Apache Tomcat

This document describes how to configure your Google Kubernetes Engine deployment so that you can use Google Cloud Managed Service for Prometheus to collect metrics from Apache Tomcat. This document shows you how to do the following:

  • Set up the exporter for Tomcat to report metrics.
  • Configure a PodMonitoring resource for Managed Service for Prometheus to collect the exported metrics.
  • Access a dashboard in Cloud Monitoring to view the metrics.
  • Configure alerting rules to monitor the metrics.

These instructions apply only if you are using managed collection with Managed Service for Prometheus. If you are using self-deployed collection, then see the source repository for the JMX exporter for installation information.

These instructions are provided as an example and are expected to work in most Kubernetes environments. If you are having trouble installing an application or exporter due to restrictive security or organizational policies, then we recommend you consult open-source documentation for support.

For information about Tomcat, see Apache Tomcat.

Prerequisites

To collect metrics from Tomcat by using Managed Service for Prometheus and managed collection, your deployment must meet the following requirements:

  • Your cluster must be running Google Kubernetes Engine version 1.21.4-gke.300 or later.
  • You must be running Managed Service for Prometheus with managed collection enabled. For more information, see Get started with managed collection.

  • To use dashboards available in Cloud Monitoring for the Tomcat integration, you must use jmx-exporter version 0.17.0 or later.

    For more information about available dashboards, see View dashboards.

Tomcat supports JMX, which can be enabled by configuring the CATALINA_OPTS environment variable.

Install the Tomcat exporter

We recommend that you install the Tomcat exporter, jmx-exporter, as a sidecar to your Tomcat workload. For information about using sidecars, see Extended applications on Kubernetes with multi-container pods.

To install jmx-exporter as a sidecar to Tomcat, modify your Tomcat configuration as shown in the following example:

# Copyright 2023 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
apiVersion: v1
kind: ConfigMap
metadata:
  name: tomcat-exporter
data:
  config.yml: |
    hostPort: 127.0.0.1:9010
    lowercaseOutputLabelNames: true
    lowercaseOutputName: true
    rules:
    - pattern: 'Catalina<type=GlobalRequestProcessor, name=\"(\w+-\w+)-(\d+)\"><>(\w+):'
      name: tomcat_$3_total
      labels:
        port: "$2"
        protocol: "$1"
      help: Tomcat global $3
      type: COUNTER
    - pattern: 'Catalina<j2eeType=Servlet, WebModule=//([-a-zA-Z0-9+&@#/%?=~_|!:.,;]*[-a-zA-Z0-9+&@#/%=~_|]), name=([-a-zA-Z0-9+/$%~_-|!.]*), J2EEApplication=none, J2EEServer=none><>(requestCount|maxTime|processingTime|errorCount):'
      name: tomcat_servlet_$3_total
      labels:
        module: "$1"
        servlet: "$2"
      help: Tomcat servlet $3 total
      type: COUNTER
    - pattern: 'Catalina<type=ThreadPool, name="(\w+-\w+)-(\d+)"><>(currentThreadCount|currentThreadsBusy|keepAliveCount|pollerThreadCount|connectionCount):'
      name: tomcat_threadpool_$3
      labels:
        port: "$2"
        protocol: "$1"
      help: Tomcat threadpool $3
      type: GAUGE
    - pattern: 'Catalina<type=Manager, host=([-a-zA-Z0-9+&@#/%?=~_|!:.,;]*[-a-zA-Z0-9+&@#/%=~_|]), context=([-a-zA-Z0-9+/$%~_-|!.]*)><>(processingTime|sessionCounter|rejectedSessions|expiredSessions):'
      name: tomcat_session_$3_total
      labels:
        context: "$2"
        host: "$1"
      help: Tomcat session $3 total
      type: COUNTER
---
apiVersion: apps/v1
kind: Deployment
metadata:
  name: tomcat
spec:
  selector:
    matchLabels:
+     app.kubernetes.io/name: tomcat
  template:
    metadata:
      labels:
+       app.kubernetes.io/name: tomcat
    spec:
      containers:
        - name: tomcat
          image: tomcat:9.0.46-jdk11-openjdk-buster
          ports:
            - containerPort: 8080
              name: http
          env:
+           - name: CATALINA_OPTS
+             value: "-Dcom.sun.management.jmxremote.local.only=false -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.port=9010 -Dcom.sun.management.jmxremote.rmi.port=9010"
+       - name: exporter
+         image: bitnami/jmx-exporter:0.17.0
+         ports:
+           - containerPort: 9113
+             name: prometheus
+         command:
+           - java
+           - -jar
+           - jmx_prometheus_httpserver.jar
+         args:
+           - "9113"
+           - /opt/jmx_exporter/config.yml
+         volumeMounts:
+           - mountPath: /opt/jmx_exporter/config.yml
+             subPath: config.yml
+             name: tomcat-exporter
+     volumes:
+       - name: tomcat-exporter
+         configMap:
+           name: tomcat-exporter
+           items:
+             - key: config.yml
+               path: config.yml

You must add any lines preceded by the + symbol to your configuration.

To apply configuration changes from a local file, run the following command:

kubectl apply -n NAMESPACE_NAME -f FILE_NAME

You can also use Terraform to manage your configurations.

Define a PodMonitoring resource

For target discovery, the Managed Service for Prometheus Operator requires a PodMonitoring resource that corresponds to the Tomcat exporter in the same namespace.

You can use the following PodMonitoring configuration:

# Copyright 2023 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

apiVersion: monitoring.googleapis.com/v1
kind: PodMonitoring
metadata:
  name: tomcat
  labels:
    app.kubernetes.io/name: tomcat
    app.kubernetes.io/part-of: google-cloud-managed-prometheus
spec:
  endpoints:
  - port: prometheus
    scheme: http
    interval: 30s
    path: /metrics
  selector:
    matchLabels:
      app.kubernetes.io/name: tomcat

Ensure that the label selectors and the port match the selectors and port used in Install the Tomcat exporter.

To apply configuration changes from a local file, run the following command:

kubectl apply -n NAMESPACE_NAME -f FILE_NAME

You can also use Terraform to manage your configurations.

Define rules and alerts

You can use the following Rules configuration to define alerts on your Tomcat metrics:

# Copyright 2023 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

apiVersion: monitoring.googleapis.com/v1
kind: Rules
metadata:
  name: tomcat-rules
  labels:
    app.kubernetes.io/component: rules
    app.kubernetes.io/name: tomcat-rules
    app.kubernetes.io/part-of: google-cloud-managed-prometheus
spec:
  groups:
  - name: tomcat
    interval: 30s
    rules:
    - alert: TomcatHighRequestRate
      annotations:
        description: |-
          Tomcat high request rate
            VALUE = {{ $value }}
            LABELS: {{ $labels }}
        summary: Tomcat high request rate (instance {{ $labels.instance }})
      expr: rate(tomcat_requestcount_total[5m]) >= 100
      for: 5m
      labels:
        severity: warning
    - alert: TomcatLowRequestRate
      annotations:
        description: |-
          Tomcat low request rate
            VALUE = {{ $value }}
            LABELS: {{ $labels }}
        summary: Tomcat low request rate (instance {{ $labels.instance }})
      expr: rate(tomcat_requestcount_total[5m]) <= 10
      for: 5m
      labels:
        severity: warning
    - alert: TomcatHighErrorRate
      annotations:
        description: |-
          Tomcat high error rate
            VALUE = {{ $value }}
            LABELS: {{ $labels }}
        summary: Tomcat high error rate (instance {{ $labels.instance }})
      expr: rate(tomcat_errorcount_total[5m]) > 100
      for: 5m
      labels:
        severity: warning

To apply configuration changes from a local file, run the following command:

kubectl apply -n NAMESPACE_NAME -f FILE_NAME

You can also use Terraform to manage your configurations.

For more information about applying rules to your cluster, see Managed rule evaluation and alerting.

You can adjust the alert thresholds to suit your application.

Verify the configuration

You can use Metrics Explorer to verify that you correctly configured the Tomcat exporter. It might take one or two minutes for Cloud Monitoring to ingest your metrics.

To verify the metrics are ingested, do the following:

  1. In the Google Cloud console, go to the  Metrics explorer page:

    Go to Metrics explorer

    If you use the search bar to find this page, then select the result whose subheading is Monitoring.

  2. In the toolbar of the query-builder pane, select the button whose name is either  MQL or  PromQL.
  3. Verify that PromQL is selected in the Language toggle. The language toggle is in the same toolbar that lets you format your query.
  4. Enter and run the following query:
    up{job="tomcat", cluster="CLUSTER_NAME", namespace="NAMESPACE_NAME"}

View dashboards

The Cloud Monitoring integration includes the Tomcat Prometheus Overview dashboard. Dashboards are automatically installed when you configure the integration. You can also view static previews of dashboards without installing the integration.

To view an installed dashboard, do the following:

  1. In the Google Cloud console, go to the  Dashboards page:

    Go to Dashboards

    If you use the search bar to find this page, then select the result whose subheading is Monitoring.

  2. Select the Dashboard List tab.
  3. Choose the Integrations category.
  4. Click the name of the dashboard, for example, Tomcat Prometheus Overview.

To view a static preview of the dashboard, do the following:

  1. In the Google Cloud console, go to the  Integrations page:

    Go to Integrations

    If you use the search bar to find this page, then select the result whose subheading is Monitoring.

  2. Click the Kubernetes Engine deployment-platform filter.
  3. Locate the Apache Tomcat integration and click View Details.
  4. Select the Dashboards tab.

Troubleshooting

For information about troubleshooting metric ingestion problems, see Problems with collection from exporters in Troubleshooting ingestion-side problems.