Ada Lovelace: Finished Product

I finished this project back in late July, but right afterwards life geared back up again for school. This afternoon I find myself with some free time, so here are the last of the construction photos and some of the finished product.

Finishing the Wig

Bonnie Figured out that we needed support for the side rolls

Like this!

hair wrapped around the rolls

Finished with comb, veil, and flowers

adding lace to the vaeil

I had to cut the lace in parts to handle the curves

Lace attached to the wig/comb

I had to construct it in two pieces: one sewn directly to the wig, and the other sewn to the comb

attaching the underveil to the wig

Sleeves

I made a test version of the sleeves. The sleeves were just a rectangle of fabric cartridge pleated at the upper edge and gathered at the elbow. I supported the pleating with a strip of batting. 

Cartridge pleats marked & stitched

I trimmed the bottom edge of the pleats with some braided trim and added some leftover lace to the gathered elbow. 

finished bodice!

helper cat

Everything together on the dressform

Accessories

The gloves were a thrift store find. I sewed some trim from my grandmother's stash around the cuff. 

After doing some quick research on period shoes, I decided that ballet flats would be a close analog. I did take the sparkly bows off, though. 

 FINISHED!

I won best recreation at the Shore Leave 35 Costume Contest. It was the first contest I'd ever entered y myself. It was pretty great. The response to the costume was unexpectedly positive. Many women were thrilled to see Ada there to represent for female programmers.

Finally! Corset success! (Historical Sew Fortnightly #13: Lace & Lacing)

So, I have long been in search of a corset pattern that would work for my short waisted proportions. I long ago gave up on buying something off the rack. Being short waisted means that nothing fits vertically. In addition, my hips are proportionally narrow; that is, they are not as wide as one would expect given my bust and waist measurements.

I've tried the Laughing Moon Silverado corset pattern, twice. I also made a corset from an Ageless Pattern recreation of an original 1869 pattern. While the fit of each attempt got better, I've consistently had problems getting the laces parallel, which speaks to a problem getting the horizontal proportions right. I've also had problems giving myself room where I needed it. By this I mean that even though my hips are narrow, they need space in the right places to accommodate their changed shape when corseted. Failure to get the fit right has lead to low back pain and cramping after a few hours of wear.

I decided to try this FREE corset drafting tutorial from FoundationsRevealed.com. I cannot say enough good things about this approach. If you have non-standard proportions, this is the right approach for you.

I have to apologize in advance, I didn't take any photos of the process. If I have an excuse, it's that I was too excited by how well things were going to slow down and document the process.

The process starts by carefully taking several measurements. There are vertical as well as horizontal measurements. This means that if you have an unusually long or short torso, that will be reflected automatically in the pattern.

From these measurements, the tutorial walks through the process of drafting the pattern for the right half of the corset. It is important to note a few key things that the instructions didn't make 100% obvious

1. The pattern drafted does NOT include seam allowances, so it will look waaaaaaay too small. This works to your advantage in the end, as you are free to add whatever width you are comfortable work with for seam allowances.
2. The pattern is designed to have a 2" gap in the back. This gap is included in the pattern, so one needs to remove 1" from the center back once the pattern in complete. If a larger gap is desired, remove more width from this piece. 

When I completed the first muslin, the fit was great from the waist up, but the pattern was far too small from the waist down.

This. Never. Happens.

I think this occurred because the pattern was drafted off my uncorseted measurements. When the corset goes on and cinches in, some of that flesh simply compresses, but some of it moves downward to the hips.

This presented the opportunity to add a hip gore to allow more room for my hips. This also meant that I could put the extra room exactly where I needed it. I opened up the side seam all the way up to the waist. I then pinned in a piece of fabric to drape the gore pattern and fiddled with it until it felt right and the laces were parallel in the back.

I created the final version with a single layer of corset coutil and a outer layer of blue cotton. I bound it with while bias tape and flossed it with white cotton. I had an 11" busk on hand, which turned out to be a little too short, but I compensated with 3 hooks & eyes at the top.

This will be my go-to corset for 1840's - 1900 for now. I chose the blue fabric so pair with my Steampunk Alice in Wonderland costume, which I hope to wear again in August.

The extra hooks & eyes at the top of the bust line help make up for my slightly too short busk. 

Very few patterns put a gore of this shape where this one ended up, but it was right where the extra "squish" wanted to go, and it helped widen my hips from the front view. Widening the hips make my waist look smaller. 

There's some extra room at the bottom of the hip. This helps create the illusion of more proportional hips (making my waist look smaller) and it provides ease when I sit. It will also allow me to wear a chemise more comfortably, should I choose to do so. 

This laces so comfortably down to my standard corseted measurement that I had to recheck my measuring tape three times to make sure I was reading it right. I could easily take another 2" off my waist. It's amazing what happens when the pattern cinched in where one is squishy and leaves room for all the bones. Go in where you go in and go out where you go out = happy corset. 

This is also my first submission to the Historical Sew Fortnightly project. I hope to have more to contribute to this very fun endeavor.

The Challenge: HSF Challenge #13: Lace and lacings

Fabric: Cotton Coutil & Cotton broadcloth

Pattern: Self-drafted from this FREE corset drafting tutorial

Year: 1860's-ish. The drafting tutorial is for a Victorian-inspired, but modern corset pattern

Notions: 1/4" spring steel bones, 1/4" spiral steel bones, 11" steel busk, metal grommets, lacing, bias binding

How historically accurate is it? Fairly accurate. While I can't pin down the pattern to a specific year, the cotton coutil and cotton broadcloth would have been available in the Victorian era. The bias binding is the standard polyester stuff, the thread is polyester, and I assume that the lacing is polyester. I'm also unclear when exactly metal grommets came into use. Let's say... 8/10

Hours to complete: I didn't track this too carefully, but here's my best guess: 4 hours drafting the pattern, 8 hours for muslin, 16 hours for the final version (including flossing). 

First worn: The first public appearance is scheduled for early August. 

Total cost: approximately $60 of supplies went into this corset, but much of that came out of my existing stash. 

Scarf Dress Part II -- SUCCESS!

The dress went together eerily easily. No, really. Just buy some scarves and make these.

As you can see from the photos, I need to work out some kind of bra solution. Right now, I'm thinking about the tape bras. I've used them in the past with great success. I want something to make me feel covered and somewhat supported. I don't envision ever having to wear this dress for more than a few hours at a time, so all day support is not that important.