Make an Easy 2x4 Workbench

I designed this Easy 2x4 Workbench to organize my two new Ridgid 12 WD1280 gallon shop-vacs and six Harbor Freight hardware organizers.  It's a simple design that can be made with just 2x4s and plywood.  Watch my video then click here to get the plans!

This workbench is mobile and great for a small shop.  It can be customized to organize a variety of tools and storage bins.

The six Harbor Freight Hardware Storage Bins sit on runners.  I could probably fit another bin in there if I tightened up the space a little.

I used 3" casters from Harbor Freight that have an overall height of 3.75".  Keep in mind that using different size casters will change the overall height of the workbench.  I recommend casters with brakes to keep the workbench from moving.  Click here for a similar set of casters with 4" overall height on Amazon.

If you would like to build one too, click here to get the plans!  The plans include a materials list, measured drawings, cutting layouts, 18 photos, and 8 simple step-by-step assembly instructions.  I did my best to make it easy to build this project in one weekend.  It's a very sturdy bench and I plan to make more for my shop.

Wooden NFL Football made from a 2x4!

Every year I get a couple of opportunities to be creative with a regular 8-foot 2x4 for 2x4 contests.  I maintain a running list of ideas for when the time comes.  This time, I attempted to make a regulation-size NFL Football!  Watch my video to see how it turned out.

NFL footballs are about 11” long and 22” around the middle.  I was tempted to glue together several 11” lengths of 2x4 into a block, but I didn’t think the seam lines would look very good.  So, I decided to edge-glue the 2x4 and cut two each of 6.75”, 6.5”, 5” and 3” circles, then and stack them to make the blank.  I glued the circles together with the joint lines crossing each other for strength, and I used small dowels to keep them from slipping.

I’m a novice on the lathe, but I was able to turn the blank into something that resembles a football shape.  Softwood is difficult to turn down to a smooth surface.  This is the largest chunk of wood I’ve had on my lathe yet and it was pretty intimidating.  I turned the ends down as far as I felt safe doing so, then removed the football and sanded the points on the belt sander.  This worked well.

I wiped on some MinWax Pre-Stain Wood Conditioner and Early American stand and let it dry overnight.  I used a handsaw to cut four seam lines lengthwise on the football, then filled the seam lines with additional stain.  It took a while for the stain to dry in the Georgia humidity.

Once the stain was dry, I gave the whole football a light sanding to give it some roughness.  I cut some small pieces from the 2x4 scraps to make up the top seams and glued them on.  I think the seams are a little larger than a real football, but they still look cool.  I also had enough 2x4 leftover to make a display stand.

After a few coats of spray lacquer, the 2x4 Wood Football and stand were complete.  It actually turned out to look somewhat real to a degree.  The extra time it took to glue together the circles with alternating joints really paid off with a cool striped effect.  Due to the limited width of the 2x4 and a little too much turning on my part, my football ended up being 11” long and only about 20” around.  That’s ok though, because I’ve heard the NFL footballs can be a little deflated sometimes too.  ;-)