Faux Leather Crafts: Mini Covered Notebook Tutorial

Make a mini notebook with a vegan leather cover to keep it protected in your bag or pocket!

These little notebooks are simple to make, and you can easily remove and reuse the leather cover once the notebook is full.

This tutorial is the last in the series of synthetic leather crafting ideas I've been sharing this week. It originally appeared on the Village Haberdashery's blog and was created using synthetic leather and other craft supplies from their shop. (Here are the other tutorials I've shared this week: a lightning bolt brooch, a geometric necklace & a star headband). 

You will need:

- The notebook and notebook cover templates (follow the links to view and download the PDF template sheets).
- Some synthetic leather
- Coloured card
- Plain or scrap paper
- Sewing thread to match the card
- 90 cm yarn in a co-ordinating or contrasting colour (or embroidery thread or narrow ribbon)
- A standard sewing needle and a large, sharp sewing needle for the yarn
- Sewing scissors
- Scissors for cutting paper and card
- A ruler
- An air-erasable fabric marker pen or an ordinary felt tip pen

To make the notebook: 

Use the card cover template to cut a piece of blank card, then fold it in half. Then use the page template to cut eight pages from plain or scrap paper and fold these in half as well.

Use a large, sharp needle to poke three holes in the fold of the card, measuring their position with a ruler. Make one hole right in the centre of the fold then one above and one below it, each 3cm from the central hole. Then poke holes in the pieces of paper (two sheets at a time) in the same positions as on the cover.

Line up the pages and the card cover, and sew them together using a double thickness of sewing thread to match the card. I started in the central hole of the card cover, leaving a length of spare thread hanging loose then returned to the centre after stitching the pages and card together, knotting the two ends of thread together securely then trimming away the excess.

Use the leather cover template to cut out a piece of the synthetic leather. Place the paper template on the back of the leather, trace around it with an air-erasable fabric marker pen or a felt tip then cut out the shape with sewing scissors.

Wrap the cover around the notebook until you’re happy with it, then unfold it and open the notebook to the first page. Use the holes in the card as a guide to pierce three matching holes through the leather.

Cut a 90 cm piece of yarn (or embroidery thread or narrow ribbon). Use the large needle to thread the yarn through the two outer holes as shown, threading it through the leather and the card of the notebook. Pull the yarn through the holes so there is an even length of yarn at each side.

Thread both ends through the central hole, pulling the yarn tight. Knot the yarn to secure the notebook and leather cover together.

Close the notebook and leather cover as shown, wrapping the yarn around it and tying a bow to secure it.

This tutorial is for non commercial use only: you can use it to make as many notebooks as you want for yourself or as gifts, but please don't make any for sale. You may borrow a couple of photos if you want to blog about this project, but remember to credit me and link back to this page on my blog, and do not reproduce my entire tutorial / share my templates on your site. Thanks!

Enjoyed this free tutorial? Buy me a "coffee" and help support my blog!


P.S. Subscribe to my newsletter for a monthly free pattern and visit my crafty tutorial archive for lots more free projects.

Visit my shop to buy my printable PDF sewing patterns:

Faux Leather Crafts: Geometric Necklace Tutorial

The third tutorial in my mini "crafting with vegan leather is awesome" series is... a geometric necklace!

Use a chain from an old necklace, or a length of ribbon, to make a bold geometric necklace. Use the templates provided or get creative and draw your own design! You could also make this necklace from felt instead of faux leather.

This tutorial originally appeared on the Village Haberdashery's blog and was created using synthetic leather and other craft supplies from their shop.

You will need:

- The necklace templates (follow the link to view and download the PDF template sheet)
- Some synthetic leather
- Matching felt and sewing thread
- A necklace chain or length of ribbon
- A sewing needle
- Sewing scissors
- An air-erasable fabric marker pen or an ordinary felt tip pen

To make the necklace:

Use the templates provided to cut out pieces A to F from the synthetic leather. Place the paper templates on the back of the leather, trace around them using an air-erasable fabric marker or a felt tip pen then cut out the shape using sewing scissors.

Sew the pieces together using whip stitch and matching sewing thread (I used blue thread throughout). Start with the smallest pieces, sewing piece A to piece B then piece B to piece C and so on, so you’re only stitching through two layers of the leather at a time.

Once you’ve sewn all the pieces together, use the leather shape as a template to cut out a matching piece of felt for the back of the necklace.

Place the felt and leather together then use sewing thread (in the same colour as before) to sew along the top edge, joining the layers together. Place the middle of your necklace chain (or ribbon) between the two layers, so it will be held in place when you sew around the rest of the necklace shape. Make sure there are even lengths of chain (or ribbon) sticking out from each side of the necklace.

Blanket stitch around the rest of the necklace – making sure you don’t let the chain or ribbon slip out as you sew.

P.S. here are the other tutorials in this series: a faux leather star headband tutorial, a faux leather lightning bolt necklace tutorial, and a tutorial for making a mini notebook with a reusable faux leather cover.


This tutorial is for non commercial use only: you can use it to make as many necklaces as you want for yourself or as gifts, but please don't make any for sale. You may borrow a couple of photos if you want to blog about this project, but remember to credit me and link back to this page on my blog, and do not reproduce my entire tutorial / share my templates on your site. Thanks!

Enjoyed this free tutorial? Buy me a "coffee" and help support my blog!


P.S. Subscribe to my newsletter for a monthly free pattern and visit my crafty tutorial archive for lots more free projects.

Visit my shop to buy my printable PDF sewing patterns:

Faux Leather Crafts: Star Headband Tutorial

Today's vegan leather craft project? Making a star headband from gorgeous metallic leather!

 
Add lots of stars to make a super star crown, or just add a couple of stars for a bit of subtle glamour. I think this headband would also be fab made from glitter felt.

This tutorial originally appeared on the Village Haberdashery's blog and was created using synthetic leather and other craft supplies from their shop.

You will need:

- The star templates (follow the link to view and download the PDF)
- Some synthetic leather
- Coordinating felt (I used black to match the headband) 
- A plastic headband
- Craft glue
- Sewing scissors
- An air-erasable fabric marker pen or an ordinary felt tip pen
- A glue gun and glue
- A heatproof mat for the glue gun
- Newspaper or scrap paper to protect your workspace

To make the headband: 

Use the templates provided to cut out as many stars as you want – I cut one large star and four small stars. Trace the star shapes onto the back of the leather using a pen then cut them out with sewing scissors.

Cut pieces of felt slightly bigger than each star. Turn the stars over and place them on some newspaper or scrap paper. One by one, cover the back of each star with a layer of craft glue and then firmly press a piece of felt on top covering the star completely. Turn the felt and attached stars over and set them aside to dry.

Once the glue has completely dried cut away the excess felt, leaving stars which are leather on one side and felt on the other.

Use a glue gun to stick the stars to a headband. Add a line of glue down the centre of one of the stars, on the felt side. Carefully press the star into position on the headband, holding it in place until the glue has dried enough to stick it firmly. Repeat to add the rest of the stars

IMPORTANT: take care when working with the glue gun as the glue gets very hot! Always place it on a heat-proof mat when not in use, and use newspaper or other scrap paper to protect your workspace. Work slowly, squeezing the gun with care to control the amount of glue you’re using and keeping your fingers out of the way of the hot glue.

Want to make more fun things from faux leather? Try my tutorials for making a lightning bolt brooch, a mini covered notebook, and a geometric necklace.


This tutorial is for non commercial use only: you can use it to make as many headbands as you want for yourself or as gifts, but please don't make any for sale. You may borrow a couple of photos if you want to blog about this project, but remember to credit me and link back to this page on my blog, and do not reproduce my entire tutorial / share my templates on your site. Thanks!

Enjoyed this free tutorial? Buy me a "coffee" and help support my blog!


P.S. Subscribe to my newsletter for a monthly free pattern and visit my crafty tutorial archive for lots more free projects.

Visit my shop to buy my printable PDF sewing patterns:

Faux Leather Crafts: Lightning Bolt Brooch Tutorial

This week I'm sharing four tutorials for making stuff using synthetic (vegan) leather.

First up, sewing a bold lightning bolt brooch:

This brooch would look particularly fab pinned to a black coat or sweater, and would make a fun gift for a Harry Potter fan.

Synthetic leather looks great and is really easy to cut and sew... but if you don't have any faux leather, don't worry! You can use felt for making this lightning bolt brooch instead! The template sheet also includes star templates which you could use to make star brooches (these would look awesome cut from metallic faux leather or glitter felt).

This tutorial originally appeared on the Village Haberdashery's blog and was created using synthetic leather and other craft supplies from their shop.

You will need:

- The lightning bolt template (follow the link to view and download the PDF)
- Some synthetic leather
- Coordinating felt
- Matching sewing threads
- A brooch clasp
- A sewing needle
- Sewing scissors
- An air-erasable fabric marker pen or an ordinary felt tip pen

To make a lightning bolt brooch:

Use the template provided to cut out the bolt shape from yellow or metallic leather. Turn the template over and place it on the back of the leather, draw around it with a pen then cut it out with sewing scissors. Then place the bolt on a backing piece of contrasting leather.

Use whip stitch and matching sewing thread to sew the bolt to the backing leather.

Cut out the bolt, leaving a border framing the shape.

Use the shape you’ve just cut out as a template to cut a matching piece of felt. Turn the felt shape over and add a brooch clasp. Sew the clasp in place securely with a double thickness of matching sewing thread.

 

Place the front and back of the brooch together and sew the edges together with blanket stitch and matching sewing thread.

UPDATE: for more faux leather goodness, why not make a star headband, a geometric necklace, or a mini covered notebook.


This tutorial is for non commercial use only: you can use it to make as many brooches as you want for yourself or as gifts, but please don't make any for sale. You may borrow a couple of photos if you want to blog about this project, but remember to credit me and link back to this page on my blog, and do not reproduce my entire tutorial / share my templates on your site. Thanks!

Enjoyed this free tutorial? Buy me a "coffee" and help support my blog!


P.S. Subscribe to my newsletter for a monthly free pattern and visit my crafty tutorial archive for lots more free projects.

Visit my shop to buy my printable PDF sewing patterns:

Geometric Faux Leather Necklace Tutorial

UPDATE: my vegan faux leather craft tutorials are now available here on my blog! Make a lightning bolt brooch, a geometric necklace, a star headband, or a mini covered notebook.

----

The final faux leather tutorial I designed for The Village Haberdashery is now up on their blog: how to make a geometric necklace!

I loved working with the sheets of faux leather, especially the metallic gold - doesn't it look fab with the turquoise blue?

Click here for the step-by-step necklace tutorial.

And here are some handy links to the faux leather tutorials I wrote earlier: a star headband, a mini notebook,and a lightning bolt brooch. The headband, necklace and lightning bolt would also be fab made with felt!

Subscribe to my newsletter for a monthly free pattern and visit my crafty tutorial archive for lots more free projects.

Faux Leather Lightning Bolt Brooch Tutorial

UPDATE: my vegan faux leather craft tutorials are now available here on my blog! Make a lightning bolt brooch, a geometric necklace, a star headband, or a mini covered notebook.

---- 

Last year I designed a few fun and easy tutorials for The Village Haberdashery's blog using a pack of super cool faux leather.

The first project was a stylish star headband, the second a cute mini notebook... and the third is a lightning bolt brooch:

 

Click here for the free step by step tutorial!

Fancy some more free tutorials? Subscribe to my newsletter for a monthly free pattern and visit my crafty tutorial archive for lots more free projects.

Faux Leather Mini Notebook Tutorial

UPDATE: my vegan faux leather craft tutorials are now available here on my blog! Make a lightning bolt brooch, a geometric necklace, a star headband, or a mini covered notebook.

----

The second of my vegan leather craft tutorials is up on the Village Haberdashery's blog: a step by step guide to making a mini notebook with a faux leather cover.

These mini notebooks would make fab gifts - and great stocking fillers. (Have you started thinking about your Christmas gifting yet??? Because I totally have - the 25th of December seems to creep up faster every year!).

Click here for the free tutorial.

Fancy some more free tutorials? Subscribe to my newsletter for a monthly free pattern and visit my crafty tutorial archive for lots more free projects.
 

Faux Leather Star Headband Tutorial

UPDATE: my vegan faux leather craft tutorials are now available here on my blog! Make a lightning bolt brooch, a geometric necklace, a star headband, or a mini covered notebook.

----

Have you ever made anything from faux leather? I hadn't until recently, when the folks at The Village Haberdashery sent me a pack to get crafty with. It turns out to be very fun stuff - and vegan-friendly, too!

I've designed four easy tutorials for things to make with faux leather, which will be popping up on the Village Haberdashery blog in the coming weeks. Click here for the first tutorial: a guide to making a shiny star headband.

This tutorial is perfect for using one of the metallic faux leather sheets...

... isn't that gold just delicious? (I never can resist shiny things).

You'll find the free step by step tutorial HERE and the faux leather packs HERE.

Fancy some more free tutorials? Subscribe to my newsletter for a monthly free pattern and visit my crafty tutorial archive for lots more free projects.