This stable release fixes the following issues:

• Improved the stability of the system.

This stable release fixes the following issues:

• This release contains security updates as disclosed in the Dell Security Advisories.

This stable release fixes the following issues:

• This release contains security updates

This stable release fixes the following issues:

• This package contains the Dell system BIOS update.BIOS is a firmware package that is embedded on a small memory chip on the system board.It controls the keyboard, monitor, disk drives, and other devices.

This stable release fixes the following issues:

• This release contains security updates

This stable release fixes the following issues:

• Fixed the issue where the system stops responding at the BIOS Auto-Recovery screen when you update the BIOS
• This release contains security updates

This stable release fixes the following issues:

*This release contains security updates.

This stable release fixes the following issues:

*This release contains security updates

This stable release fixes the following issues:

*This release contains security updates

This stable release fixes the following issues:

• Fixed the issue where the BIOS admin password cannot be set if Dell Encryption PBA is active.
• Fixed the issue where the system can boot on the bootable key when the BIOS admin password is set.

This stable release fixes the following issues:

• This release contains security updates.

This stable release fixes the following issues:

• This release contains security updates.

This stable release fixes the following issues:

• This release contains security updates.
• Fixed the issue where the system does not boot into the Preboot Execution Environment (PXE) from the Dell Dock WD19S.This issue occurs when you disable the Enable USB Boot Support option in the BIOS setup.
• Fixed the issue where the system cannot resume from sleep state when the Cox Automotive application is installed on the system.

This stable release fixes the following issues:

• This release contains security updates.
• Fixed the issue where system cannot connect to the BIOSConnect server with all the supported WLAN cards.

This stable release fixes the following issues:

• Fixed the issue where a small logo screen is displayed first and later switches to the full screen logo.This issue occurs when the Full Screen Logo option is enabled and you boot the system.
• Fixed the issue where the system reboots repeatedly when USB bootable devices with longer product name and serial number are connected to the system.
• Fixed the issue where the CPU speed runs at a lower frequency when VT and VT-d are disabled in the BIOS setup.This issue occurs when the system resumes from sleep mode.
• Fixed the issue where the Cypress Power Delivery firmware update fails when the system is connected to the Dell DA310 USB-C Multiport adapter.
• Removed the unsupported User Selectable Thermal table in Dell Optimizer.

This stable release fixes the following issues:

• Fixed the issue where the Show Password option is not displayed under the Wireless Networks in the BIOS setup.
• Fixed the issue where the system auto wakes up on days not selected by you in the Auto On Time function in the BIOS setup.

This stable release fixes the following issues:

• Firmware updates to address security vulnerabilities.

This stable release fixes the following issues:

• Fixed the issue where the system does not boot into the Preboot Execution Environment (PXE) when the Wake on Lan feature is enabled in BIOS.This issue occurs when you use the Dell Command | PowerShell Provider to enable the ForcePXEOnNextBoot option.
• Fixed the issue where Reboot Bypass does not work after rebooting the system.This issue occurs when you set Password Bypass from Disable to Reboot Bypass in the BIOS setup menu and install Dell Command Monitor (DCM) version 10.7.0.232.
• Fixed the issue where the system outputs characters without you pressing any keys on the keyboard.This issue occurs when you connect a USB and an optical drive simultaneously.
• Fixed the issue where the system stops responding during power-on.This issue occurs when the system boots to WinPE with an Innodisk USB drive.
• Fixed the issue where the BitLocker recovery message is displayed more than once during the power-on self-test (POST).This issue occurs when you attempt to change a setup option in the BIOS setup, and turn on the BitLocker encryption.

This stable release fixes the following issues:

• Firmware updates to address security vulnerabilities.

This stable release fixes the following issues:

• Fixed the issue where the ESC key on the system keyboard stops working in the BIOS setup.This issue occurs when an external USB keyboard is connected to the system.
• Fixed the issue where the admin password window is displayed when you run the Pre-Boot System Assessment (ePSA) in the BIOS setup.
• Fixed the issue where the system stops responding at the Dell logo while booting.
• Improved the system performance by turning on the disabled option under Active State Power Management in the BIOS setup menu.

This stable release fixes the following issues:

• Firmware updates to address security vulnerabilities including.

This stable release fixes the following issues:

• Fixed the issue where the Alt Gr key on the keyboard does not work in BIOS Setup Menu.
• Fixed the issue where the system shuts down unexpectedly.
• Fixed the issue where the Wi-Fi cannot be launched.This issue occurs when you set the Wi-Fi connection through a BIOSConnect enterprise profile.
• Fixed the issue where an unsupported Power option is displayed in Dell Optimizer.

Some new functionality has also been added:

• Updated the options in Absolute settings under Security tab in the BIOS setup.
• Added the Self-Healing Image Recovery (SHIR) and Connect Provisioning to improve the operating system recovery using BIOSConnect.

This stable release fixes the following issues:

*Fixed the issue where the system stops responding at the Dell logo screen when a USB device is connected.

*Firmware updates to address security vulnerabilities.

This stable release fixes the following issue:

• Fixed the issue where the system stops responding when icons are clicked quickly in the Pre-Boot Assessment (ePSA).

This stable release fixes the following issues:

• Firmware updates to address security vulnerabilities.

-Fixed the issue where an error message is displayed on the BIOS auto recovery screen when the BIOS update fails.

-Fixed the issue where auto recovery happens twice when trying to perform BIOS auto recovery.

-Fixed the issue where Multi-Display option is not displayed in BIOS setup menu when AMD Radeon Pro W5700 graphic card is installed.

-Fixed the issue where Dell SupportAssist OS Recovery does not work when the system is only connected with Intel AX210 Wi-Fi card.

-Added a dialog box for the user to save Pre-boot System Diagnostics logs in a storage media before exiting the Diagnostics.

Fixed the issue where Thunderbolt device cannot be detected in systems with Linux operating system.

Fixed the issue where optical drive failure error message is displayed when you run Dell SupportAssist Quick Test.This issue occurs when SATA optical drive is connected to the system.

*Fixed the issue where non-English keyboards are not detected by Dell Data Protection Encryption.

*Fixed the issue where non-WLAN cards connected to PCIe Slot 3 are not recognized and displayed in BIOS Setup menu.This issue occurs after WLAN is disabled in BIOS Setup menu.

*Reduced the fan noise.

Firmware updates to address security vulnerabilities.

Fixed the issue where systems with Intel 11th generation processors do not boot.

Fixed the issue where the Type-C, HDMI, DisplayPort, and VGA ports stop working after updating the BIOS.

Fixed the issue where a Windows error message is displayed after system resumes from Sleep state.This issue occurs on systems with M.2 solid state drives after setting the hard drive password.

Fixed the issue where the system cannot boot to operating system successfully.

Fixed the issue where hard drive password is prompted while booting after the SED is encrypted with McAfee opal.This issue occurs on Toshiba and Samsung SEDs.

Fixed the issue where systems with Intel 11th generation processors do not boot.

Firmware updates to address security vulnerabilities.

*Updated the chassis intrusion security feature to restrict booting when a chassis intrusion detected.

*Fixed the issue where data wipe cannot be performed on systems with Seagate ESG hard drive.

*Fixed the issue where systems with Seagate ESG Hard drive cannot set hard drive password.

*Fixed the issue where an error message is displayed on systems with Intel core i9-11900 and i9-11900K, i7-11700K, W-1370P, W-1390, and W-1390P processors.

*Fixed the issue where systems with Intel 11th generation processors do not boot.

*Supports resizable base address register (BAR) to improve the graphics performance.

This stable release fixes the following issue:

*Firmware updates to address security vulnerabilities.

Firmware updates to address security vulnerabilities.

Fixed the issue where the system that is shut down does not wake up through Wake-on-LAN.

Fixed the issue where the system displays error message when installing Ubuntu operating system.

Fixed the issue where the BIOS recovery through M.2 PCIe SSD-2, M.2 PCIe SSD-3, and SATA hard drive fails.

Fixed the issue where Thunderbolt 4 device stops working after the system resumes from Sleep mode or Hibernate mode or after shutdown.

Fixed the issue where Dell Data Protection | Encryption Enterprise Edition (DDPE) cannot encrypt NVME SED devices.This issue occurs on systems with DDPE version v10 and BIOS version 1.0.7 or earlier.

Fixed the issue where a system with 4 DIMMs connected fails to enter operating system when you turn on the system.This issue occurs on systems with 10th generation Intel processors (Intel Comet Lake S).

Fixed the issue where SATA Operation in the BIOS setup cannot be changed after upgrading the BIOS to version 1.0.7.

Fixed the issue where an error message that says Network 1 - Failed with Deice Error is displayed while running Enhanced Pre-Boot System Assessment (ePSA).

Enabled AMD graphics and Type-C ports management through Enable Rear USB Ports option in the BIOS.

Initial Release

Initial Release.