Changeset 268 for trunk/dll/ipf/util.ipf

Timestamp:

Dec 8, 2005, 7:15:10 AM (20 years ago)

Author:

root

Message:

Update help text, bitmaps and icons

File:

• trunk/dll/ipf/util.ipf (modified) (7 diffs)

trunk/dll/ipf/util.ipf

@@ -4 +4 @@
 FM/2 offers several utilities to make your life a little easier&colon.
 :p.
-:link reftype=hd res=100045.Remap drives:elink.
-.br
 :link reftype=hd res=90100.Collector:elink.
 .br
@@ -34 +32 @@
 :hp2.System Setup:ehp2. folder, and command line windows from this menu.
 
-:h2 res=100045 name=PANEL_REMAP.Remap drives
-:i1 id=aboutRemap.Remap drives
-
-To remap (attach) a remote server to a local drive letter, enter the
-UNC server name in the entry field at the top center of this dialog,
-then select the drive letter from the left (attach) listbox to which to
-attach the server.  Finally, click the :hp1.Attach:ehp1. button.
-:p.
-To detach a local drive letter from a remote server, select the
-drive letter from the right (detach) listbox, then click the
-:hp1.Detach:ehp1. button.
-:p.
-When you're through remapping drives, click :hp1.Done:ehp1..
-:p.
-According to IBM LAN Server documentation, a UNC name consists of a
-double backslash, the name of the server, another backslash, and the
-name of the resource&colon.  \\servername\netname
-:p.
-Note that FM/2 saves the UNC names you enter in the listbox below the
-entry field.  You can recall these names later by clicking on them.
-The :hp1.Delete:ehp1. button deletes the currently selected name from
-the listbox, and the :hp1.Clear:ehp1. button removes all names from
-the listbox.  Names are added automatically.  Up to 200 names can be
-stored in this manner (kept on disk between sessions in a file named
-RESOURCE.DAT).
-
 .im collect.ipf
 
 .im comp.ipf
 
-:h2 res=92500 name=PANEL_UNDELETE.Undelete Files
-:i1 id=aboutUndelete.Undelete Files
-
-:artwork name='..\..\bitmaps\undelete.bmp' align=center.
-This leads to a dialog that interfaces with UNDELETE.COM to allow you to
-undelete files.  The drive that will be operated on is determined by the
-highlighted object in the directory tree.  This dialog filters out files
-that already exist on the disk.
-:p.
-The :hp1.Mask:ehp1. entry field lets you set a mask (which can include
-a directory path).  You can switch drives using the dropdown listbox.
-A :hp1.Subdirs:ehp1. button lets you choose whether to show files that
-can be undeleted in subdirectories as well.
-:p.
-You can always go directly to UNDELETE.COM if you have the need for more
-control.  This is provided only for convenience.
+.im inis.ipf
 
 :h2 res=92600 name=PANEL_KILLPROC.Kill Processes
 :i1 id=aboutKillProc.Kill Processes
 :artwork name='..\..\bitmaps\killproc.bmp' align=center.
+:p.
 This leads to a dialog that allows you to kill most renegade processes.
 If you run into a window that just won't close, or one that hides itself
 but doesn't quite go away, this may let you kill the hung process.
 :p.
-Obviously you'll want to exercise some care here.  FM/2 will remove its
+Obviously you'll want to exercise some care here. FM/2 will remove its
 own PID (Process ID) from the list, but if you ran it from a command
-line you could still kill FM/2 by killing its parent.  You can also kill
-off the WPS (PMSHELL.EXE), but it should restart itself.  Some kernal
+line you could still kill FM/2 by killing its parent. You can also kill
+off the WPS (PMSHELL.EXE), but it should restart itself. Some kernal
 processes show up but can't be killed.
 :p.
 A checkbox allows you to set the Process Killer to use the undocumented
-DosQProcStat API instead of parsing PSTAT.EXE's output.  While this
+DosQProcStat API instead of parsing PSTAT.EXE's output. While this
 removes the requirement of having an English version of PSTAT.EXE, you
 should be aware that the DosQProcStat can be changed by IBM without
 notice, possibly causing the Process Killer to fail and/or trap.
 
-:h2 res=92700 name=PANEL_INSTANT.Instant Batch File
+:h2 res=92700 name=PANEL_INSTANT.Instant CMD File
 :i1 id=aboutInstant.Instant Batch File
 :artwork name='..\..\bitmaps\instant.bmp' align=center.
-This leads to a dialog that lets you quickly hack together a batch
-(command) file and run it (the currently highlighted tree directory will
-be its default directory).  The command file isn't saved; think of it as
+:p.
+This leads to a dialog that lets you quickly hack together a command
+(batch) file and run it (the currently highlighted tree directory will
+be its default directory). The command file isn't saved; think of it as
 an "extended command line" which allows you to enter more than one line
 at a time (for instance, when several tests must be made).
-
-:h2 res=92800 name=PANEL_COMMANDLINE.Command Line
-:i1 id=aboutCommandLine.Command Line
-:artwork name='..\..\bitmaps\cmdline.bmp' align=center.
-This brings up a windowed OS/2 command line.  F9 is the accelerator key
-for this command.
-:p.
-There are also commands to bring up a windowed DOS command line and
-a Win-OS/2 full screen session.
-
-.im inis.ipf
 
 :h2 res=94800 name=PANEL_VIEWINFS.View Bookshelf
@@ -124 +72 @@
 FM/2 presents a listbox containing all the .INF files found in the
 directories listed in your BOOKSHELF environment variable (see
-SET BOOKSHELF= in CONFIG.SYS).  You select the .INF file(s) you want
+SET BOOKSHELF= in CONFIG.SYS). You select the .INF file(s) you want
 to view, then click the :hp1.View:ehp1. button.
 :p.
 If you selected more than one .INF file, FM/2 calls VIEW.EXE in such
 a way that all the files are presented at once (a single contents
-page appears listing the contents of all the .INF files).  Warning:
+page appears listing the contents of all the .INF files). Warning:
 Don't select more than one filename with the same title (left column
-of listbox) -- View.exe will choke if you do, and be unable to read any
-of the files.
+of listbox) -- IBM's View.exe will choke if you do, and be unable to read any
+of the files. However Newview works fine.
 :p.
 You can enter text into the entry field below the listbox, and FM/2 will
-try to find the first listbox entry with matching text as you go.  If
+try to find the first listbox entry with matching text as you go. If
 you click :hp1.Select:ehp1. FM/2 will highlight all matching entries
 (hint: empty the entry field and click Select to unhighlight
-everything).  If you click :hp1.Filter:ehp1. FM/2 will remove all but
+everything). If you click :hp1.Filter:ehp1. FM/2 will remove all but
 highlighted items from the listbox (:hp1.Rescan:ehp1. will refill the
 listbox).
@@ -144 +92 @@
 The :hp1.AddDirs:ehp1. button will copy the contents of the entry field
 and add it to the directories listed in the BOOKSHELF environment variable.
-It should be in the same format as the HELP environment variable uses,
-fully qualified directory names separated by semi-colons.  The next time you
+It should be in the same format that the BOOKSHELF environment variable uses,
+fully qualified directory names separated by semi-colons. The next time you
 use the Bookshelf Viewer, FM/2 will remember this input and use it. This
 is an internal addition; your CONFIG.SYS and environment are not
@@ -155 +103 @@
 :p.
 When you're done with the dialog, press [ESCape] or click
-:hp1.Cancel:ehp1..  Any open .INF files remain open until you close them
+:hp1.Cancel:ehp1.. Any open .INF files remain open until you close them
 (hint&colon. F3 will close an .INF file).
 :p.
-Note&colon.  this dialog is shared by the :hp2.:link reftype=hd
+Note&colon. this dialog is shared by the :hp2.:link reftype=hd
 res=94850.View Helpfiles:elink.:ehp2. and :hp2.View Bookshelf:ehp2.
 commands. If you click on either while this dialog is up, the dialog is
-simply brought to the foreground.  Close it if you want to switch
+simply brought to the foreground. Close it if you want to switch
 function. (This doesn't apply if you started this from the Bookshelf
 Viewer object in the FM/2 WPS folder.)
@@ -169 +117 @@
 FM/2 presents a listbox containing all the .HLP files found in the
 directories listed in your HELP environment variable (see SET HELP= in
-CONFIG.SYS).  You select the .HLP file you want to view, then click
+CONFIG.SYS). You select the .HLP file you want to view, then click
 the :hp1.View:ehp1. button.
 :p.
@@ -177 +125 @@
 The :hp1.AddDirs:ehp1. button will copy the contents of the entry field
 and add it to the directories listed in the HELP environment variable.
-It should be in the same format as the HELP environment variable uses,
-fully qualified directory names separated by semi-colons.  The next time
-you use the Bookshelf Viewer, FM/2 will remember this input and use it.
+It should be in the same format that the HELP environment variable uses,
+fully qualified directory names separated by semi-colons. The next time
+you use the HELP Viewer, FM/2 will remember this input and use it.
 This is an internal addition; your CONFIG.SYS and environment are not
 modified.
 :p.
 When you're done with the dialog, press [ESCape] or click
-:hp1.Cancel:ehp1..  Any open .HLP file will remain open until you close
+:hp1.Cancel:ehp1.. Any open .HLP file will remain open until you close
 it.
 :p.
-Note&colon.  this dialog is shared by the :hp2.:link reftype=hd
+Note&colon. this dialog is shared by the :hp2.:link reftype=hd
 res=94800.View Bookshelf:elink.:ehp2. and :hp2.View Helpfiles:ehp2.
 commands. If you click on either while this dialog is up, the dialog is
-simply brought to the foreground.  Close it if you want to switch
+simply brought to the foreground. Close it if you want to switch
 function. (This doesn't apply if you started this from the Helpfile
-Viewer object in the FM/2 WPS folder.)
+Viewer object in the FM/2 WPS folder or from the command line.)
 
+:h2 res=92800 name=PANEL_COMMANDLINE.Command Lines
+:i1 id=aboutCommandLine.Command Lines
+:artwork name='..\..\bitmaps\cmdline.bmp' align=center.
+:p.
+There are three different command line choices. The first 
+brings up a windowed OS/2 command line. F9 is the accelerator key
+for this command. The last two bring up a windowed DOS command line and
+a Win-OS/2 full screen session respectively but only if you have installed DOS and 
+Win-OS/2 support.
+