Product Description
View Data Sheet | |
View White Paper – Tortoise Multi-Band Transmitter | |
View White Paper – LTE Propagation Studies | |
View User Manual | |
5G Build Outs Start Here |
Tortoise Multi-Band Transmitter is a portable, rugged, high-power transmitter system comprised of dual, independent modules giving the user freedom to transmit on any 2 unique frequency bands simultaneously without the need for expensive and bulky additional transmitters. Tortoise features two dynamically controlled Class AB amplifiers for the cleanest signal output and VSWR protection. Tortoise can support C-band, CBRS, 3.5 GHz and most other 3G/4G/5G (non-mm wave frequencies) RF spectrum.
Tortoise features built-in thermal overheat protection circuitry with quad cooling fans to ensure against overheating during operation. Remote adjustments include power level, channel or frequency assignment and transmit On/Off via USB connected to any PC. Tortoise simulates CW signals complete with adjustable step sizes, channel bandwidth and user settable ID Cell, Segment and frame lengths.
Features:
- CW module combos include 3G/4G/5G (non-mm wave frequencies) for CBRS, CDMA, Cellular, PCS, Paging, ETACS, iDEN, SMR, ISM, LMR, UMTS, GSM, LTE, WiMAX, Wi-Fi, AWS & more
- From 170 MHz all the way up 3700 MHz (power ranges vary among RF bands)
- Two independent transmitter module bays for single, dual and wide band configurations
- Power amplifier with continuous adjustable power output ± 0.1 dB over 17 dB range
- Water resistant, rugged 18″ x 15″ x 6″ ABS plastic case
- Microprocessor-controlled 640 x 240 LCD with front panel soft-keys or remotely controlled with an internal modem for user programmable modulation schemes, power levels, channels, and frequencies.
- Calibration/Usage integrated hours meter
- VSWR antenna protection and internal forward and reverse measurement
- Quad cooling fans with built-in thermal overheat protection for amplifier
- Weighs under 20 pounds
- Powered from 110-240 VAC 50-60 Hz
- All parameters can be adjusted remotely via USB connection to any PC
- Designed and manufactured entirely in the USA
Technical Specifications:
TORTOISE SINGLE BAND: 170 – 220 MHz 25 Watts 400 – 500 MHz 25 Watts 690 – 960 MHz 25 or 50 Watts 1700 – 2200 MHz 25 Watts 3400 – 3700 MHz 10 or 20 Watts
TORTOISE WIDE SINGLE BAND: 540 – 2500 MHz 25 Watts 690 – 2700 MHz 25 Watts |
TORTOISE DUAL BAND: 170 – 220 MHz 25 Watts 400 – 500 MHz 25 Watts 690 – 960 MHz 25 or 50 Watts 1800 – 2200 MHz 25 Watts 3400 – 3700 MHz 10 or 20 Watts
TORTOISE WIDE DUAL BAND: 540 – 2500 MHz 25 Watts 690 – 2700 MHz 25 Watts |
Selectable step sizes of 2.5 kHz, 5 kHz, 15 kHz, 20 kHz, 25 kHz, 50 kHz and 200 kHz. Custom frequency bands available upon request | |
OUTPUT POWER | |
-78 dBc/Hz @ 10 kHz offset | |
NOISE TYPICAL AT 2 GHZ | -105 dBc/Hz @ 100 kHz offset |
Control via USB connected to any PC | |
SPURIOUS OUTPUT | > 50 dBc |
HARMONICS OUTPUT | > 25 dBc |
-20 degrees C to 35 degrees C | |
POWER | Internal power supply 100-240 VDC, 5 Amp |
INCLUDES | 2 Antennae output ports (Type N female) and PC software |
OPTIONS | Pure sine wave power inverter 600 watts 12 VDC to 120 VAC power |