCW720s

 ***************************************************

As always, I want to thank you for peeking into my blog; your visits mean a lot to me.

Don’t forget that Tres Jolie can be found in the following places:

Facebook: 

Instagram: 

Tres Jolie website: 

Tres Jolie subscriptions: 

Tres Jolie blog:

Tres Jolie YouTube: 

Pinterest