hand sewing hexagons - part 2 {quilting basics tutorial series}

hand sewing hexagons tutorial! {part 2}
{see part 1 for info on templates & basting}
{see part 3 for info on removing the plastic quilt patis and one finishing option}


--
personal note...
I meant to have this done & posted hours ago.. but I discovered http://www.ancestry.com/ and I'm addicted. Between last night and this morning I've spent 10+ hours on the site and digging through books and papers in the house.   I traced one part of my family 11 generations up from me back to 1614!!
--


Below are step by step directions for sewing hexagons together.  This tutorial will continue in step #3 with finishing directions.

{Directions are written for right handed people... if you sew left handed you'll have to reverse a a few steps.}

fabrics used in most tutorial photos are...

Mon Sheri by Khristian A. Howell {available in october}

from robert kaufman

1. After following the directions in part 1 you'll have a pile of hexagons.

2. You can sew them together to make a flower... or in a random arrangement.  The process for attaching them is the same.  Start by threading your hand sewing needle with no more than 18" of thread.

3. Select with two hexagons.

4. Pick them up...

5.  Fold one on top of the other along the side you want to sew together.

6. Until they are like this...

7. Turn the two hexagons so that the side you want to sew together is facing up.

8. Take your threaded needle in your right hand.

9. Begin sewing at the right corner and take very small stitches {or bites} out of the fabric.

10. Continue moving right to left along the seam.

11. At the end of the seam take an extra stitch to secure the seam.

12. This will be your result.

13. Choose the next hexagon to attach.  I suggest choosing one that can be attached to a seam where your thread is already attached to the pieces you just put together.

14.  Just like in step 9 take small stitches and begin to sew this seam.

15. When you reach the end, like in step 11, take an extra stitch to secure the seam.

16. This is the result.  Instead of sewing the open seam at the top I suggest again choosing to add another hexagon where your thread is already attached to the pieces you just put together.  {This is personal preference... no single way is right or wrong.}

17. The next hexagon to add.

18. Folded onto of the unit.

19. Beginning to sew it in place.  {Again like step 9}

{another angle}

20. Eventually you'll come to a point where your thread is not in a location where you need to add another piece.  You could tie a knot and start over, but if you still have a good amount of thread left there is another option.  Place your needle into the seam allowance near the corner your thread is at and take one long running stitch to the closest intersection that has an open seam.

21. Pull the needle out at that intersection.

22. Think of the hexagon intersections as a Y shape.  The first two seams are easier as you can put the hexagons together back to back.  {See step 8 Photo}  Sewing the last seam isn't hard... just a bit tricky to get used to.  Hold the hexagons together with your left hand and take tiny stitches with your right.

23. The plastic templates don't bend as easily as the paper ones but I still prefer to use them for their overall benefits.  Continue sewing along until you finish all the seams.

A finished flower!

the back

If you are making a larger piece you can remove the hexagon templates once all six sides have another hexagon sewn to them.  {As shown in the bottom right of this photo.}

In part 3 I'll show you finishing directions!

happy stitching!!

--

want to link to this tutorial?

grab a button!

{144 x 144}

{250x250}

enjoy!!

© 2009-2022 Julie R. Herman. All rights reserved.

No part of this tutorial may be reproduced without written consent of Jaybird Quilts.