This stable release fixes the following issues:

• Improved the stability of the system.

This stable release fixes the following issues:

• This release contains security updates as disclosed in the Dell Security Advisories DSA2024-243, and DSA2024-297.

This stable release fixes the following issues:

• BIOSConnect DPF v2.35.0 Release.
• DCSV-2795:CPG BIOS: Dell UEFI - DellNtfsDxe.efi - Buffer Overflow(VRT-19535).
• [Sustain] CPSE-21421 [PlatCfg]: Getting error as "PCDATA invalid Char" when we open XML file.
• [Sustain] CPSE-23670 KB555t-Elrond-LITEON-P1 : Unable to boot to windows after exiting BIOS.
• [Sustain] CPSE-24936 EDK2 HPET timer as timer interrupt source issue check with AMI platform.

This stable release fixes the following issues:

• Fixed the issue where some dots are displayed in the Enter old password field after you change the hard drive or solid state drive password.

This stable release fixes the following issues:

• This release contains security updates as disclosed in the Dell Security Advisory DSA2024-066.

This stable release fixes the following issues:

• This release contains security updates as disclosed in the Dell Security Advisory DSA2024-030.For more information.
• Fixed the issue where the system stops responding at the BIOS Auto-Recovery screen when you update the BIOS.

This stable release fixes the following issues:

• Fixed the issue where the system reboots repeatedly and stops responding at the Dell Logo.This issue occurs when a system with an NVIDIA graphics card is connected to an 8K monitor
• This release contains security updates as disclosed in the Dell Security Advisories DSA2023-191, DSA2023-344, DSA2023-362, DSA2023-364, DSA2023-449, and DSA2023-467.

This stable release fixes the following issues:

• This release contains security updates as disclosed in the Dell Security Advisory DSA2023-359.
• Fixed the issue where the BIOS admin password cannot be set if Dell Encryption PBA is active.
• Fixed the issue where the system can boot on the bootable key when the BIOS admin password is set.
• Fixed the issue where the system stops responding during Power-On Self-Test (POST).This issue occurs when the NVMe or Trusted Platform Module firmware is interrupted while updating the firmware
• Fixed the issue where the Admin Unlock window in the BIOS setup stops responding or the system reboots automatically.This issue occurs when you enter the wrong Master Password in the system password prompt by pressing CTRL+Enter.

This stable release fixes the following issues:

• This release contains security updates as disclosed in the Dell Security Advisory DSA2023-113, DSA2023-152, DSA2023-174, DSA2023-175, DSA2023-176, DSA2023-180, and DSA2023-190.

This stable release fixes the following issues:

• This release contains security updates as disclosed in the Dell Security Advisory DSA2023-113.
• Fixed the issue where the system does not boot into the Preboot Execution Environment (PXE) from the Dell Dock WD19S.This issue occurs when you disable the Enable USB Boot Support option in the BIOS setup.

This stable release fixes the following issues:

• Fixed the issue where system cannot connect to the BIOSConnect server with all the supported WLAN cards.

-Fixed the issue where a small logo screen is displayed first and later switches to the full screen logo.This issue occurs when the Full Screen Logo option is enabled and you boot the system

-Fixed the issue where the system reboots repeatedly when USB bootable devices with longer product name and serial number are connected to the system

Firmware updates to address security vulnerabilities including CVE such as: 2022-30704, 2022-33894, 2022-26343, 2022-32231 and 2022-38090.

Fixed the issue where:

• the Show Password option is not displayed under the Wi-Fi in the BIOS setup.
• the system auto wakes up on days not selected by you in the Auto On Time function in the BIOS setup.
• the CPU speed runs at a lower frequency when VT and VT-d are disabled in the BIOS setup.This issue occurs when the system resumes from sleep mode.

Fixed the issue where:

the Show Password option is not displayed under the Wi-Fi in the BIOS setup.

the system auto wakes up on days not selected by you in the Auto On Time function in the BIOS setup.

This stable release fixes the following issues:

• Update Microcode and ACM.

Some new functionality has also been added:

• Set downgrade restrictions.

Fixed the issue where

• the system does not boot into the Preboot Execution Environment (PXE) when the Wake on Lan feature is enabled in BIOS.This issue occurs when you use the Dell Command | PowerShell Provider to enable the ForcePXEOnNextBoot option.
• the system stops responding during power-on.This issue occurs when the system boots to WinPE with an Innodisk USB drive.
• you cannot bypass the system or hard drive password in the BIOS setup.
• the Dell logo is not displayed completely when you run the Power-On Self-Test (POST).
• the System Management icon is not displayed under the Advanced Test in the Pre-Boot System Assessment (ePSA) in the BIOS setup.
• the Show Password option is not displayed under the Wi-Fi in BIOSConnect.
• you cannot bypass the system or hard drive password in the BIOS setup.
• you cannot update the power delivery firmware of a Type-C docking station.

Enhancements:

• Improved the speed of the power-on self-test (POST).

This stable release fixes the following issues:

• Firmware updates to address security vulnerabilities including (Common Vulnerabilities and Exposures - CVE) such as:

CVEs-2021-23223, 2021-37409, 2021-44545, 2022-21212,

2022-21197, 2022-21160, 2022-21139, 2022-21172,

2022-21240, 2022-26047, 2022-32482,

2022-21198, 2022-26343, and 2022-34400.

This stable release fixes the following issues:

• Fixed the issue where a black screen is displayed when you turn on the system.This issue occurs on the systems with the Intel i7 processor and 8 GB of memory.
• Fixed the issue where the system does not auto wake.This issue occurs when you check Saturday under the Select Days option in the Auto On Time in the BIOS setup.
• Fixed the issue where the BIOS recovery function fails after pressing Ctrl + Esc.

This stable release fixes the following issues:

• Fixed the issue where the Speccy application displays incorrect PCIe slots detail.
• Fixed the issue where the power button stops working after the BIOS upgrade.This issue occurs when you upgrade the BIOS from version 1.0.13 and earlier.

Enhancements:

• Added a dialog box for the user to save Pre-boot System Diagnostics logs in a storage media before exiting the Diagnostics.

This stable release fixes the following issues:

• Fixed the issue where the system displays a black screen when you wake the system from Hibernate mode through Wake on LAN.
• Fixed the issue where NVMe storage device in the BIOS Setup menu displays None when M.2 PCIe SSD is installed on the system.
• Fixed the issue where the DVD drive icon status in the taskbar is not refreshed automatically.

Fixed the issue where the BIOS recovery through M.2 PCIe SSD-2, M.2 PCIe SSD-3, and SATA hard drive fails.

Fixed the issue where the system with single SATA hard drive cannot initiate BIOS recovery.

Supports 10th generation Intel processors.

Enhanced the thermal stability of the system by reducing the CPU temperature.

Initial Release

Initial Release