KevsRobots Learning Platform

Wall Drawing Robot Tutorial

45% Percent Complete

Introduction

Introduction to the Wall Drawing Robot

Build the Robot

Programming

Summary

Summary and Next Steps

Setting Up the Raspberry Pi

Instructions to set up and configure the Raspberry Pi.

By Kevin McAleer, 1 Minute

Page last updated August 02, 2024

Setup Pi

Setting Up the Raspberry Pi

Setup the Pi for the Scrawly Wally robot:

Item	Action
Install Raspberry Pi OS Download and install the latest version of Raspberry Pi OS on a microSD card. Insert the microSD card into the Raspberry Pi and boot it up. Connect to WiFi: Follow the on-screen instructions to connect your Raspberry Pi to your WiFi network. Update the System: Open a terminal and run: `sudo apt-get update && sudo apt-get upgrade` Enable I2C, SPI, and Serial Interfaces: Run `sudo raspi-config` and enable the necessary interfaces.

Your Raspberry Pi is now set up. Next, we’ll install the software needed for the robot.

< Previous Next >

You can use the arrows ← → on your keyboard to navigate between lessons.