A few photos of my first cigar box guitar. For cigar boxes both Hyde Park Cigars (the place on 53rd and Harper) and Binny's have them, although the latter's supply is variable. The neck is 1x2 poplar from home depot. I bought the tuning pegs for about $10 from C.B Gitty and the strings online. The saddle is a hard drive spindle top as are the coverings on the sound holes. The bridge and neck are just pieces of the cigar box. There is a piezo pickup inside.
So, the errors made in this build were: the holes drilled for the tuning pegs need to be aligned better. I drilled 1/4" holes with a forstner bit; these fit the pegs perfectly but not the little bushings-and the next biggest size was too big, leaving the lowest tuner a little bent. The neck doesn't hold the strings--I made a notch for each string but the highest string is too loose in the notch. The cigar box wood is too light for this. I cut out the cigar box to fit the neck but forgot about the box top so the box can interfere with fretting. I think a fret board might help. I wired the piezo backwards but no apparent harm; I'd like to experiment with positioning and how to attach them.
I can't play, but it was easy, fun, and now I've got a cigar box guitar! I can't wait to improve upon it with another one.
Wednesday, February 08, 2012
First Cigar Box Guitar build
A few photos of my first cigar box guitar. For cigar boxes both Hyde Park Cigars (the place on 53rd and Harper) and Binny's have them, although the latter's supply is variable. The neck is 1x2 poplar from home depot. I bought the tuning pegs for about $10 from C.B Gitty and the strings online. The saddle is a hard drive spindle top as are the coverings on the sound holes. The bridge and neck are just pieces of the cigar box. There is a piezo pickup inside.
So, the errors made in this build were: the holes drilled for the tuning pegs need to be aligned better. I drilled 1/4" holes with a forstner bit; these fit the pegs perfectly but not the little bushings-and the next biggest size was too big, leaving the lowest tuner a little bent. The neck doesn't hold the strings--I made a notch for each string but the highest string is too loose in the notch. The cigar box wood is too light for this. I cut out the cigar box to fit the neck but forgot about the box top so the box can interfere with fretting. I think a fret board might help. I wired the piezo backwards but no apparent harm; I'd like to experiment with positioning and how to attach them.
I can't play, but it was easy, fun, and now I've got a cigar box guitar! I can't wait to improve upon it with another one.
Subscribe to:
Post Comments (Atom)
2 comments:
Nice clean build Dean.
When I make tuner holes I first drill through with a 1/8" drill bit and then use the proper size forstner bits for the tuner and the bushing, drilling halfway through with each.
To get the right string angle/tension over the nut you can make a string tree.
All the info you need and more can be found at the Handmade Music Clubhouse http://HandmadeMusicClubhouse.com
Thanks Ted! I don't have a forstner bit of the right size for bushing but I realize I don't need a perfect hole for it since the bushing hides it.
Post a Comment