Faux Hoop - Spider Web Decor

Halloween Faux Embroidery Hoop Tutorial

Altered embroidery hoops are EVERYWHERE these days, and though they only cost a few dollars to purchase from the local craft store I got the urge to make one at 3 am. Someday, when I'm rich I think I will build a crafstore which is only open when children are sleeping - that way all the night owl crafters like myself will have somewhere to shop and meet their late night craft urges.

So there I was, a girl wanting to alter an embroidery hoop with no hoop supplier in sight - what was I to do? Pull out some chipboard scraps of course and get to the making do we crafters are so good at.

Faux Embroidery Hoop Tutorial

1. Cut 4 strips of light weight chipboard and 4 strips of coordinating patterned paper with your paper cutter - dimensions 12 x 1 inches.

2. Using something uber strong and stickalicous ( I went with Beacon Adhesives Zip Dry) glue two of the strips together, overlapping 1/4 inch - repeat this step again to create an oval. For maximum cuteness be sure the overlapped ends are on the inside. Allow this hoop to completely dry - use binder clips if you need to maintain the oval shape and keep the ends together.

3. Adhere two of your patterned paper strips to the inside of your hoop with Zip Dry (Mod Podge would also work).

4. Using the Happy Hauntings Cricut Cartridge, cut the web from the "3DSpider" cut with the Layer 2 function selected at 8 inches from light weight white cardstock.

5. Glue the web strands to the outside of the inner hoop one at a time, going around the hoop in clockwise direction. Use a super strong adhesive again for this step.

6. Attach your remaining two chipboard strips together, but only on one end. Use Zip Dry to wrap and adhere this chipboard strip around the hoop with spider web.  The ends will once again overlap about 1/4 inch and this is okay.

7. Cover the exterior hoop with patterned paper and then cover the patterned paper with a pleated trim and lace edging. I used Zip Dry for all these layers.

8. Snip off any visible spider web edges that extend past the chipboard hoops.

9. Coat the entire front edges (the edge you see when looking at the hoop as it hangs on the wall) with black Pearl Pen. This really adds depth and dimension and gives the hoop its faux hoopiness.

10. Apply Ranger Stickles in Diamond to the inner and outer edges of the spiderweb.

11. Add your spider - mine is create from a fabric covered buttons, a sparkly button,  the ends of a black floral pick, and two regular buttons layered underneath to give it some height. A plastic spider would work equally well.

12. Add an organza black bow at the top and your wall is ready to be spookified!.

Pin It


Thanks for playing a little hoops with me,

CarrieAnne



Recipe:
Cricut Cartridge: Happy Hauntings
Cardstock: Couture Cardstock
Patterned Paper: Pink Paislee
Adhesive: Beacon Adhesives: Zip Dry
Tools: Imaginisce: I-Top
Chipboard: Couture Cardstock
Pearl Pen: Viva Decor
Buttons, Floral Pick: Stash
Ribbon: Making Memories, May Arts

Cuts:
From the Happy Hauntings Cricut Cartridge, cut the web from the "3DSpider" cut with the Layer 2 function selected at 8 inches from light weight white cardstock.

February My Pink Stamper Design Team Project

Today is the day we get to post the projects we made for February with Robyn's new stamp releases over at My Pink Stamper. I had the opportunity to work with Sweetest Cupcakes.

The set contains 25 expressions all about cupcakes, baking, sweetness, love and yummy food.

I have had this idea about making an oven gift box in my head for a while, but I wanted to make it super easy so I could do multiples to send a little something sweet to folks from church or friends who are under the weather. Let me tell you this box could not be easier and the how to's are below. I fit a few mini muffins or small chocolate chip cookies in mine. I made the mixer card to match with a little yummy frosting spilling over the edge just like what happens in my own kitchen.

Don't forget to leave a comment if you haven't already to win the 2 bottles of Viva Decor Paper Soft I am giving away. I am picking the winner on Friday.


Thanks for stopping by,

CarrieAnne


RECIPE:

Stamp Set: My Pink Stamper: Sweetest Cupcakes ("Baking Up Some Love" and "I'm Sweet on You" Sentiments)

Cricut Cartridges: Bags, Tags, Boxes and More, From My Kitchen
Embossing Folder: Cuttlebug: Swiss Dots

Ink: Stampin' UP!: Wild Wasabi
Patterned Paper: Imaginisce, GCD Studios
Filigree Metal Flowers (Burners on the stove): Nunn Designs
Dimensional Paint (Chocolate on Mixer Bowl): Viva Decor
Transparency (See through front on oven): Staples
Small cherry punch and 1/16 hole punch: Marvy Uchida
Brads and Half back Pearl: Misc

The How To's on the Oven Box

Stove Knob Back Panel

1. The only part of the box from From My Kitchen is the knob section (the back panel above the burners) so you could certainly whip up an alternate option if you didn't have this cartridge. This panel comes from the main oven cut on page 30. Cut it out on blue cardstock at 3 inches.

2. Then using the existing upper cut line for the stove door as a guide, remove the bottom portion of the stove front.

3. Using the "layers" function cut out the two white strips and adhere them to the knob panel.

4. Using a 1/16 hole punch pierce the center of each of the 4 marked "knobs".

5. Insert your favorite brads in the holes to act as knobs.

6. Set aside this stove panel momentarily.

Oven Box

1. With the "Fit to Length" option selected and the "Window" function on cut out two of the square boxes found on page 119 at 11 1/4 inches from the Bags, Tags, Boxes and More cartridge. You will need one in light blue cardstock and one in white cardstock.

2. Fold the blue boxe in half and dry emboss it with your Swiss Dots Cuttlebug embossing folder.

3. Score on all of the fold lines with a scorer or bone folder. This is an important step if you want a balanced and stable box. Hand folding without scoring can make it wonky!

4. Adhere a small square of clear transparency to the inside of the box behind the cut out square.

It is important to do all your embellishing before you assemble the box. With this in mind we are now going to add the details.

5. Use your paper cutter to remove the panel on the white cube box with the window section. Stamp "I'm Sweet on You" on the lower part of this section. Punch cherry out and adhere next to sentiment. Adhere white window panel over the blue window section of the blue cube box.

6. Use scraps from the white cube box to add the handles on the front and side of the oven. I used glue dots and then bent the strips of paper for dimension with my fingers.

7. Cut a small scrap of patterned paper and fold it in half over the side oven handle. Adhere ends of the patterned paper with one glue dot. Snip a tiny fringe if desired. This is now a dish towel embellishment.

8. Using scraps of cardstock create the layered stove top - white, then blue, then white cardstock squares. I made mine fit just inside of each other and I dry embossed my blue layer with the Swiss Dots embossing folder.

9. Add your stove burners with a glue dot. I used filigree metal flowers from Nunn Designs, but you could use stamped flowers, circles, epoxy stickers, buttons, or round paper clips.

10. Assemble your box and add glue dots where needed to keep flaps together.

11. Slide in the "knob panel" into the top opening of the box. Adhere with glue dots.

You are DONE!!!

Love is in the Air

I love this post-Christmas, pre-Valentines Day time of wintery crafts, snowy days and crisp air. I thought I would take the opportunity to make a wintery all purpose card.

I used the following Cricut Cartridges:

Snow Globe from Doodle Charms
Girl from Winter Frolic
Lace Doily (makes the scalloped border) from Cindy Loo

I like to personalize the cuts offered on my Cricut so on the Girl you will notice I added fringed bangs and changed the ornament in her hand to a mini "love" card. The little girl also has eyes made from a heart cut in half with a tiny circle placed on each eye (I thought these were a bit cuter than the original eye cuts). I added a heart to her Peter Pan Collar, an extra row of ruffles around her coat bottom, and cuffs to her gloves and boots. These cuffs were further embellished with dimensional paint from Viva Decor. She also got a cute pair of earrings to style her up.

The snow globe background is dry embossed with the Cuttlebug snowflakes folder and the patterned paper is from My Mind's Eye. The rub-on, eyelets, and buttons were from my stash.

Thanks for looking,

CarrieAnne