Tell Your Story OTP Project for Swirlydoos

My first project with the beautiful "Love Letters" kit from Swirlydoos Kit Club is made with one of the P. S. I Love You papers from Kaisercraft, an inexpensive frame that I've had for a long time, and paper clay!

While I had my IOD Moulds out for some fun with Ice Resin (you HAVE to check out some of Kim's videos on You Tube - they give you the complete low-down on this amazing stuff here and here), I decided to create some more embellishments with paper clay. I like the results - when completely dry, they are light weight with a surface that is perfect for adhering any ink or paint that you can wish to use.

I glued my pieces to a 5" x 7" wood frame, using matte gel medium and let it set for a few hours. (Gel medium actually dries in a matter of minutes, but I wanted to ensure that they were securely bonded.

The entire surface was covered with a coat of black gesso, making sure that all of the cracks and undersides were coated. Again, this takes only a few minutes to dry, but I let it sit for a few hours before using a fan brush to lightly coat the entire frame with silver metallic paint, leaving a lot of small spaces black to give it all a look of depth.

Next, I took the Ornate Frames from Kaisercraft's P.S. I Love You collection, carefully cut out the center with my craft knife and put the outside frame aside for another project. I fussy cut the design from the paper and cut part of the remainder to fit the backing. The image was a bit too large to fit, so I trimmed it a bit and tucked the excess parts, along with a bit of Prima's Salvage District ephemera from an earlier kit, in back. As embellishments, I used a butterfly that I also cut from the paper, a few lines of tiny text, a bit of Prima bling, also from my stash and a silver heart sticker from this month's kit.

I dug into my bin of flowers and came up with these beautiful Petaloo Botanica blooms and leaves that blend perfectly with the pretty colors of the paper. To finish it all off, I added a double twine bow.

Supplies

*Swirlydoos February 2017 "Love Letters" Kit*

Kaisercraft - P.S. I Love You Collection - Ornate Frames

David Tutera - Illusion Collection - Wax Seal Heart Stickers

*Swirlydoos February 2016 Kit*

Prima - Salvage District Collection - Ephemera

Other Supplies

Cosmo Cricket - Tiny Text

Petaloo - Botanica Collection - Peach Blooms

Tim Holtz - Jute String

Prima - Leeza Gibbons - Wishes and Dreams Collection - Gem Stones

Prima - IOD Moulds - Baroque 3, Baroque 6

Prima - Finnabair - Art Basics - 3D Matte Gel

Prima - Finnabair - Art Alchemy - Acrylic Paint - Metallique - Silver

Ranger - Distress Ink Pad - Hickory Smoke

Liquitex - Black Gesso

Creative Paper Clay

Michael's - 5 x 7 Wood Frame

As always, thanks so much for stopping by to visit...

********************

If you’re ready to start getting perfectly coordinated, top of the line scrapbook kits delivered to your door, please visit us at www.swirlydoos.com. Mention my name (Peggy) when you subscribe and you’ll receive 10% off your first kit, AND a coupon good for 30% off your entire purchase in the Swirlydoos.com store!

Family

This seems to be my month for do-overs with some of my old family photos; the Delicate Kit from Swirlydoos, featuring Lemoncraft's Gossamer Blue collection, full of blues and coppers made me want to take out these images and scrap them again.

This is a studio portrait of my Great-Grandparents, Elisa and Augustus Heinick, who immigrated from Hamburg, Germany in 1887, along with the eldest of what would be nine children. Great-Aunt Elsa is seated on her mother's lap and Great-Uncle Augustave is next to her. Behind them is my Grandmother, Johanna Marie.

I used the last of my full sheets from the Lemoncraft Gossamer Blue collection - #2 - as the base and a few scraps from earlier pages under my photo.

Also included this month was a sheet of Core'dinations Glitter Silk in Copper Shimmer, which I used to cut a bit of frame using the Spellbinders' Blooming Collections Frame die.

The title was cut from thin chipboard with my Cameo machine and primed with gesso, then colored with a thick coat of Hot Cocoa Liquid Pearls.

I used a bit of the Lemoncraft trim and Mark Richard nail-head stickers to embellish the bottom of the photo. For my flower cluster, I dug into my stash and found these beauties from Prima's Bella collection. I tucked some pretty leaves that I cut using several of my favorite dies: Rose Leaf by Magnolia and Garden Greens by Sizzix.

The stone pillar going down the side of the photo is actually Ice Resin cast in an IOD Mould - Baroque #6. I gave it a good coat of black gesso and put it aside for a few hours. When it was completely dry, I went over it with chalkboard paint using a fan brush to make sure that this would be a light coating and that a lot of the black would show through.

I've gotten a lot done with this  kit - five layouts, but I still have plenty left to create a few cards and tags. I'll be back soon with some of these; meantime, I want to thank you again for stopping by!

Pretty Lady

I created this layout to honor my mother who would have turned 99 years old a few weeks ago. This sweet photo is her Senior portrait taken in 1936.

Among the goodies included in the Delicate Kit from Swirlydoos is a Heidi Swapp Invisible: a heavy piece of white cardstock with a clear embossed design that acts as a resist, showing through when the page is inked. I decided to keep this one simple and colored it all over with Ranger Distress Ink in Tumbled Glass. Next, I trimmed it by 1/4 inch on each side and distressed and inked it all around.

The featured collection this month is Gossamer Blue by Lemoncraft: papers and flair and trims, full of beautiful shades of blues and creams and coppery browns. I chose the #6 page and because I wanted to use all of it, I cut a 10 inch square from the center and put it aside. The outer part was adhered to an 11 inch square of chipboard to keep the page sturdy and then covered with the colored Invisible paper.

The doilies at the bottom are from a set that I've owned for several years: Eau de Nil from Docraft's  Capsule collection. The top one is a heart in a light grey; the bottom is a circle in an even lighter grey. I cut a circle from the paper that I had  put aside, distressed and inked it and adhered it to the center of the bottom doily.

The photo was matted with more of the paper, again distressed and inked; I added a bit of chipboard between each layer to give it some dimension.

I snipped a piece of the Lace Border 3 chipboard from Creative Embellishments and colored it with the same Ranger Distress Ink in Walnut Stain that I used to ink all of my edges, decorated it with Mark Richards Nailhead stickers and placed it next to my photo.

I've been using Ranger Ice Resin and IOD Moulds from Prima to make a pile of clear resin embellishments. The piece at the bottom is from the Baroque 5 Mould, colored with Prima Artisan Powder in La Chapaliere.

The vine from 49 and Market (also included in the Delicate Kit) sort of hides a bit of lace that I placed along the side of the photo; it does peek out in the close-up.

A few finishing touches: butterflies from my Martha Stewart punch and trimmed with more of the Nailheads, a few Prima Memory Hardware pearls and a bow made from the package of Lemoncraft trims.

Enjoy the Moments Wall Hanging

This wall hanging that I made using the October Project Add-On from Swirlydoos was surprisingly quick and easy. I've made it "mine" by switching out a few of the included embellishments with items from my stash of pretties.

To start, I colored the Dusty Attic chipboard phrase with Hickory Smoke Distress Ink and put it aside to dry. (Distress Inks are water-based and take a few moments to set.)

Next came the part that I thought was going to be hard - applying the Iron Orchid Design rub-on transfer to the wood plank base - and turned out to be so easy. Despite the roughness of the surface, it attached perfectly and I was done in no time.

By now, the chipboard was ready for a coating of Wink of Stella - just enough to give it a bit of glimmer. 

And now for the fun part - the embellies! From my stash, I took a Prima vine from the Salvage District collection and cut it in half. I placed it where I thought my cluster would begin and end. I played around with flowers from the kit (more Salvage District blooms from Prima) until I got the look I wanted.

When I was satisfied, I glued it all down, starting with the chipboard phrase.

I decided to use some Kaisercraft pearls around the medallion to give my project an elegant look and to match the several Memory Hardware pearls that I placed in my flower cluster.

I finished it all off with a black resin butterfly that I've had for a long while; it matched the rustic look perfectly!!!

Guest Designing for Swirlydoos with the April Kit: Purple Haze

It's been such an honor to have had one of my layouts chosen as the Swirlydoos Layout of the Year and even more of an honor to be invited to be April's Guest Designer!

And what a gorgeous kit I've been given to use - Purple Haze, full of Blue Fern Studios papers and flowers and embellishments from Kaisercraft, Prima and Tim Holtz, and oh! that embroidery hoop! To top it all off, I've been using all of the add-ons: coordinating cardstock, extra pattern paper, gorgeous flowers, even more embellishments, fun mediums and best of all, brand-new air dry paper clay and those amazing silicone moulds from IOD!

For my first layout, I not only used the Blue Fern Studios chipboard that came in the Embellishment add-on, but I took out an old BFS stamp and lightly applied it to a bit of the packaging that I tore here and there. The chipboard was painted with the Prima Metallique acrylic that came with the Tech add-on and the fun Kaisercraft wood embellishments were colored with the Ken Oliver Liquid Metals from the Mediums kit.

Me and the sibs a few years ago. Somehow, we never think about a group shot when we're together. My niece decided that it was past time that we did and took this wonderful picture of us all.

The Lane Street Sign chipboard from Blue Fern Studios and the Tim Holtz embellishments that came in my shipment put me in mind of this photo of Small Town America - the 1938 Apple Blossom Festival Parade going up Main Street in Le Roy in western New York State. I kept it all pretty simple, with some layering under the image and a selection of the gorgeous flowers from this and the February kit.

The pastel colors, the gorgeous images of flowers and butterflies - not suitable for a boy page, right? Wrong!!!! The pop of red from Kaisercraft sheet that Krissy included with the pattern paper changed the tone completely!!! I've kept it all pretty simple, with distressed layers, those fun Tim Holtz hearts from the Embellishment add-on and the Prima vine from the March Flower kit.

The embellishment on the side of the photo was made with the Tech add-on, colored with Fired Brick Distress Ink and toned down with Prima Artisan Powder.

I discovered this photo last week while looking for something else. That's me and the grandsons two years ago; how they've changed!!!!

Again, I've kept it simple - a couple of doilies from M's, a couple of die cuts using the aptly named Sophia's Heart die from Cheery Lynn, flowers from the gorgeous add-on, the resin birdbath from the main kit and the last of my RAK from Angelica's Little Scrap Shop. Oh, and lots of splatters using inks and Cindy's water + gesso recipe. Last (but not least), I colored one of the wood butterflies with a bit of the Shimmerz Aqua Huez and added a bit of the Darice pearl trim from the main kit.

This is my example for Angelica's All That Flutters Challenge http://www.swirlydoos.com/forums/topic/all-that-flutters-purple-haze/

Sophia out back among the forsythias, wearing her Easter dress. This layout worked better with a close-up; I've put a few more detailed images aside for "later".

My take on this month's sketch by the remarkable Beggahuna takes full advantage of the blend of purple and blue in this sheet of pattern paper. I've done a bit of stenciling and I've used one of my Cherry Lynn dies - Fanciful Flourish.. I've also dug very deeply into my stash for the Basic Grey chipboard alphas of my title.

A bit of explanation, if I may... Hurricane Irene, Superstorm Sandy and a few extreme Nor'easters have cut down a lot of the trees in my complex. To me, the saddest losses of all have been the Dogwoods. I've always looked forward to the many trees in full bloom at the beginning of Spring. The groundskeepers have put in some heroic efforts to save what they can, but I was surprised that this one was merely cut back to the center trunk instead of cut down entirely. Last year, it was totally bare and by all appearances unable to last through another bad storm. Well, the groundskeepers were right - I took these photos of this amazing survivor last month!

Here is the sketch

And here is my layout

When I opened my kit and started the ritual petting and planning, the embroidery hoop that Krissy sent us immediately caught my eye. One quick look at the IOD Moulds that were included in the Project add-on and this idea began to form. As soon as I finished sorting all of the papers and embellies, I took out the air-dry clay and the Baroque 6 Mould and went to work, never considering a tutorial.

By the time Kim and I started discussing what I'd be doing, this wall hanging was complete. 

 I did write up a step-by-step.

(You may want to watch Kim's You Tube tutorial if you're new to air-dried clay https://www.youtube.com/watch?v=Y35Iqa0iWBA )

Here's what I used:

From the April Purple Haze kit and add-ons:

Blue Fern Studios - Serendipity Collection - Inspiration

Wooden embroidery hoop

Prima Garden Fountain resin piece

Kaisercraft  wooden butterflies

Blue Fern Studios Courtship Blooms

Prima rub-ons

Shimmerz Blue Moon Aqua Huez

Prima paper clay

Prima Baroque 6 mould

From the March Peggy's Bicycle kit and add-ons:

Prima Vintage Emporium flowers (from the main kit)

Prima La Chapeliere Artisan Powder

Prima Mini Art Stones

From the February Ballad Flower add-on:

Petaloo Mini Burlap blooms

3-D matte gel

Seam binding, about 3 yards

Old paint brush (make that a small one) for the 3-D gel

Soft paint brush (make that a small one, too) for the Artisan Powder

1. Place the embroidery hoop over the pattern paper, positioning it so that the image you want is perfectly aligned. Be sure that the hoop mechanism is on top. Trace around the outside with a pencil. Put the paper aside for now.

2. Fill the long design on the right edge of the mould with paper clay, making sure that the mould is filled tightly and that the clay is even on top.  Carefully remove the clay. It will be pliable enough to allow you to do this; just be slow and patient. Do this two more times, so you have a total of three pieces.

3. Carefully place your clay pieces around the embroidery hoop, with the rounded edge on top and the bottom edge and the bottom edge flush. Make sure that you begin as close to the metal mechanism as possible, then around the side. The third piece will be too long. That's okay - measure and cut off  the excess, trying to more or less match up the design. You should have your hoop completely covered from one end of the mechanism as possible. (Immediately put the excess clay with the rest of the package and seal tightly.)

4. Wrap the seam binding around the hoop, fastening with the hoop mechanism. You want to bind your clay as firmly as possible, without it so tight that it will mar the design. Make sure that the hoop is laying so that the flush edges are on the bottom.

5. Allow to set overnight. You'll find that your clay has seriously shrunk. No worries - we'll take care of that later! Turn the hoop over; you'll notice that the clay is still moist. Let it sit for a few more hours until thoroughly dry. Carefully undo the seam binding and remove your molded pieces from the embroidery hoop. Put them to the side to thoroughly dry in the middle, for about an hour or so.

6. Find the place on the pattern paper that you want to use your rub-on and adhere. Sprinkle a small amount of the Artisan Powder over the adhesive and tap to remove all excess over your craft mat. 

7. Add a small bit of water to the Artisan Powder and lightly ink the inside and top edge of the embroidery hoop with the paint brush.

8. Adhere the clay pieces to the hoop with the 3-D gel, using the groove that was formed when you first fitted the clay while wet. You'll want to start with your bottom piece, then the sides, trying to get the edges pretty close together. You won't get a perfect match and the top edges will end near the beginning of the metal on top, leaving a sizable gap, about an inch. You will also find gaps around the top. These will be taken care of in the next few steps. 3-D gel dries pretty quickly. You'll have enough time to play around a bit, but it all should be dried and firmly adhered in 30 - 60 minutes.

9. Sprinkle out a small bit of the Artisan Powder. Using a soft dry brush, spread and pounce the powder on the clay until you get the look you want. Apply a bit more to your resin piece. You'll be using the left over powder, so you can let it sit there on your craft mat.

10. Adhere the paper to the hoop with more of the 3-D gel and let sit for a few minutes to set.

11. Brush a small amount of the 3-D gel around the hoop wherever you see a gap. Sprinkle with the mini Art Stones. Keep repeating until all gaps are covered. Next, go here and there around the edges of the paper adding a bit more 3-D gel and Art Stones to give your design a bit more texture.

12. Adhere the resin piece to the paper.

13. Time to fill in those bothersome gaps! And that's why we buy our flowers, right? Place them around your frame, again using 3-D gel, covering all the holes. I've glued a large leaf on one side where the clay pieces meet and a few blooms on the other. That large gap on top is totally filled in with another flower cluster.

14. Color a few butterflies with the Shimmerz Huez and place them along with a few small blossoms around your wall hanging to complete.

15. Spray the left over Artisan Powder with a bit of water. Moisten the seam binding and place it in the wet powder, turning it over until thoroughly colored. Dry with your heat tool. Adhere to the back of your hanging with 3-D gel about 1 inch down and 3 inches across. Cover that with a piece of packaging, making sure that this is glued down thoroughly. Roughly knot the loose edges to complete.

A few notes:

I seem to be mention 3-D gel a lot. It's a very strong adhesive that can be spread very easily, which makes it ideal for gluing on all sorts of embellishments as well as all of the bits of texture that we're playing with lately. It seemed to be the best choice for the paper clay as well as the art stones. It's a bit pricey, but a little goes a long way.

You may notice that the seam binding is adhered in the back of the piece, rather than between the clay and the hoop. The entire piece weighs in at 4-3/4 ounces, enough to make me think that this was the best option.

I can't wait to see what the rest of you do with this amazing kit and all of the fun - and gorgeous - add-ons!!!!

***I want to thank Krissy and her entire Design Team not only for this incredible honor, but for the many years of instruction and inspiration!!!***