Home» Lift System Accessories » Product Detail
Products
 |
THE NAME:
Bellows Boot
Model: Bellows Boot for worm gear screw jack
Categories: Lift System Accessories »
Place of Origin: Made In China
Brand Name: JACTON
Download: 
Description:
Bellows boots are available for all sizes and configurations of JACTON Worm Gear Screw Jacks. A boot protects the lifting screws from contamination and helps retain lubricant to ensure long jack life. Standard boots are sewn from black polyurethane-coated polyester fabric type for oil, water and weather resistance and are acceptable for use in -15��C to +80��C environments, includes extra 2 pieces galvanised hose clips too.
Bellows boots fully retracted length=exact stroke / 0.83
Note: When inverted configurations jacks with boots, total lifting screws stroke=mounting frame thickness + boots fully retracted length + required stroke
Bellows boots for translating screw jacks: The bellows boots end cuff is designed to fit standard lifting screw end fittings, the top plate and the clevis end.
Bellows boots for travel nut rotating screw jacks: Boots for upright rotating and inverted rotating jacks are ordered as separate line items. Typical rotating jack applications require two boots, one between the housing and the travel nut and one from the travel nut to the end of the lifting screws. Each boot for a rotating screw jack is ordered as a separate line item. Installation arrangements for rotating worm gear screw jacks vary, therefore boots for rotating jacks must be specified by the customer.
Guides are recommended for all horizontal applications where travel exceeds 600mm or if the bellows boots needs to remain centered around the lifting screw. The recommended number of guides is one guide for each 600mm of travel length. EXAMPLES: 300mm of travel=no guides, 600mm of travel=one guide, 1175mm of travel=one guide, 1200mm of travel=two guides etc. Standard boots are furnished with tie straps for jacks with greater than 1650mm travel. Tie straps are attached from convolution to convolution and help the boot extend uniformly.
Bellows Boot Dimensions and Technical Parameters
Bellows boots fully retracted length=exact stroke / 0.83
Note: When inverted configurations jacks with boots, total lifting screws stroke=mounting frame thickness + boots fully retracted length + required stroke
Bellows boots for translating screw jacks: The bellows boots end cuff is designed to fit standard lifting screw end fittings, the top plate and the clevis end.
Bellows boots for travel nut rotating screw jacks: Boots for upright rotating and inverted rotating jacks are ordered as separate line items. Typical rotating jack applications require two boots, one between the housing and the travel nut and one from the travel nut to the end of the lifting screws. Each boot for a rotating screw jack is ordered as a separate line item. Installation arrangements for rotating worm gear screw jacks vary, therefore boots for rotating jacks must be specified by the customer.
Guides are recommended for all horizontal applications where travel exceeds 600mm or if the bellows boots needs to remain centered around the lifting screw. The recommended number of guides is one guide for each 600mm of travel length. EXAMPLES: 300mm of travel=no guides, 600mm of travel=one guide, 1175mm of travel=one guide, 1200mm of travel=two guides etc. Standard boots are furnished with tie straps for jacks with greater than 1650mm travel. Tie straps are attached from convolution to convolution and help the boot extend uniformly.
Bellows Boot Dimensions and Technical Parameters
Previous Product:Ball Joint Rod End Bearing
Next Product:Limit Switches
Product List
Manual Electric Screw Jack
Worm Screw Jack
- JTC Cubic Screw Jack
- JTM Worm Screw Jack
- JSS Stainless Steel Jack
- JT Acme Screw Jack
- JTW Machine Screw Jack
- Through Holes Screw Jack
- Custom Made Screw Jack
Ball Screw Jack
Bevel Gear Jack
Miter Gearbox
- JT Classic Miter Gearbox
-
- Order Code for Classic Miter Gearbox
- Classic Miter Gearbox description
- JT15 Miter Gearbox
- JT19 Miter Gearbox
- JT25 Miter Gearbox
- JT32 Miter Gearbox
- JT40 Miter Gearbox
- JT45 Miter Gearbox
- JT50 Miter Gearbox
- JT60 Miter Gearbox
- JT72 Miter Gearbox
- JT85 Miter Gearbox
- Flange Input Solid Output Shaft Gearbox
- JTP Cubic Miter Gearbox
-
- Order Code for Cubic Miter Gearbox
- Cubic Miter Gearbox description
- JTP65 Small Miter Gearbox
- JTP90 Miter Gearbox
- JTP110 Miter Gearbox
- JTP140 Miter Gearbox
- JTP170 Miter Gearbox
- JTP210 Miter Gearbox
- JTP240 Miter Gearbox
- JTP280 Miter Gearbox
- Solid Input and Output Shafts Gearbox
- Solid Input and Hollow Output Gearbox
- Flange Input and Solid Output Gearbox
- Flange Input and Hollow Output Gearbox
- JTA Alu. Miter Gearbox
Lift System and Accessories
- Screw Jack System
- Lift System Accessories
-
- Flexible Jaw Coupling
- Overload Safety Couplings
- Aluminum Couplings
- Telescopic Universal Joint
- Rigid Shaft Couplings
- Universal Joint
- Cast Iron Hand Wheel
- Connecting Shafts
- Aluminum Handwheel
- YVF2 Series Variable Speed AC Motor
- Brake motors
- Three Phase Electric Motor
- Screw Jack Motor Flange
- Single Phase Induction Motors
- K Helical Bevel Geared Motor
- R Helical Geared Motor
- Worm Gear Reducer
- 12V 24V DC Geared Motor
- Proximity Switches
- Limit Switches
- Pillow Blocks
- Pillow Block Flange Bearing
- Digital Position Indicator
- Flange Blocks
- Ball Joint Rod End Bearing
- Bellows Boot
- Helical Gear Motor
- 12V 24V DC Motor
- Linear Bushings and Shafts
- Trunnion Adapters
- Servomotor
- Rotary Encoder
- Low Backlash Planetary Gearheads
- Stepper Motor
- 24V Planetary Gear Reducer
- Planetary Speed Reducer
- Frequency Inverter
- Hydraulic Cylinder Rod End Bearing
- Lift System Applications
Linear Actuators
- LAP Electric Linear Actuator
-
- 100KG Parallel Electromechanical Linear Actuators
- 250KG Parallel Electro Mechanical Linear Actuators
- 500KG Parallel Mount Rod Style Linear Actuators
- 630KG Parallel Mount Electric Cylinder Linear Actuators
- 1000KG Parallel Mount Industrial Linear Actuators Acme Screw
- 1600KG Parallel Electro-mechanical Actuators Heavy Duty
- 2500KG Parallel Mount Electric Cylinders Actuator
- 4000KG Heavy Duty Electric Linear Actuators Parallel Mount
- 6300KG Parallel Motor Drive Electric Actuator Linear Actuator
- 8000KG Parallel Electric Motor-Drive Linear Actuator
- 10000KG Parallel Mount Motorized Electric Linear Actuator
- 15000KG Parallel Industrial Motor Linear Actuator
- 20000KG Parallel Indistrial Motor Drive Linear Actuator
- 25000KG Parallel Electric Motor Linear Electric Actuator
- LA Electric Linear Actuators
-
- 10KG In-line Mini Electric Linear Actuators with Brake Motor
- 25KG In-line Electric Linear Actuator Push Rod
- 63KG In-line 700mm Stroke Electric Motor Linear Actuator
- 90KG In-line High Speed Motor Drive Electric Linear Actuator
- 100KG In-line Fast Speed Electric Linear Motor Linear Actuator
- 300KG Inline Industrial Electromechanical Linear Actuator
- 500KG In-Line Electric Linear Actuator
- 700KG Inline Heavy Electro Mechanical Actuators
- 1000KG In-line Heavy Duty AC Volt Industrial Linear Actuators
- JTE Classic Electric Cylinder
- Mechanical Linear Actuators
- JCA Cubic Electric Cylinder
Application
Jacton Industry Co.,Ltd.
Contact: Warren Lee
Skype: jactonjack
T: 86-769-81585810
F: 86-769-81585852
E: sales@jactonindustry.com
W: www.screw-jack.com
Contact: Warren LeeSkype: jactonjackT: 86-769-81585810 F: 86-769-81585852 E: sales@jactonindustry.com W: www.screw-jack.com
Copyright ©2013 www.screw-jack.com Jacton Industry Co.,Ltd. All Rights Reserved Site Map
Building 2, No. 1, DongCheng Road, Chang An, Dongguan, Guangdong, China. Phone: 86-769-81585810 | Fax: 86-769-81585852
China Screw Jack,Ball Screw Jack,Machine Screw Jack,Worm Gear Screw Jack,Bevel Gear Screw Jack,Miter Gearbox,Screw Jack Lift System Manufacturer
China Screw Jack,Ball Screw Jack,Machine Screw Jack,Worm Gear Screw Jack,Bevel Gear Screw Jack,Miter Gearbox,Screw Jack Lift System Manufacturer