Jump to content

WordPerfect

0% developed
From Wikibooks, open books for an open world

Tweaking the Classic Mode of WP 12 to improve the emulation of WPDOS 5.1

[edit | edit source]

This section contains tips for tweaking Corel WordPerfect 12, so that Classic Mode emulates WP 5.1 for DOS more closely. For a more complete review of Classic Mode, see WordPerfect 12.

The following abbreviations are used below:

  • WP 12: Corel WordPerfect 12 (for Windows)
  • WP 5.1: WordPerfect 5.1 DOS

WordPerfect 12 already has a 5.1 version setting in workspace manager under the tools menu.

Entering Classic Mode

[edit | edit source]

When WP 12 starts for the first time, it will give you the choice to first select one of several emulation modes. If this choice is not presented, select Tools, Workspace Manager, Classic Mode.

Tweaking Reveal Codes

[edit | edit source]

Select Tools, Settings, Display, Reveal Codes. Uncheck "Use system colors". Change the text color to white, and the Background to DOS blue by chosing "More" and entering this color: (R,G,B=0,0,168). For an even closer WP 5.1 experience, change the font to Fixedsys. Note that this font cannot be adjusted in size, and may be too small. If necessary, try Courier New. When you have chosen View, Zoom, "Margin width" you should use a font of about 14 to match a font size in your document of 12. Uncheck "Show spaces as bullets".

Tweaking the Application Bar

[edit | edit source]

Right-click on the Application Bar at the bottom of the window and choose Settings. Uncheck Digital Signature. Check Num Lock State. Uncheck Printer. Uncheck Shadow Cursor On/Off. Double click on the Num Lock icon to change it to NUM. Double click on the AB icon to change it to CAPS. Drag CAPS completely to the right. Drag Insert/Typeover (General Status) completely to the left.

Tweaking the menu bar

[edit | edit source]

Still to be written

Reverting to the default settings for Classic Mode

[edit | edit source]

This section explains how to revert to the default settings for Classic Mode. (This is necessary because not all initial settings can be preserved by saving to a template. Templates contain changes made in Settings (Shift-F1), Customize, but not Settings (Shift-F1), Display.)

Un-tweaking Reveal Codes

[edit | edit source]

Select Tools, Settings, Display, Reveal Codes. Check "Use system colors". Check "Show spaces as bullets". Select Font, Arial, 10.

Un-tweaking the Application Bar

[edit | edit source]

Right-click the Application Bar at the bottom of the window and choose Settings. Check Digital Signature. Uncheck Num Lock State. Check Printer. Check Shadow Cursor On/Off. Double click the NUM icon to change it to a Num Lock icon. Double click CAPS to change it to the AB icon. Drag CAPS completely to the left. Drag Insert/Typeover (General Status) to the left of the position (Combined Position).