Quilting from every Angle

My book is finally here!  Quilting from every Angle features 16 geometric quilt designs and will be a great companion to your quilt book library.

• Perfect for advanced beginner with basic quilting knowledge to intermediate quilters.
• Perfect for anyone looking for high-impact designs with a modern flair.
• Perfect mix of minimal and all over designs.
• 3 mini quilts and 13 baby to large throw size quilts.
• Covers half-square triangles, half-rectangle triangles, flying geese, paper piecing, y-seams, improvisational piecing, and appliqué.  
• Introduction to glue basting

This book was an accumulation of hard work and sacrifice, and I hope that you enjoy it.  Thank you to all for your love and support.

UPDATES

To be informed of updates in the book, please CLICK HERE.  If you have any questions, please contact me.  

HOW TO ORDER

For a signed book addressed to a specific person, please include the name in the box 'Note to Seller' at checkout.  All copies purchased through me will include my signature.

BUY NOW!

Quilting From Every Angle $25.00 USD

xx nancy

How to Machine Bind a Quilt || My Method

Binding is one of those things that I seriously forget how to do every.single.time.  No lie.  After every quilt, I refer back to my printed page from Heather Bailey's site.  But this started to get old for me, so I cheated.  Yeah.  I got "lazy" and decided that I no longer wanted to sew the last seam at an angle to join the two strips at the very end of binding, which was the one step that always had me going back to my trusty Heather Bailey referral sheet.

Like always, I urge you to find a method that best suits you.   My method may or may not be the best method for you, but if you find yourself getting frustrated figuring out that very last seam in binding, then my tutorial might be helpful.   Quilting should make you happy not grumpy.  I think this is becoming my new motto.  Actually, it did become my motto.

In this post I go over how to make straight grain binding, the math, how to apply it to your quilt, and how to finish it.

Sandwich and Basting A Quilt || My Method

I needed a post to send people to in regards to making a quilt sandwich and basting.  I know there are several ways of doing this, and I highly recommend trying several tutorials to find the best technique that suits you.  Below, you will find my method.  This is what I do, and it makes me happy.  Quilting should make you happy.  If something makes you grumpy, don't do it.  :)

Pandamonium Quilt Pattern || Fat Quarter Shop

Hello!

I wanted to let you know about a new free pattern by Fat Quarter Shop.  It is called the Pandamonium Quilt.  The link for the pattern is here.

The instructions are pretty straightforward, and you can have this done in a day or two.  If you are on Instagram, check out the hashtag #pandamoniumquilt to see other variations of this quilt.  I even spotted an Andy Warhol version. Pretty cool!   Enjoy!

xx nancy
Find me on Instagram and Facebook

One year ago:  Sweet As Honey Pillow Top
Two years ago: Modern Mini Quilt Challenge
Three years ago: Lucy's Doll

How to Hang PVC Window Treatments

Lately, I have received quite a few emails in regards to my PVC window treatments I did back in 2012.  The original post can be found here.  The main question I got was, "How did you hang them?" since this was something I never covered in the original post.

I LOVE my PVC windows.  They are so wonderful, and they have held up so great.  I highly recommend them for a window treatment alternative.  It brings in just enough light during the day and just enough privacy in the evening with the added bonus of pattern.  I love pattern.  :)

So this tutorial is stupid easy.  SO easy.  You will smack yourself for not thinking of this yourself once I show you.

In the beginning, I used heavy duty velcro and placed in spots that were not visible from the inside of the house as well as the outside of the house.  That worked fine and dandy until after a few months of west facing sun constantly shining on them made the sticky stuff melt.

That's when I switched over to the plastic mirror clips.  Ew.  Did I just hear your trendy self say 'ew'?  Well, it actually looks really good, in my opinion.  It blends *almost* seamlessly with everything else going on.  I guess I could have used white screws to make them even less noticeable, but I was too lazy to do that.

So you take a packet of these cheap mirror clips that most people have a tendency to want to cover up in their bathrooms, and drill those into doors.  I drilled mine into the moulding surrounding the windows.  I placed one clip on top and bottom and then one of either side.  Because the PVC is flexible, I can pop them out (carefully) and clean them when I want.  See how awesome these PVC treatments are?

On a different note, I AM taking suggestions for a light replacement in this kitchen, so speak up! :)

I guess that really wasn't much of tutorial was it, but is it really necessary to show you a photo of me pretending to drill these into the moulding?  Ha!  I didn't think so either.  Promise me you won't smack yourself too hard. ;)

[Photo from my Instagram account]

On a second note, some of you may have noticed that the library cabinet that was once in my living room is now in between my kitchen and eating area.  I moved it there so I could hang a design wall for my quilting.  The design wall is temporary but the cabinet's new location isn't. (We are thinking of adding a desk here.) It's all about making a home that fits YOU and your needs, which is something I didn't learn until much, much later.

xx nancy
Connect with me elsewhere : Instagram (this is my jam.  this is me microblogging my crafty stuff) Facebook,  Pinterest 

One year ago: Stockholm in the house
Two years ago: I went black
Three years ago:  DIY Polka Dot Schoolhouse Light
Four years ago: IHOP pancake recipe (they are actually better.  shh.)


My quilting book released Sept. 24, 2015 and is on Amazon.  Check it out!

This post contains affiliate links.  I have to linked to products I personally use.  I receive a small commission, if you choose to purchase anything.  Thank you for supporting owen's olivia.  

Half Star Mug Rug Tutorial + How to Match the Binding to a Design + Giveaway!

Half star tutorial, and how to match the binding to a design in a quilt.  

This tutorial is part of the Ellison Lane's Merry Mug Rug Hop.  

 I am so happy Jennifer asked me to be a part of this.  I am actually surprised she asked considering I find sewing for the holidays to be difficult.  Not because of the time, but because I just generally have a hard time with Christmas-y decor (or any holiday decor for that matter).  And it's my FAVORITE holiday, and I SEW!!  So weird, I know.   But I am eternally grateful for all the times Jennifer has believed in me and that she still likes to include me in her special hops.  :)  (Thank you!!)

This mug rug design came from what was mentioned above.  I wanted to create something that could be Christmas-y, yet something that, if was out during the year, no one would say, "Isn't that a Christmas mug rug?"   And so the Half Star mug rug was born.  It is simple, minimal, and looks oh-so-lovely on a table or wall.  

This hop runs from Dec. 1st - 11th, and each blogger participating is sharing a tutorial!  So please check out the other participants. They are going to be great!  You'll need to head over to Ellison Lane to enter to win a gift certificate to Southern Fabric, which ends 12/14/14.   

 If you end up making this project, I would love to see it!  #halfstarmugrug and my handle on Instagram is @owensoliviaquilts.  Or share it with me on Facebook.  

Materials

Finishes 8 1/2" square.

From the green fabric (Kona Palm)

-Cut one 4 1/2" x 8 1/2" strip, two 2 1/2" squares, and one 4 1/2" square.

From the white fabric (Kona White)

-Cut one 4 1/2" square.

-Cut one 2 1/2" x 4 1/2" strip.

Binding

-Cut one 2 1/2" x WOF strip.  Cut in half.  

-Cut one 2 1/2" x 8" strip.

10" square of batting

10" square of fabric for backing

Elmer's Glue with a fine point glue tip (mine is from Pile O' Fabric)

Small ruler

Fabric marking pen

Aurifil Mako 12 2024 for handstitching

How to

1.  Sew right sides together the two 4 1/2" squares along all four sides using a 1/4" seam.  

2. Cut diagonally across making an X to create four HSTs.  Press seams open or to the side.

3.  Trim HSTs to 2 1/2" square.

4.  Layout your pieces as pictured.

5.  Sew together the top and bottom two squares.  Sew the two middle squares together.  Press seams open.

6.  Sew the two middle pieces together to create a square.  Sew the top and bottom pieces next.  Sew the right side piece last.  Press seams open.  

7.  Lay your backing right side down, then your batting, and then your top face up.  Quilt the pieces together.  I chose to hand quilt using Aurifil Mako (love!).

How to match the binding to a design in your quilt

1.  Sew together one green strip to the white strip like you normally would in making binding.  Fold your binding in half around the white and green area and press.  Fold the raw edge 1/4" and press with a hot iron to create a crease.

2.  Lay the binding right side up matching the edge along the quilt's edge, as if it were already sewn down and flipped back over to bind on the backside of the quilt.  Line up the white line perfectly, and glue baste into place by placing a dot of glue onto the quilt in the seam and heat setting with an iron.  Glue basting will not damage your quilt or iron.

3. Using a ruler and marking pen, align the ruler along the diagonal line of the HST.  Make a mark onto your binding.  THIS IS YOUR SEAM LINE.  Remove the binding (it will easily pull off with a slight yank), and open up your binding.  Finish drawing your diagonal line onto the white area.

4.  Place your other green binding strip like so in the photo.  Pin into place, and flip the binding over, so you can see your marked line.  Sew on the line.

5.  Before trimming the seam to 1/4", fold the binding back into place to see if it does indeed match.  It is easier to fix with extra binding than it is without it.

6.  Trim the seam, and sew on the binding as normal.  I use Elmer's glue to hold the binding exactly where I want it to be when sewing the binding on, and I sewed the white spot on first to get it exactly where I want it.

Merry Christmas!

xx nancy

Find me here too!

Pinterest
Instagram 1  (personal side + home decor)
Instagram 2  (quilting + sewing only)
Facebook

One year ago: Minimalista Quilt
Two years ago: Christmas Stocking Tutorial
Three years ago:  Christmas Dinner Recipes + Settings


My quilting book released Sept. 24, 2015 and is on Amazon.  Check it out!

Fabric Basket and Bucket || Tutorial

Hello!  Today I'm over at Somewhat Simple sharing a somewhat easy sewing tutorial that's perfect for Spring.  Depending on the choice of fabrics, these are great for children or adults.  Perfect for small storage or for an upcoming Easter as a custom Easter basket.

I had picked up this wood basket last summer in San Deigo, CA, and I loved it shape, size, and awesome graphic print.  Every time I look at it though, it reminded me of the Easter baskets I had growing up, and I knew it would be fun to make a fabric version.

There are two options - with or without handles.  These baskets measure approximately 5" high (excluding the handle) and 8" in diameter.

Get the full tutorial here.

xx nancy

One year ago: Creating with the Stars
Two years ago: Etsy || Illustrations

Fat Quarter Hexagon Clock || Tutorial

I was very fortunate to participate in U Create's Fat Quarter Series last month.  Today, I am sharing with you my DIY Hexagon Clock tutorial that uses only ONE fat quarter!

Did you know hexagons are the new chevrons?  Well, this timeless shape is used all the time in the quilting world, but hexagons are making their way into home decor.

I am sharing with you a different way to use a fat quarter, and how you can incorporate this trendy design into your space.  This project caters to those who hate to sew, are intimated to sew, or just do not have the money or space to acquire sewing tools.

This project can be made to look sophisticated, even minimalistic, or it can be fun and whimsical.  There can be many different variations whether it's the size of the hexagons, the amount of hexagons used, or the fabric itself that is being used.  Each variation can create a new look.

Wood Paneling || Tutorial

When this room reveal went live, I had many requests to know how I did the wall behind the bed.  My inspiration came from my own wood wall and Vintage Revival's.

This tutorial is not loaded with pictures (and phone photos on top of that)  because I was working hard and fast to get this room done for a contest, but it's pretty self-explanatory.  If you have questions, just send me an email.

Please read through all of the instructions before starting.

Materials:

- 4 x 8 sheets of 1/8" tempered hardwood (Masonite) cut down to 4 x 4.  Cut each panel into 3" widths.  The number of sheets you will need will depend on the square footage of the space you are covering.
- Miter saw (I used this in a bathroom next to the bedroom I was working on to make my job easier.)
- Planing saw
- Tape measurer
- Pencil
- 220 Sanding Block (or any other fine sanding block will do)
-  3/4" Brad nails and screws*
- Nail gun (I used this for the brad nails)
- Power drill*
- Paint ( I used Benjamin Moore's Decorator's White - my go-to, all time favorite white to use.)
- Paint supplies
- Ladder


Sand:

Sand all four sides of a wood panel piece.  We will be using the smooth side of the board to face the room.

Paint: 

Using a small brush, paint all four edges of the wood panel.  You do not need to use a lot of paint for this.  In fact, I was not anal about getting it perfectly white.  Some parts exposed a little bit of brown while other parts were completely covered.

Concerning the edges of the boards, you will only paint one board at time!  Sand, paint one piece, nail it up, repeat.  Once you do a few of these, you can then paint several boards at time.  See photo above. But do what is easiest for you.

Placement:

I started at the top of the wall, since I knew I would need to cut my boards in half once I reached the base board.  Pick a side to start on.  Place one board (3" x 48"),  smooth side up, on the wall so it aligns with the ceiling. Hold into place with brad nails.  I nailed one on each side and the center.  If using screws, screw them into either side, and if needed, one in the middle too.

*For this room makeover, the homeowners wanted to have as little holes as possible, so we did not use screws too.  Screws will produce a larger hole in the wall compared to brad nails.  Brad nails will secure the wood to the wall, but the wood panels can be removed with your hands. 

For my second piece, I repeated the above and then placed the board about a 1/8" - 1/4" away from the next piece.  I did not measure for exactness, so all my pieces vary.  When you get to your third or fourth piece, you will need to measure and cut to fit.

When you start on the second row, I placed my first board on the opposite side I started with.  I alternated it back and forth, so my lines would vary.  Sometimes, I would use leftover pieces and start with that first to add variety.

Repeat all these processes until your wall is complete.  If you have an outlet to work around, you will need to measure and cut around it.

To view this room makeover, please click here.
To view the source list, please click here.
Related:
Sharpie Wall

xx nancy

My quilting book released Sept. 24, 2015 and is on Amazon.  Check it out!