Unmounting Stamps - My Story

Several times a week I see a request from someone who is interested in unmounting their stamps.

I've been a Stampin' Up! Demonstrator since 2004 and started unmounting almost 4 years ago.

At the time it was not really acceptable to do this but now that Stampin' Up! is offering a clear mount alternative to the traditional wood mount option it has a lot of people wondering if this is the route they should go.

I really think that this is a personal decision. For me it was easy - I ran out of room!

There are many reasons to unmount but the 2 most important ones to me are 1. Storage - too many stamps too little space and 2. better image positioning.

As for unmounting there are so many ways to do it and I have pretty much tried them all!

One thing to keep in mind BEFORE you start - be sure you really want to do this! Because once you unmount your stamps they are not as valuable (resale) as they are on wood blocks. If you're a "working" demo I'm not sure what the rules are but since SU! has gone to unmounted I'm assuming that you can use unmounted all the way in your workshops. Maybe your upline can tell you if that's ok or if you have to use the stamps in the format that they come in (ie/ wood block only sets demo'ed on wood).

For this reason I keep my current stampin' around wheels on the original rollers (yes I unmount my wheels too -keep reading).

So if you are sure that are ready to unmount and these are the stamps that you are going to KEEP then go ahead. But if you're unsure about some sets (maybe you don't LOVE them like your others) you might want to wait on unmounting those and consider using them on wood blocks or eventually sell them.

Here is my LOOOOOONG story of unmounting stamps!

I started off by taking the rubber off the wood blocks - some people like to heat the stamp in the microwave for 10-15 seconds and then peel the rubber and foam off. I did this a few times but really the blocks are left with a bit of sticky on them and not useable. It also made my fingertips very sticky doing it this way.

So I jumped ahead to just peeling the rubber off the wood blocks (no heating) and leaving the foam on the block. If the rubber didn't come off with my fingernail I used an exacto knife to get it to start separating from the foam and then my fingers to peel it off the rest of the way.

That left me with lots of rubber to do something with.

So the first thing I tried was ez-mount and trimming with a hot knife. That was getting expensive because I had soooo many stamps to do and it took a long time. You had to make a jigsaw puzzle on the ez-mount with your stamps and then cut them out (not to mention the smell of burning foam!) and then try to figure out which sets the stamps went with! Oh BOY!

During this time I was also using cling film for my new stamps - ones that had not yet been mounted on the wood blocks. I'd just take the paper liner off the foam and then stick them on the cling. The cling film sheets weren't that expensive but to get more for your money you can buy the clear vinyl tablecloth (from Walmart in the fabric dept sold on the rolls). BUT again MORE cutting/trimming and sorting. This was also so time consuming!

Then I discovered Aleene's Tack It Over and Over (from Michaels) and I've been using that ever since. You just paint this glue on the back of the red rubber, leave it to dry, de-tack it a bit and then voila it's ready to use! You can do a ton of stamps in one sitting and even keep them in the case so there is no desparate re-sorting at the end of this process!

Someone posted on one of my groups that you can actually add Aleene's to the back of the paper liner on NEW stamps (before they're mounted) and that seemed to work but I've never tried it.

With unmounting to just rubber there was some concern about not having the foam for cushion and that the images wouldn't stamp very well. Well I got around that by stamping on a sheet of fun foam and it does the trick. The images do come out as nice as on the wood blocks - sometimes even better!
After the initial flurry of unmounting most of my stamps I decided to tackle my wheels.



You just cut the seam on the wheel rubber and peel it away from the plastic spool. There is no foam to deal with - just rubber strips! I write the name of the wheel in Sharpie on the back of the rubber. I store my wheels in one single storage box.
I had custom clear blocks made at a local glass shop for both the regular and jumbo wheels. I do not put Aleen's Tack It on these because they would then stick together in the box. Instead I used the double sided clear tape on the block and stick the rubber to the block when I need to use it.

The only stamps that I haven't unmounted are my alphas and background stamps. The alphas because they would be so much work and lots of little bits of rubber to contain and the backgrounds because they are easy enough to store on a bookshelf with a side label.
I have to confess that lately I haven't had time to do a major Aleen's Tack It session with my stamps (ok maybe I've accumulated more that I care to admit since the last time) and I've been getting by with putting double sided clear tape on my blocks and then pressing the rubber stamp onto it. It is temporary and it does work quite well!

Along with all this unmounting you have to consider a cataloging system - I wish that I continued stamping image inserts as I unmounted my stamps. But I got lazy/distracted/interrupted and stopped doing this after the first 50 or so!This would have made a great reference book for finding the stamps. I did try several times to come up with catalogs for my stamps but there are so many now and the task is too daunting for me right now!


For new stamps I'm tucking the sticker sheet into the CD case with the rubber.

I keep all of my stamps (mostly Stampin' Up!) in their original sets in empty CD cases in linen storage boxes (Martha Stewart from Michaels). Each box holds about 30 CD cases.


For comparison sake I want to show you these 2 photos. The first photo shows one shelf of approx 30 stamp sets (in their original cases) and the next photo shows approx 30 stamp sets stored in one CD storage box. 3 of these storage boxes fit on a shelf! So I'm working with them in categories in these storage boxes.
This is an old photo and now I have 9 boxes filled with Stampin' Up! stamps and another 5 filled with other company stamps!

I organize the boxes this way for Stampin' Up!

CURRENT - by alpha

RETIRED - alpha by themes

For non Stampin' Up! stamps I have separate boxes for each company and then I store them by theme.


The only drawback - again from a lack of catalog - is that I have to know what I'm looking for and then I look for it. I can't just browse at the images (in my non-existent catalog) and go for something that I might have forgotten that I have.

So I usually end up using the same stamps over and over again. Do you know what I mean?

Well if you've read this entire post I wan to thank you for sticking with me. I hope you found it informative and that it has helped you to make your unmounting decision!

If you want MORE information click on THIS LINK and it will take you to a list of all the unmounting posts here on my blog and you can see all the photos and instructions for what I've done.

Unmounting Wheels

Yesterday I posted on the Crafty Storage blog how I store my unmounted rubber wheel stamps.

I started unmounting my wheels a few years ago after seeing a blog post from Laura at Inky Dinky Doo.

To see that tutorial and learn more about unmounting rubber wheel stamps click HERE.

Unmounting your wood mounted rubber stamps!

Now that Stampin' Up! has come out with the cling mount option for woodless stamping everyone is jumping on the unmounting band wagon!

Not only does it save space (for us "stamp collectors") but it is also much easier to line up the stamps when stamping.

I ran out of room a long time ago and starting unmounting everything - including my wheels!

Click HERE to see all my UNMOUNTING posts.

What the heck??

You may look at this pile of rubber and wonder "what the heck is that Marie up to?"


Well I'll tell you - I've unmounted my WHEELS!!! Yes you read that right - I have unmounted my WHEELS.



I used to have 4 of these pants hangers FULL of wheels and more wheels in the Stampin' Up! Wheel Storage Cases. I really like the fact that wheels are affordable and easy to use - but gosh they were taking up so much space and I'm in a de-cluttering mood...

After seeing THIS POST by Laura - I decided that I would do this too and save space - not to mention the "wobbly wheel" uneven inking image problem.

Don't get me wrong - I did NOT unmount ALL my wheels - I only unmounted retired wheels. I even kept some old rubber on wheels - you know those "texture" type wheels like Speckled and Hot to Dot.

I'll apply Alleen's tack it over onto this rubber and then start looking for an acylic block that is big enough - 2 1/2 x 7 - to use these as stamps.

Kind of like smaller background stamps...

What do you think about that Jennifer Gray?