Linear Slide Actuator | Electric Linear motion control system | Tomuu

Linear Actuators & Electric Motion Control Products Manufacturer

Electric Linear Motion Control, Linear Slide Actuator

  1. Home
  2. Discontinued
  3. Linear Actuators U5C

Linear Actuators U5C

Linear Slide Actuator
Linear Slide Actuator Linear Slide Actuator Linear Slide Actuator

The U5C model linear slide actuator is an updated version of the U5 mode linear actuator, and is specially designed for use in electric sofas, massage chairs, electric beds and other smart furniture. The only difference between the U5C model linear slide actuator and the U5 mode linear actuator is that the gear box is equipped with plug of female 5 pins for manual controllers. The circuit board is installed in the gear box, which allows the linear controller to be easy to install and control.

Appearance and size
Appearance and size
Curve graph
Appearance and size Appearance and size

① Load VS Curent; ② Current (A); ③ Load (N); ④ Load VS Speed; ⑤ Speed (mm/s)

Code of Parameters
code Rated laod（N） Rated current（A） Rated speed（mm/s）
Push Pull No-load(32VDC) Full-load(24VDC)
Standard motor (2600RPM)
A 6000 3000 5 5.4 2.9
B 5000 3000 5 7.1 3.9
C 3000 3000 4.5 11 6.2
D 2500 2500 4 15.8 7.8
E 2000 2000 5 22.5 13
F 1200 1200 4 33 19
G 700 700 4.5 44.5 23.6
High Speed Motor(3400RPM)
H 6000 3000 5 6.7 3.9
I 5000 3000 5 7.6 4.6
J 3000 3000 4.8 10.1 8.2
K 2500 2500 4.5 15.1 11
L 2000 2000 4.5 20.2 16
M 1200 1200 5 27.1 23
N 700 700 4.5 39.5 30

Comment: when the voltage changes from 24V to 12V, the current will be doubled.

Customization parameter

  • voltage

    1=12V
    2=24V(standard)

  • Type of Cable

    1=straight
    2=coiled

  • Front-end

    1=NO
    2=L type dead plate
    C=customization

  • Rear-end

    1=Plastic clevis, slot 6.2mm, hole Φ10.2mm
    C=customization

  • Connector

    1=Tined leads
    2= 01 Pin
    3=Din 4 pin, 90°
    4=Din 5 pin, 90°
    5=Din 6 pin, 90°
    C=customization

  • limit switch

    1=Switches in both end off to stop
    2=Switches in both end off to output signal
    3=Switches in both end off to stop and a third one off to output signal
    4=Switches in both end and a third one off to output signal
    C=customization

  • Signal feedback

    1=no
    2=single Hall sensor
    3=Dual Hall sensor
    4=reed sensor

  • Brake

    1=no
    3=torsional spring of 4.5 coil
    2=torsional spring of 3 coil
    4=motor brake

  • Length of Cable

    1=0.5m
    2=1m
    3=1m
    4=2m
    5=3m
    C=customization
Other linear actuator

Our motion control products are used in many industries, and for these various industries there are different requirements regarding the motion control system. To meet the requirements, we set 9 parameters in the customization of the electric actuators. We will produce the individual motion control products according to your defined parameters. In the customization process, we have professional staff members who will contact you. All you need to provide is the simplest answer of what you need, and we will get to work creating the most suitable design and will send out a sample as quickly as possible. Even if you don’t have a clear plan for your product, you can contact us and we will provide professional consultation.