Name | Farbe | |
2 X Brick 1 x 8 | White |   | |
1 X Wedge, Plate 8 x 3 Left | White |   | |
1 X Wedge 10 x 3 Right | White |   | |
1 X Plate 6 x 10 | White |   | |
2 X Plate 2 x 8 | White |   | |
1 X Technic, Brick 1 x 2 with Hole | White |   | |
1 X Wedge 4 x 2 Right | White |   | |
2 X Window 1 x 4 x 2 Plane, Single Hole Top and Bottom for Glass | White |   | |
2 X Plate, Modified 2 x 8 with Door Rail | White |   | |
1 X Wedge 10 x 3 Left | White |   | |
1 X Wedge 4 x 4 Triple with Stud Notches | White |   | |
1 X Slope 45 2 x 2 with Radar Screen Pattern | White |   | |
3 X Brick, Round 2 x 2 with Axle Hole | White |   | |
1 X Wedge, Plate 12 x 3 Left | White |   | |
1 X Plate, Round 4 x 4 with Hole | White |   | |
2 X Plate 2 x 3 | White |   | |
1 X Wedge 4 x 3 No Studs | White |   | |
2 X Brick, Arch 1 x 8 x 2 Raised Arch | White |   | |
1 X Wedge, Plate 12 x 3 Right | White |   | |
2 X Wedge 6 x 4 Triple Curved | White |   | |
1 X Wedge 6 x 2 Left | White |   | |
1 X Wedge, Plate 3 x 6 Cut Corners | White |   | |
1 X Brick 1 x 2 | White |   | |
2 X Brick 1 x 6 | White |   | |
1 X Plate 4 x 4 | White |   | |
2 X Panel 1 x 2 x 3 with Side Supports - Hollow Studs | White |   | |
1 X Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | White |   | |
1 X Slope 45 2 x 2 with Aircraft Multiple Flight Controls Pattern | White |   | |
1 X Tail 12 x 2 x 5 | White |   | |
1 X Slope, Curved 2 x 4 x 2/3 No Studs with Bottom Tubes | White |   | |
2 X Panel 1 x 2 x 1 with Rounded Corners | White |   | |
6 X Slope, Inverted 33 3 x 1 | White |   | |
2 X Brick 2 x 10 | White |   | |
2 X Panel 1 x 4 x 2 with Side Supports - Hollow Studs | White |   | |
1 X Dish 3 x 3 Inverted (Radar) | White |   | |
3 X Slope, Curved 2 x 2 No Studs | White |   | |
1 X Plate, Modified 1 x 2 with Clip Horizontal on Side | White |   | |
1 X Wedge 4 x 2 Left | White |   | |
1 X Slope, Inverted 33 3 x 2 with Connections between Studs | White |   | |
6 X Brick 1 x 2 x 2 with Inside Stud Holder | White |   | |
1 X Wedge 6 x 2 Right | White |   | |
2 X Plate 2 x 2 | Tan |   | |
1 X Tile, Round 2 x 2 with Bottom Stud Holder | Red |   | |
2 X Slope 45 2 x 2 | Red |   | |
1 X Boat, Kayak | Red |   | |
2 X Brick, Round 2 x 2 with Axle Hole | Red |   | |
2 X Technic, Brick 1 x 6 with Holes | Red |   | |
1 X Brick, Round 2 x 2 with Flutes (Grille) and Axle Hole | Red |   | |
8 X Tile 2 x 4 | Blue |   | |
1 X Plate 6 x 12 | Blue |   | |
2 X Plate 6 x 8 | Blue |   | |
2 X Wedge, Plate 4 x 2 Right | Blue |   | |
4 X Plate 1 x 8 | Blue |   | |
1 X Hinge Brick 1 x 2 Locking with 2 Fingers Horizontal End | Blue |   | |
1 X Plate, Round Half 4 x 8 | Blue |   | |
4 X Tile, Modified 1 x 2 Grille with Bottom Groove / Lip | Blue |   | |
4 X Plate, Modified 1 x 2 with Handle on Side - Closed Ends | Blue |   | |
1 X Tile, Modified 1 x 2 with Handle | Blue |   | |
1 X Turntable 2 x 2 Plate, Base | Blue |   | |
1 X Plate 2 x 8 | Blue |   | |
1 X Plate, Modified 3 x 2 with Hole | Blue |   | |
2 X Wedge, Plate 4 x 2 Left | Blue |   | |
3 X Plate 1 x 1 | Blue |   | |
5 X Plate 1 x 6 | Blue |   | |
4 X Plate 2 x 2 Corner | Blue |   | |
2 X Brick, Modified 1 x 4 with 4 Studs on 1 Side | Blue |   | |
2 X Wedge, Plate 3 x 3 Cut Corner | Blue |   | |
2 X Tile 1 x 6 | Blue |   | |
1 X Plate 2 x 2 | Blue |   | |
1 X Plate 1 x 2 | Blue |   | |
2 X Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole | Blue |   | |
2 X Minifigure, Utensil Oar / Paddle Head | Yellow |   | |
1 X Technic, Brick 1 x 4 with Holes | Yellow |   | |
1 X Brick 1 x 2 x 3 | Yellow |   | |
3 X Plate, Modified 1 x 2 with Arm Up (Horizontal Arm Length 5mm) | Yellow |   | |
4 X Plate, Modified 1 x 2 with Handle on End - Closed Ends | Yellow |   | |
2 X Tile, Round 1 x 1 | Yellow |   | |
1 X Plate, Modified 1 x 1 with Clip Light - Thick Ring | Yellow |   | |
2 X Brick 2 x 3 | Yellow |   | |
2 X Slope, Curved 10 x 1 | Black |   | |
2 X Slope, Curved 6 x 2 | Black |   | |
1 X Plate, Round Corner 2 x 6 Double | Black |   | |
1 X Plate, Round Half 4 x 8 | Black |   | |
1 X Bar 4L (Lightsaber Blade / Wand) | Black |   | |
1 X Brick, Round 2 x 2 Dome Top - Hollow Stud with Bottom Axle Holder x Shape + Orientation | Black |   | |
2 X Tile, Modified 1 x 2 Grille with Bottom Groove / Lip | Black |   | |
2 X Plate, Modified 1 x 2 with Clips Horizontal (thick open O clips) | Black |   | |
1 X Wheel 18mm D. x 14mm with Pin Hole, Fake Bolts and Shallow Spokes | Black |   | |
1 X Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side | Black |   | |
1 X Bracket 1 x 2 - 2 x 2 Inverted | Black |   | |
1 X Slope, Curved 3 x 2 No Studs | Black |   | |
2 X Slope 18 4 x 2 | Black |   | |
1 X Bracket 5 x 2 x 1 1/3 with 2 Holes | Black |   | |
4 X Brick, Round Corner 4 x 4 Full Brick | Black |   | |
6 X Tire 14mm D. x 4mm Smooth Small Single with Number Molded on Side | Black |   | |
1 X Technic, Plate Rotor 6 Blade with Clip Ends Connected (Water Wheel) | Black |   | |
1 X Wedge, Plate 3 x 4 with Stud Notches | Black |   | |
3 X Slope, Inverted 45 6 x 1 Double with 1 x 4 Cutout | Black |   | |
2 X Brick 1 x 8 | Black |   | |
1 X String, Cord Thin 50cm | Black |   | |
3 X Brick, Modified 1 x 2 with Studs on 2 Sides | Black |   | |
1 X Tile 2 x 2 with Groove | Black |   | |
3 X Plate 1 x 2 | Black |   | |
2 X Tile 1 x 4 | Black |   | |
1 X Bar 6L with Stop Ring | Black |   | |
12 X Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole | Black |   | |
6 X Plate, Modified 2 x 16 with Angled Side Extensions and Axle Hole (Rotor Blade) | Black |   | |
1 X Propeller 3 Blade 9 Diameter with Center Recessed | Black |   | |
1 X Antenna Whip 8H | Black |   | |
6 X Slope 33 3 x 1 | Black |   | |
2 X Plate 1 x 3 | Green |   | |
3 X Brick 1 x 2 | Green |   | |
1 X Tile, Round 1 x 1 | Trans-Clear |   | |
1 X Tile 1 x 1 with Groove (3070) | Trans-Red |   | |
1 X Windscreen 5 x 8 x 2 | Trans-Light Blue |   | |
4 X Glass for Window 1 x 2 x 2 Flat Front | Trans-Light Blue |   | |
1 X Brick, Round 2 x 2 with Axle Hole | Trans-Yellow |   | |
1 X Tile 1 x 1 with Groove (3070) | Trans-Green |   | |
1 X Wedge, Plate 6 x 3 Right | Orange |   | |
2 X Slope, Inverted 33 3 x 1 | Orange |   | |
2 X Tile 1 x 4 | Orange |   | |
1 X Wedge, Plate 6 x 3 Left | Orange |   | |
3 X Brick 1 x 4 | Orange |   | |
9 X Plate 1 x 2 | Orange |   | |
2 X Wedge, Plate 3 x 2 Right | Orange |   | |
11 X Plate 1 x 4 | Orange |   | |
2 X Vehicle, Mudguard 4 x 3 x 1 with Arch Curved | Orange |   | |
2 X Wedge, Plate 3 x 2 Left | Orange |   | |
1 X Plate 2 x 8 | Orange |   | |
2 X Plate, Modified 2 x 8 with Door Rail | Orange |   | |
2 X Plate 2 x 4 | Lime |   | |
1 X Plate 2 x 4 | Light Bluish Gray |   | |
2 X Brick 1 x 1 | Light Bluish Gray |   | |
1 X Brick, Modified 1 x 2 x 1 2/3 with Studs on 1 Side | Light Bluish Gray |   | |
1 X String Reel 2 x 2 Drum | Light Bluish Gray |   | |
3 X Plate, Modified 2 x 2 Thin with Dual Wheels Holder - Split Pins | Light Bluish Gray |   | |
1 X Brick, Modified 2 x 2 with Top Pin and 1 x 2 Side Plates | Light Bluish Gray |   | |
1 X Turntable 2 x 2 Plate, Top | Light Bluish Gray |   | |
2 X Cone 1 x 1 with Top Groove | Light Bluish Gray |   | |
2 X Plate 1 x 8 | Light Bluish Gray |   | |
2 X Brick 2 x 6 | Light Bluish Gray |   | |
3 X Slope, Curved 2 x 2 No Studs | Light Bluish Gray |   | |
2 X Wheel 18mm D. x 8mm with Fake Bolts and Deep Spokes with Inner Ring | Light Bluish Gray |   | |
2 X Plate, Modified 2 x 4 with Pin Holes | Light Bluish Gray |   | |
1 X Brick 2 x 2 | Light Bluish Gray |   | |
1 X Plate 2 x 14 | Dark Bluish Gray |   | |
1 X Shark Head with Rounded Nose with Black Eyes Pattern | Dark Bluish Gray |   | |
1 X Tile, Round 2 x 2 with Open Stud | Dark Bluish Gray |   | |
2 X Slope, Curved 10 x 1 | Dark Bluish Gray |   | |
1 X Brick 2 x 3 | Dark Bluish Gray |   | |
3 X Plate 4 x 8 | Dark Bluish Gray |   | |
4 X Slope 33 3 x 1 | Dark Bluish Gray |   | |
6 X Bracket 1 x 2 - 2 x 4 | Dark Bluish Gray |   | |
2 X Tile, Modified 2 x 3 with 2 Clips (thick open O clips) | Dark Bluish Gray |   | |
1 X Hook with Towball | Dark Bluish Gray |   | |
3 X Tile 1 x 6 | Dark Bluish Gray |   | |
1 X Slope 30 1 x 2 x 2/3 with 2 Gauges and Silver Outline Pattern | Dark Bluish Gray |   | |
1 X Tile, Round 2 x 2 with Hole with Rotor Blade Pattern | Dark Bluish Gray |   | |
1 X Plate 8 x 16 | Dark Bluish Gray |   | |
2 X Slope, Inverted 33 3 x 1 | Dark Bluish Gray |   | |
1 X Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends | Dark Bluish Gray |   | |
2 X Slope 18 4 x 2 | Dark Bluish Gray |   | |
6 X Brick, Modified 2 x 4 No Studs, Curved Top | Dark Bluish Gray |   | |
2 X Plate 2 x 3 | Dark Bluish Gray |   | |
2 X Slope 30 1 x 2 x 2/3 | Dark Bluish Gray |   | |
1 X Shark Body with Gills | Dark Bluish Gray |   | |
2 X Slope 18 2 x 1 x 2/3 with 4 Slots | Dark Bluish Gray |   | |
4 X Slope, Curved 6 x 1 | Dark Bluish Gray |   | |
1 X Aircraft Fuselage Curved Forward 6 x 10 Bottom with 3 Holes | Dark Bluish Gray |   | |
1 X Minifigure, Utensil Handlebars | Dark Bluish Gray |   | |
4 X Brick 1 x 16 | Dark Bluish Gray |   | |
1 X Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath | Dark Bluish Gray |   | |
1 X Technic, Gear 12 Tooth Bevel | Tan |   | |
1 X Technic, Axle 2 Notched | Red |   | |
1 X Technic, Axle Connector 3L | Red |   | |
1 X Technic, Liftarm 1 x 2 Thick | Red |   | |
5 X Technic, Axle Pin with Friction Ridges Lengthwise | Blue |   | |
1 X Technic Bush 1/2 Smooth | Yellow |   | |
1 X Technic, Gear 12 Tooth Double Bevel | Black |   | |
2 X Technic, Axle and Pin Connector Angled #4 - 135 degrees | Black |   | |
1 X Technic, Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | Black |   | |
4 X Technic, Pin with Friction Ridges Lengthwise WITH Center Slots | Black |   | |
1 X Technic, Axle 3 with Stop | Reddish Brown |   | |
1 X Technic Bush | Light Bluish Gray |   | |
1 X Technic, Liftarm 1 x 7 Thick | Light Bluish Gray |   | |
1 X Technic, Disk 3 x 3 | Light Bluish Gray |   | |
3 X Technic, Pin without Friction Ridges Lengthwise | Light Bluish Gray |   | |
1 X Technic, Axle 4 with Stop | Dark Bluish Gray |   | |
2 X Technic Driving Ring Extension | Flat Silver |   | |
6 X Wheel 8mm D. x 6mm | Light Bluish Gray |   | |
1 X String Reel 2 x 2 Holder | Black |   | |
1 X Human Tool, Brick and Axle Separator | Orange |   | |
1 X Sticker for Set 60166 - (34093/6192831) | (Not Applicable) |   | |
1 X Shark with Gills with Black Eyes and White Pupils Pattern | Dark Bluish Gray |   | |
1 X Technic, Pin with Friction Ridges Lengthwise WITH Center Slots | Black |   | |
1 X Tire 14mm D. x 4mm Smooth Small Single with Number Molded on Side | Black |   | |
2 X Plate 1 x 1 | Blue |   | |
1 X Technic Bush | Light Bluish Gray |   | |
2 X Technic, Pin without Friction Ridges Lengthwise | Light Bluish Gray |   | |
1 X Wheel 8mm D. x 6mm | Light Bluish Gray |   | |
1 X Minifigure, Utensil Oar / Paddle Head | Yellow |   | |
1 X Technic Bush 1/2 Smooth | Yellow |   | |
1 X Tile, Round 1 x 1 | Yellow |   | |
1 X Tile, Round 1 x 1 | Trans-Clear |   | |
1 X Tile 1 x 1 with Groove (3070) | Trans-Green |   | |
1 X Tile 1 x 1 with Groove (3070) | Trans-Red |   | |
1 X Minifigure, Visor Standard | Trans-Black |   | |
1 X Minifigure, Visor Scuba Diver Mask | Trans-Light Blue |   | |
1 X Turntable 2 x 2 Plate, Base with Light Bluish Gray Turntable 2 x 2 Plate, Top (3680 / 3679) | Blue |   | |
1 X String Reel 2 x 2 Holder with Light Bluish Gray String Reel 2 x 2 Drum (2584 / 2585) | Black |   | |
6 X Wheel 8mm D. x 6mm with Black Tire 14mm D. x 4mm Smooth Small Single - New Style (4624 / 59895) | Light Bluish Gray |   | |
3 X Plate, Modified 2 x 2 Thin with Dual Wheels Holder - Split Pins with Light Bluish Gray Wheels and Black Tires (4870 / 4624 / 59895) | Light Bluish Gray |   | |
2 X Tile 1 x 4 with Tread Plate and Ring Pattern (Sticker) - Set 60166 | Orange |   | |
1 X Wedge 4 x 4 Triple with Stud Notches with Orange '06' and Coast Guard Logo Pattern (Sticker) - Set 60166 | White |   | |
1 X Tile, Round 2 x 2 with Bottom Stud Holder with Yellow Curved Arrow Double on Red Background Pattern (Sticker) | Red |   | |
2 X Brick 1 x 8 with Blue 'COAST GUARD' Pattern (Sticker) - Set 60166 | White |   | |
1 X Wedge 4 x 3 No Studs with Coast Guard Logo Pattern (Sticker) - Set 60166 | White |   | |
1 X Wedge 6 x 4 Triple Curved with Blue '05' and Grille Pattern Model Right Side (Sticker) - Set 60166 | White |   | |
1 X Wedge 6 x 4 Triple Curved with Blue '05' and Grille Pattern Model Left Side (Sticker) - Set 60166 | White |   | |
1 X Tail 12 x 2 x 5 with Coast Guard Logo and Blue and Orange Waves Pattern on Both Sides (Stickers) - Set 60166 | White |   | |
6 X Plate, Modified 2 x 16 with Angled Side Extensions and Axle Hole (Rotor Blade) with 2 Yellow Stripes Pattern (Sticker) | Black |   | |
1 X Slope, Curved 2 x 4 x 2/3 No Studs with Bottom Tubes with Blue Stripe, Black 'RESCUE', Orange Arrow and Black Lever Pattern (Sticker) - Set 60166 | White |   | |
Отзывы о наборе LEGO 60166