Jump to content

Centripetal Catmull–Rom spline

From Wikipedia, the free encyclopedia

In computer graphics, the centripetal Catmull–Rom spline is a variant form of the Catmull–Rom spline, originally formulated by Edwin Catmull and Raphael Rom,[1] which can be evaluated using a recursive algorithm proposed by Barry and Goldman.[2] It is a type of interpolating spline (a curve that goes through its control points) defined by four control points , with the curve drawn only from to .

Catmull–Rom spline interpolation with four points

Definition

[edit]
Barry and Goldman's pyramidal formulation
Knot parameterization for the Catmull–Rom algorithm

Let denote a point. For a curve segment defined by points and knot sequence , the centripetal Catmull–Rom spline can be produced by:

where

and

in which ranges from 0 to 1 for knot parameterization, and with . For centripetal Catmull–Rom spline, the value of is . When , the resulting curve is the standard uniform Catmull–Rom spline; when , the result is a chordal Catmull–Rom spline.

Gif animation for uniform, centripetal and chordal parameterization of Catmull–Rom spline depending on the α value

Plugging into the spline equations and shows that the value of the spline curve at is . Similarly, substituting into the spline equations shows that at . This is true independent of the value of since the equation for is not needed to calculate the value of at points and .

3D centripetal Catmull-Rom spline segment.

The extension to 3D points is simply achieved by considering a generic 3D point and

Advantages

[edit]

Centripetal Catmull–Rom spline has several desirable mathematical properties compared to the original and the other types of Catmull-Rom formulation.[3] First, it will not form loop or self-intersection within a curve segment. Second, cusp will never occur within a curve segment. Third, it follows the control points more tightly.[4][vague]

In this figure, there is a self-intersection/loop on the uniform Catmull-Rom spline (green), whereas for chordal Catmull-Rom spline (red), the curve does not follow tightly through the control points.

Other uses

[edit]

In computer vision, centripetal Catmull-Rom spline has been used to formulate an active model for segmentation. The method is termed active spline model.[5] The model is devised on the basis of active shape model, but uses centripetal Catmull-Rom spline to join two successive points (active shape model uses simple straight line), so that the total number of points necessary to depict a shape is less. The use of centripetal Catmull-Rom spline makes the training of a shape model much simpler, and it enables a better way to edit a contour after segmentation.

Code example in Python

[edit]

The following is an implementation of the Catmull–Rom spline in Python that produces the plot shown beneath.

import numpy
import matplotlib.pyplot as plt


QUADRUPLE_SIZE: int = 4


def num_segments(point_chain: tuple) -> int:
    # There is 1 segment per 4 points, so we must subtract 3 from the number of points  
    return len(point_chain) - (QUADRUPLE_SIZE - 1)


def flatten(list_of_lists) -> list:
    # E.g. mapping [[1, 2], [3], [4, 5]] to  [1, 2, 3, 4, 5] 
    return [elem for lst in list_of_lists for elem in lst]


def catmull_rom_spline(
    P0: tuple,
    P1: tuple,
    P2: tuple,
    P3: tuple,
    num_points: int,
    alpha: float = 0.5,
):
    """
    Compute the points in the spline segment
    :param P0, P1, P2, and P3: The (x,y) point pairs that define the Catmull-Rom spline
    :param num_points: The number of points to include in the resulting curve segment
    :param alpha: 0.5 for the centripetal spline, 0.0 for the uniform spline, 1.0 for the chordal spline.
    :return: The points
    """

    # Calculate t0 to t4. Then only calculate points between P1 and P2.
    # Reshape linspace so that we can multiply by the points P0 to P3
    # and get a point for each value of t.
    def tj(ti: float, pi: tuple, pj: tuple) -> float:
        xi, yi = pi
        xj, yj = pj
        dx, dy = xj - xi, yj - yi
        l = (dx ** 2 + dy ** 2) ** 0.5
        return ti + l ** alpha

    t0: float = 0.0
    t1: float = tj(t0, P0, P1)
    t2: float = tj(t1, P1, P2)
    t3: float = tj(t2, P2, P3)
    t = numpy.linspace(t1, t2, num_points).reshape(num_points, 1)

    A1 = (t1 - t) / (t1 - t0) * P0 + (t - t0) / (t1 - t0) * P1
    A2 = (t2 - t) / (t2 - t1) * P1 + (t - t1) / (t2 - t1) * P2
    A3 = (t3 - t) / (t3 - t2) * P2 + (t - t2) / (t3 - t2) * P3
    B1 = (t2 - t) / (t2 - t0) * A1 + (t - t0) / (t2 - t0) * A2
    B2 = (t3 - t) / (t3 - t1) * A2 + (t - t1) / (t3 - t1) * A3
    points = (t2 - t) / (t2 - t1) * B1 + (t - t1) / (t2 - t1) * B2
    return points


def catmull_rom_chain(points: tuple, num_points: int) -> list:
    """
    Calculate Catmull-Rom for a sequence of initial points and return the combined curve.
    :param points: Base points from which the quadruples for the algorithm are taken
    :param num_points: The number of points to include in each curve segment
    :return: The chain of all points (points of all segments)
    """
    point_quadruples = (  # Prepare function inputs
        (points[idx_segment_start + d] for d in range(QUADRUPLE_SIZE))
        for idx_segment_start in range(num_segments(points))
    )
    all_splines = (catmull_rom_spline(*pq, num_points) for pq in point_quadruples)
    return flatten(all_splines)


if __name__ == "__main__":
    POINTS: tuple = ((0, 1.5), (2, 2), (3, 1), (4, 0.5), (5, 1), (6, 2), (7, 3))  # Red points
    NUM_POINTS: int = 100  # Density of blue chain points between two red points

    chain_points: list = catmull_rom_chain(POINTS, NUM_POINTS)
    assert len(chain_points) == num_segments(POINTS) * NUM_POINTS  # 400 blue points for this example

    plt.plot(*zip(*chain_points), c="blue")
    plt.plot(*zip(*POINTS), c="red", linestyle="none", marker="o")
    plt.show()
Plot obtained by the Python example code given above

Code example in Unity C#

[edit]
using UnityEngine;

// a single catmull-rom curve
public struct CatmullRomCurve
{
	public Vector2 p0, p1, p2, p3;
	public float alpha;

	public CatmullRomCurve(Vector2 p0, Vector2 p1, Vector2 p2, Vector2 p3, float alpha)
   {
		(this.p0, this.p1, this.p2, this.p3) = (p0, p1, p2, p3);
		this.alpha = alpha;
	}

	// Evaluates a point at the given t-value from 0 to 1
	public Vector2 GetPoint(float t)
    {
		// calculate knots
		const float k0 = 0;
		float k1 = GetKnotInterval(p0, p1);
		float k2 = GetKnotInterval(p1, p2) + k1;
		float k3 = GetKnotInterval(p2, p3) + k2;

		// evaluate the point
		float u = Mathf.LerpUnclamped(k1, k2, t);
		Vector2 A1 = Remap(k0, k1, p0, p1, u);
		Vector2 A2 = Remap(k1, k2, p1, p2, u);
		Vector2 A3 = Remap(k2, k3, p2, p3, u);
		Vector2 B1 = Remap(k0, k2, A1, A2, u);
		Vector2 B2 = Remap(k1, k3, A2, A3, u);
		return Remap(k1, k2, B1, B2, u);
	}

	static Vector2 Remap(float a, float b, Vector2 c, Vector2 d, float u)
    {
		return Vector2.LerpUnclamped(c, d, (u - a) / (b - a));
	}

	float GetKnotInterval(Vector2 a, Vector2 b)
    {
		return Mathf.Pow(Vector2.SqrMagnitude(a - b), 0.5f * alpha);
	}
}


using UnityEngine;

// Draws a catmull-rom spline in the scene view,
// along the child objects of the transform of this component
public class CatmullRomSpline : MonoBehaviour
{
	[Range(0, 1)]
    public float alpha = 0.5f;
	int PointCount => transform.childCount;
	int SegmentCount => PointCount - 3;
	Vector2 GetPoint(int i) => transform.GetChild(i).position;

	CatmullRomCurve GetCurve(int i)
    {
		return new CatmullRomCurve(GetPoint(i), GetPoint(i+1), GetPoint(i+2), GetPoint(i+3), alpha);
	}

	void OnDrawGizmos()
    {
		for (int i = 0; i < SegmentCount; i++)
			DrawCurveSegment(GetCurve(i));
	}

	void DrawCurveSegment(CatmullRomCurve curve)
    {
		const int detail = 32;
		Vector2 prev = curve.p1;

		for (int i = 1; i < detail; i++)
        {
			float t = i / (detail - 1f);
			Vector2 pt = curve.GetPoint(t);
			Gizmos.DrawLine(prev, pt);
			prev = pt;
		}
	}
}

Code example in Unreal C++

[edit]
float GetT( float t, float alpha, const FVector& p0, const FVector& p1 )
{
    auto d  = p1 - p0;
    float a = d | d; // Dot product
    float b = FMath::Pow( a, alpha*.5f );
    return (b + t);
}

FVector CatmullRom( const FVector& p0, const FVector& p1, const FVector& p2, const FVector& p3, float t /* between 0 and 1 */, float alpha=.5f /* between 0 and 1 */ )
{
    float t0 = 0.0f;
    float t1 = GetT( t0, alpha, p0, p1 );
    float t2 = GetT( t1, alpha, p1, p2 );
    float t3 = GetT( t2, alpha, p2, p3 );
    t = FMath::Lerp( t1, t2, t );
    FVector A1 = ( t1-t )/( t1-t0 )*p0 + ( t-t0 )/( t1-t0 )*p1;
    FVector A2 = ( t2-t )/( t2-t1 )*p1 + ( t-t1 )/( t2-t1 )*p2;
    FVector A3 = ( t3-t )/( t3-t2 )*p2 + ( t-t2 )/( t3-t2 )*p3;
    FVector B1 = ( t2-t )/( t2-t0 )*A1 + ( t-t0 )/( t2-t0 )*A2;
    FVector B2 = ( t3-t )/( t3-t1 )*A2 + ( t-t1 )/( t3-t1 )*A3;
    FVector C  = ( t2-t )/( t2-t1 )*B1 + ( t-t1 )/( t2-t1 )*B2;
    return C;
}

See also

[edit]

References

[edit]
  1. ^ Catmull, Edwin; Rom, Raphael (1974). "A class of local interpolating splines". In Barnhill, Robert E.; Riesenfeld, Richard F. (eds.). Computer Aided Geometric Design. pp. 317–326. doi:10.1016/B978-0-12-079050-0.50020-5. ISBN 978-0-12-079050-0.
  2. ^ Barry, Phillip J.; Goldman, Ronald N. (August 1988). A recursive evaluation algorithm for a class of Catmull–Rom splines. Proceedings of the 15st Annual Conference on Computer Graphics and Interactive Techniques, SIGGRAPH 1988. Vol. 22. Association for Computing Machinery. pp. 199–204. doi:10.1145/378456.378511.
  3. ^ Yuksel, Cem; Schaefer, Scott; Keyser, John (July 2011). "Parameterization and applications of Catmull-Rom curves". Computer-Aided Design. 43 (7): 747–755. CiteSeerX 10.1.1.359.9148. doi:10.1016/j.cad.2010.08.008.
  4. ^ Yuksel; Schaefer; Keyser, Cem; Scott; John. "On the Parameterization of Catmull-Rom Curves" (PDF).{{cite web}}: CS1 maint: multiple names: authors list (link)
  5. ^ Jen Hong, Tan; Acharya, U. Rajendra (2014). "Active spline model: A shape based model-interactive segmentation" (PDF). Digital Signal Processing. 35: 64–74. arXiv:1402.6387. doi:10.1016/j.dsp.2014.09.002. S2CID 6953844.
[edit]