This stable release fixes the following issues:

• This release contains security updates as disclosed in the Dell Security Advisory DSA2023-113, DSA2023-152, DSA2023-174, DSA2023-175, DSA2023-176, DSA2023-180, and DSA2023-190.

This stable release fixes the following issues:

• This release contains security updates as disclosed in the Dell Security Advisory DSA2023-113.
• Fixed the issue where the system does not boot into the Preboot Execution Environment (PXE) from the Dell Dock WD19S.This issue occurs when you disable the Enable USB Boot Support option in the BIOS setup.

This stable release fixes the following issues:

• Fixed the issue where system cannot connect to the BIOSConnect server with all the supported WLAN cards.

-Fixed the issue where a small logo screen is displayed first and later switches to the full screen logo.This issue occurs when the Full Screen Logo option is enabled and you boot the system

-Fixed the issue where the system reboots repeatedly when USB bootable devices with longer product name and serial number are connected to the system

• Fixed the issue where:

the CPU speed runs at a lower frequency when VT and VT-d are disabled in the BIOS setup.This issue occurs when the system resumes from sleep mode.

• Firmware updates to address security vulnerabilities including Common Vulnerabilities and Exposures such as:

2022-30704, 2022-33894, 2022-26343, 2022-32231, and 2022-38090.

• Fixes:

The Show Password option is not displayed under the Wi-Fi in the BIOS setup.

The system auto wakes up on days not selected by you in the Auto On Time function in the BIOS setup.

Fixed the issue where:

• the system does not boot into the Preboot Execution Environment (PXE) when the Wake on Lan feature is enabled in BIOS.This issue occurs when you use the Dell Command | PowerShell Provider to enable the ForcePXEOnNextBoot option.
• the system stops responding during power-on.This issue occurs when the system boots to WinPE with an Innodisk USB drive.
• you cannot bypass the system or hard drive password in the BIOS setup.
• the Dell logo is not displayed completely when you run the Power-On Self-Test (POST).
• the System Management icon is not displayed under the Advanced Test in the Pre-Boot System Assessment (ePSA) in the BIOS setup.
• the Show Password option is not displayed under the Wi-Fi in BIOSConnect.
• you cannot bypass the system or hard drive password in the BIOS setup.

Enhancements:

• Improved the speed of the power-on self-test (POST).

This stable release fixes the following issues:

• Fixed the issue where a black screen is displayed when you turn on the system.This issue occurs on the systems with the Intel i7 processor and 8 GB of memory.
• Fixed the issue where the system does not auto wake.This issue occurs when you check Saturday under the Select Days option in the Auto On Time in the BIOS setup.
• Fixed the issue where the BIOS recovery function fails after pressing Ctrl + Esc.

This stable release fixes the following issues:

• Fixed the issue where the system displays a black screen when you wake the system from Hibernate mode through Wake on LAN.
• Fixed the issue where NV