文森特使用控制檢測設備進行測試，液壓和氣壓密封測試，尺寸檢測，原材料檢測，工作性能及壽命測試。

Vincent counts on the most developed equipments to carry out all control and testing operations: hydraulic and pneumatic air tightness testing , dimensional control ,material control,operating and resistance testing.  

		① 材質成分控制 Material Control  光譜儀檢測，對材質進行化學元素分析。  Chemical analysis by spectrometer.
		② 金屬硬度測試 Metal Hardness Test 力學性能分析，特別是熱處理后的零件。   Mechanical property test especially after heat treatment.
		③ 三坐標檢測 XYZ Test  運用精密儀器對零部件進行檢測，保證零件尺寸、形狀和形位公差滿足圖紙要求。 XYZ test of tolerance and size exactly according to the drawing.	④ 噪音測試 Noise Test 控制噪音，環(huán)境保護。  Environment protected by reducing noise of the valve.
		⑤ 金屬壁厚測試 Metal Thickness Test  壁厚測試，確保殼體承壓滿足設計要求。 Thickness test to ensure the shell resistence.
		⑥ 涂層厚度測試 Coating Thickness Test 控制涂層厚度，保證防腐蝕性能。 Anti-errosion property made assrurance by thickness test after Epoxy painting and coating.
		⑦ 扭矩測試 Torque Test 扭矩控制以適配執(zhí)行器,延長使用壽命。 Torque control to adapt to suitable actuator enlength using life.
		⑧ 壓力測試 Hydraulic Tests 100%雙向壓力測試，保證閥門的密封性能。 Bi-direction test for every single piece of valve to make sure the sealing performance .
		⑨ 球化率測試 Rate of spheroidization 每批次鑄件球化率測試，不低于四級。 Test the rate of spheroidization every batch, less than level four.
		非金屬硬度測試 Rubber & PTFE & TPEE etc Hardness Test 密封件硬度測試，確保零泄漏。 Hardness test for sealing part to zero leakage.