Safety Certification
AnTek Certification Inc. established a safety engineering department that provides a safety test laboratory for professional research and testing of product safety standards. Since its foundation in 2004, the safety engineering department has been dedicated to providing professional testing and certification service for our customers. Professional competence of the engineers and the testing capacities and instruments of the lab are improved continuously to obtain various lab accreditations, such as:
1. Passing IECEE's CB accreditation (CBTL)
2. Passing strict JET accreditation and obtaining TDAS certificate. Now, we can carry out PSE-certificated tests and make applications directly in our lab, providing more efficient and convenient Japanese certification services (diamond PSE, circle PSE & S-Mark)
3. Taiwan TAF accreditation Lab and BSMI designated lab
4. UL/CAP AA
5. CSA/ NEMKO / DEMKO / SEMKO / FIMKO / TÜV Rheinland/ TÜV SUD
6. VDE
We are now an established and publicly recognized professional safety certification lab in Taiwan and provide following services:
1. IT, Audio
2. Medical products
3. Batteries
4. Lamps (traditional and LED)
5. LED drivers
6. Plugs, sockets, and switches
7. Global energy saving requirements and tests
In addition to research on the technique standards of different countries, we are care about the development tendency of the techniques in the future.
We are very familiar with the administrative laws and regulations as well as the processes of application for certification markings. We have offices or subsidiaries in Japan, Korea, China, Singapore, Thailand, Australia, India, and Mexico, and cooperate with international testing laboratories to obtain markings and certificates for our customers rapidly.
Service is the core of our operating philosophy. We provide a complete technical advisory platform to reduce the "failure cost" that may occur at the initial stage of the certification. What are involved in such cost include the safety or production advisory service for initial development of customer's products and testing stage of samples. We also provide customers with advisory service of safety certification after the project is completed (including Initial Production Inspection (IPI), safety knowledge, service charge/annual fee, Variation Notice (VN) and so on.)
The following are the product types and standards that we focus on.
|
IEC/EN 61558-1+ |
Switch mode power supply units and transformers for switch mode power supply units |
Power supply |
Switching power supply |
|
IEC/EN 61558-1+ |
Transformers and power supplies for toys |
Transformer or power supply |
Toy transformer or power supply |
|
IEC/EN 62384 |
DC or AC supplied electronic control gear for LED modules — Performance requirements |
lamp product |
LED module - AC/DC electronic controller |
|
IEC/EN 60335-1+ |
Battery chargers |
Battery charger |
Battery charger equipment |
|
UL 2089 |
Vehicle Battery Adapters |
Vehicle charger |
Vehicle charger |
|
UL 153 |
Portable Electric Luminaires |
Portable lamp |
Portable lamp |
|
UL 1598 |
Luminaires |
Lamp |
Fixed lamp |
|
UL 8750 |
Standard for Light Emitting Diode (LED) Equipment for Use in Lighting Products |
LED lamp driver |
LED lamp |
|
IEC/EN 62133 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes-Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications |
Battery, cell products |
Chargeable/non-chargeable battery, cell |
|
UN38.3 |
Lithium metal and lithium ion batteries |
Battery, cell products |
Chargeable battery, cell |
|
O-PSE |
Lithium ion batteries |
Battery products |
Chargeable battery |
|
JIS C8714:2007 |
Safety tests for portable lithium ion secondary cells and batteries for use in portable electronic applications |
Secondary battery, cell products |
Chargeable battery, cell |
|
JIS C8712:2006 |
Safety requirements for portable sealed secondary cells, and batteries made from them, for use in portable applications |
Sealed small secondary battery, cell products |
Chargeable battery, cell |
|
GB/T 18287 |
General specification of lithium-ion battery for cellular phone |
Lithium-ion battery for cellular phones |
Chargeable battery |
|
YD 1268:2003 |
The safety specification and test method for lithium batteries and charger |
Lithium battery and charger for portable hand-held communication devices |
Chargeable battery, charger |
|
IEC/EN 61960:2004 (7.2.1, 7.2.2, 7.2.3) |
Secondary cells and batteries containing alkaline or other non-acid electrolytes-Secondary lithium cells and batteries for portable applications |
Secondary battery, cell products |
Chargeable/non-chargeable battery, cell |
|
IEC/EN60669 |
Switches for household and similar fixed-electrical installation- |
Common requirements for household switches and |
|
|
IEC/EN61058-1 |
Switches for appliances. General requirements |
Safety standards for switches of appliances |
|
|
IEC60884-1 |
Plugs and socket-outlets for household and similar purposes- |
Standards for household plugs and sockets and similar applications |
|
|
EN50075 |
Specification for flat non-wirable two-pole plugs 2.5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes |
Specifications for non-wire two-pole plugs 2.5A 250V with soft cords for connection of Class-II equipment for household and similar applications |
|
|
BS1363 |
13 A plugs, socket-outlets, adaptors and connection units. Specification for rewirable and non-rewirable 13 A fused plugs |
British standard 13 A plug, socket, adapter and connector test specifications |
|
|
AS/NZS3112 |
Approval and test specification—Plugs and socket-outlets |
Australian and New Zealand plug and socket test standards |
|
