Free Tutorial - Summer Placemats and Flatware Pouches

At my house, we're all decked out for summertime!

Wouldn't it be fun to jazz up your own table

with fresh new place settings?
Today I'm sharing a free tutorial,
for placemats and matching flatware pouches!

For these samples, I used a few summery coordinates

from Terry's Fabrics.

I got things started with a favorite print:

Beach Huts in Blue,

with red and blue cabanas on a creamy background.

Next I chose a solid fabric,

Panama Curtain Fabric in Linen.

The taupe tones reminded me of rich sandy beaches.

And now for a little zing...

I selected a fun stripe called Chips, in Ocean.

To make a set of 6 placemats and 6 flatware pouches,

I used about one yard each of the Beach Huts and Linen,

plus 1/2 yard of the striped fabric.

You can cut pieces for 3 placemats,
cutting across the 54" width of home dec or curtain weight fabrics.

Let's get started making the reversible placemats.

I created pieced sections for the front sides.

For each placemat:

cut a section of the beach huts fabric,

measuring 6" high x 17 1/2" wide,

to be used as the center strip.

Add the bottom strip in linen,

cut to 3 1/2" high x 17 1/2" wide.

Add the top strip, also in linen,

cut to 5 1/2" high x 17 1/2" wide.

Here's the placemat front, all stitched and pressed.

Trim the finished front to 13 1/2" high x 17 1/2" wide.

{Keep in mind, you can use a single piece of fabric

or make a patchwork in any pattern. Design opportunities are endless.}

For each placemat cut a backing piece,

measuring 13 1/2" x 17 1/2" wide.

Pin the front and back pieces with right sides together.

Starting on the upper edge, about 2" from a corner,

stitch around all 4 sides with a generous 1/4" seam,

leaving about 2 -3 " open for turning.

Here's a tip I always use

whenever I leave an opening for turning.

I backstitch a tiny (1/4") seam

that goes from the opening to the edge of the fabric, 

as shown in the photo below.

This strengthens the opening

and also makes it easy to turn under the edge

during the pressing step.

Turn the placemat right sides out through the opening.

Use a turning tool to smooth out the side seams

and gently push out the corners.

Give it a good press,

then topstitch near all the edges.
Repeat to create a set of four...or six...
or however many you need.

Admire your gorgeous finished placemats!

And they're reversible!

Now let's make those fun flatware pouches.

For each pouch:

cut (1) outer fabric 6" x 15"

and (1) lining fabric 6" x 15".

Pin outer fabric and lining right sides together,

and stitch with a generous 1/4" seam,

just as you did for the placemats,

leaving a 2" opening on one long edge for turning.

Turn the pouch right sides out through the opening.

Use a turning tool to smooth the seams

and gently push out the corners.

Press well.

Place the pouch with the lining side up,

and fold the bottom edge up to make a 5" pocket.

Press well.

Begin stitching at the bottom fold,

and topstitch along one long edge,

across the top,

and along the other long edge.

Reinforce the stitching along the top edges

of the pocket,

since these are stress points.

These are super quick to make,
and you'll have your set finished in no time.
Look how sweet the flatware pouches look,

filled with silverware and a napkin.

They really dress up those pretty placemats,

don't you think?

These would make wonderful gifts

for Mother's Day, birthdays, wedding showers...

I made some more, to match my Cherry Kitchen decor!
They're just as much fun to use indoors.

{Also, I have a fabulous red gingham picnic tablecloth for my outdoor table.}

I feel more of these coming on...
perhaps with some ric rac trim,
or button-down flaps.

For now, I'm going to have fun using this set all summer long!

This set looks really sharp with the Beach Huts pillows
I had created last summer!

If you create your own placemats or flatware pouches,

I hope you'll let us know how yours turn out!
Feel free to leave a link in the comments,
or add them to my Flickr group here.

Enjoy!

Pin It

Nautical Pillows for the Deck

As summer draws to a close,

time spent on our back deck becomes more cherished.

That's why I jumped at the opportunity

to stitch up some fabulous nautical pillows,

using these awesome prints from Terry's Fabrics!

Terry's Fabrics

has a vast selection of fabrics,
so it wasn't easy to choose between them.

 I had THE BEACH on my mind, so

my search for a focus fabric ended as soon as I discovered

this awesome nautical beach hut print.

I mixed in some fun coordinates:

an ocean blue geometric floral,

some sandy gingham, and fun beach-ball dots.

When I saw the fabrics in person,

I was delighted with the way my choices coordinated!

The prints were actually much larger than I had pictured them...

especially the dots...but that was a GREAT thing!

The quality is superior, and the fabrics were

highly cooperative, with no stiffness or tendency to fray.

All of my prints were home dec weight, except the gingham,

which was a lighter weight, more like quilter's cotton,

but woven...not printed.

I chose to use the gingham for my pillow backings,

and it worked perfectly, since I like to add a layer of

Pellon ShapeFlex SF 101 fusible interfacing anyway.

{I used my own tutorial for the backings, found here.}

I kept the pillow top designs simple,

letting the fabrics play together in similar, 

but different strip sets, for the two pillows.

I stuffed my pillow forms inside,

and they were all set for picnics on the deck.

{I love the way the covers take up almost no space at all for winter storage,

and I can use the pillow forms for other covers.}

Beach huts, umbrellas, and bunting...

checks, stripes and dots...

just about all of my favorites are represented!

Terry's Fabrics is my favorite new find of the summer,

helping me to decorate my outdoor space.

Hmm...wouldn't the scraps make

the cutest beach tote???

Pin It