Hello
I am doing a Craft Clinic on Monday the 27th of January on the new Brother Scan and Cut and would like to get our viewers involved.
I woul like you to send me any questions you would like to have addressed on the show so we can work the shows around them.
I am also on air on Sunday the 25 th with SUNDAY SCRAPPERS...Hoorah
We are doing a mix of Project Life and traditional scrapbooking.
Also..... I am doing Martha Stewart shows that weekend with New moulds for the clay...
See you then
Melanie xxxxxxx
Hi Mel, can't wait for my machine to come. I have two questions.
ReplyDelete1) can the scan and cut deal with dashed lines. If I scanned in a printed PDF template showing dashed score lines, will it recognise and cut them?
2) saving files on the machine means you can't sort them into categories or name them. If I save to USB can I do that?
Great demos from you and John, can't wait to see more.
Thanks
Diane
Hi Mel
ReplyDeleteI also can not wait for mine to come :)
You showed that you can cut acrylic , would it be possible to etch acrylic?
Thanks
Sharon
Hi Mel i haven't taken the plunge and ordered one YET but i was wondering if brother are going to do metalic pens as i know you have asked them to do solvent black and brown pens i wondered if this would be possible. Also is there anywhere on line i can design like other cutting machines and then take the designs to the machine via the usb as i like to design whilst watching tv with my hubbie. Only bought a silhouette portrait less than a year ago and i already have a personnel cricut but must admit i am very tempted. Thanks look forward to seeing you on TV xxxx
ReplyDeleteHI Mel
ReplyDeleteI also cannot wait for my machine to be delivered. All the demos yourself and John have been doing has got me so excited and full of ideas :)
I have a couple of questions:
1) Since the machine can cut do flex and chipboard - could it also cut grunge paper and grunge board and what would the settings be and which blade would I use?
2) What would the settings be for kiss cutting vinyl so that you leave the sticky backing intact?
Thanks again for all your inspiration
Alison
Hi Mel.. I too cannot wait for machine to arrive. I would like to do mostly material cutting for applique, etc. I am getting confused with a few things:
ReplyDeleteI think John reckons that a separate cutting mat is good to have (purple edge)
Is it also preferable to have a separate scanning mat for fabric?
Do you always have to support the fabric with fabric support, vylene? Is it possible to do it with freezer paper? (Am I showing my real ignorance here?)
I don't know how many times you guys have mentioned the spray adhesive - still haven't written the product down properly - still, when you spray the fabric - doesn't it end up on the cutting sheet and eventually make a horrible sticky mess?
Lastly, in the show you have just finished on C&C Friday 17 1600-1700 - I just caught the last part when you were placing the small flower decal in for cutting and you said something about - and I'm not going to throw the mat away - I must have missed something fundamental here?!?!?
And that's it.
Really impressed with the level of help you and John provide along with the C&C Team. Thank you.
Regards
Jackie Devonshire
PS - Also never posted a comment to a blog so not sure what the 'Comment as:' box below is - so hope I've chosen an appropriate profile........
Hi Sharon
ReplyDeleteNot sure what you mean by etch....actually I do know what you mean but are you asking if the machine will,do it?
Hi Jackie
ReplyDeleteI starch my fabric with a spray starch and then use heat and bond lite. John uses vylene as it can be removed. I don't know what freezer paper is but I will ask John.
I use crafters companion stick and spray and no it doesn't make a mess of the mat. Sometimes the backing paper from the heat and bond sticks to the mat but that is when I use stick and spray on the back of the fabric so I can still use them mat.
Please don't EVER spray the mat as it can block the rollers.
Hope that helps
Melanie xxx
Hi Alison
ReplyDeleteNeed to try grunge and get back to you. To kiss cut vinyl I put the cut pressure on 0 and the blade on one...depends on the vinyl though so give it a go. X
Hi Mel
ReplyDeleteThanks very much for making me buy the new ScanNCut - could really have done without it after a very expensive Christmas but, hey ho lol.
One of my reasons for buying is that I love to personalise all of my crafting but to able to do this you really need a vast array of alphabet stamps - I am hoping the scanncut will help with this. I also enjoy Iris folding so, again, being able to make aperture cards personal appeals to me as well.
A question: what happens when the tack starts to come from the feeder sheet - do we need to clean it in the way we do with acrylic stamps or shouldn't it be an issue? xx
Hi Sharon
ReplyDeleteEventually it will lose its stickiness so I would buy a spare but to be honest I use a repositional spray mount on the back of my card...NOT THE MAT!!!!!
Xx
Woohoo sunday scrappers is coming back, can't wait. Karen
ReplyDeleteHi Mel took the plunge this afternoon was going to wait a bit but thought what the heck I will go for the scan and cut now. I've not really been watching the demos and you may already have answered this, but can I download my Silhouette Portrait Library of shaped that I have bought onto a memory stick and use the designs on the scan and cut - are they compatable . Thanks Jackie
ReplyDeleteHi Jackie
ReplyDeleteAre the images copyright free?
Hi mel I am loving the shows you and john are doing. But what I would like to know is more about photos.
ReplyDeleteLike I know you can cut them, but can you actually copy and recreate them, like say I scanned in a picture of my little dog could I then draw him with the pens onto another piece if card?
Sorry if I sound stupid, but do not really know how the pens work hugs cheryl xx
I have a ScanNcut (Xmas) I live in Canada! How would you draw a design that has multiple colours? I am thinking it each colour would have to be saved as a sep. design???
ReplyDeleteOne thing I would like to see is - when you zoom in to do a 'fussy' cut - you don't have to come out of the zoom and move selection box around the item to be cut.
I have watched most of the shows that have been on Create and Craft and also purchase items like Super Smooth Decoupage paper that I can't get here and others from the UK.
Thank you for all your inspiration,
Regards, Dawn in Beautiful British Columbia
Hi Mel,
ReplyDeleteI have a mixture of questions and requests I hope you don't mind?
1. Is there an undo button? For example, if I have done a weld and realise that it isn't quite what I wanted can I go back a step? If not, I guess I can just save the item I am working on at regular intervals (as a new item)so that I don't have to start again and then delete the unwanted versions later.
2. Can scanned items be converted to other formats? Either to enable editting in other software or in the case of documents to be able to send them to others. Also it would be good to be able to scan photos in and print them.
3. Love the idea of a scoring pen.
4. Enabling a perforated cut would be good
5. Are brother planning any kind of forum for users to share/sell their creations. Silhouette have an online store and it is great.
6. Please can the brother Canvas software be made to work on Firefox.
7. If files are sorted into folders on the USB stick (so they are easy to find) can the machine navigate through the folders when searching the stick?
8. On the Cut/Draw screen, could the current blade and pressure settings be shown? I bet a lot of mats get cut through because folk forget the last cut was thick card and seeing the values would prompt the user to change if necessary or at least confirm they were OK.
As I have mentioned before, I am a Silhouette fan but the scanning feature and ability to cut thicker card really sold this to me. I love 3D projects and being able to cut thicker card will be a real bonus. I was also swayed to purchase knowing that you were on board as you come up with some great, less obvious ideas for everything you promote. Can't wait to see where your imagination takes you.
Kelly
Forgot, also could we have a white pen for use on black card?
ReplyDeleteThanks
Kelly
This comment has been removed by the author.
ReplyDeleteHi Mel. Regarding will it etch, can you alter the blade so that it etches the acrylic instead of cutting through? then you will be left with an image on the acrylic
ReplyDeleteThanks
Sharon
Hi Mel I have bought one....so excited. I tried to buy doflex but createncraft are out of stock. Can you find out whether they will get it in again and if not where can it be bought?
ReplyDeleteHi Mel it is Elaine from Kilmarnock again. Just wanted to say Thank You for all your great shows with the Scan n Cut. Your enthusiasm and knowledge is riveting. You are one of the great guest presenters. Keep up the good work. Can't wait for my Scan n Cut to arrive
ReplyDeleteHi Mel, I have really enjoyed all the shows with you and John, so much information and ideas. I ordered my machine early and am so looking forward to it coming. I make card samples and got it to take out the tedium of all that cutting, but realise that it is going to help with so much more.
ReplyDeleteYou and John seem to agree that you can cut out stamped and embossed images, but I am a little worried about possible flaking of the embossing material and would this cause damage to the machine ? Also are there any plans for a standard A4 cutting sheet?
Hi, Mel, I would like to know if you can cut grunge board and if so at what settings?
ReplyDeleteMany thanks Jacqui.
Hi Mel
ReplyDeleteLoving the shows. You're enthusiasm is infectious and I can't wait to get my machine. I missed out on the 24" cutting mat and wondered if I could use my Sillhouette mat.
Looking forward to all the extras you talk Brother into lol
Many thanks
Liz
Hi Mel
ReplyDeleteI've just signed up for you {and the machine) . I watched you with the box template and wondered if it was possible to group different elements of the design (as we do in Studio) - this would make your weeding out of unwanted cut lines easier. Also, is there any chance of Brother adding more fonts to those available. Silhouette have created a couple which, although still TTF, have been created with the parallel so close together they appear as informal cursive writing when drawn rather than as block text (they are obviously no good for cutting).
Excited to see what the next few months bring and if Brother come up with a fine line pen, I would invest in it and the penholder although I am not excited by the current batch although I haven't seen them demonstrated being used on the lowest pressure setting.
Thanks
Eddie
Hi Mel. I am loving all the new things you are coming up with and have an idea for you. I am a quilter and quilt each block as I go, that is the top stitching that holds the layers in pace. I make my own freehand designs and currenly copy them. No longer will I need to to that as I can draw, scan and then, using the pen that disappears, draw the pattern on top of the fabric and follow the lines on my machine. This will save me loads of time and I can replicate the same design for each block instead of each being slightly different. Come 12th February so I can play for real. Oh and can you try and get Brother to support Firefox, I can't be alone in wanting to use Canvas in my regular browser.
ReplyDeleteKeep up the wonderful work, just your enthusiasm makes me want to play NOW!
Hi Mel... loving all your shows and eagerly awaiting my machine. Would it be possible for Brother to give us options to write words in a curved line or in a circle or swirl?
ReplyDeleteYou and John must be floating on cloud 9!!.
Cheers
Heather W
x
Hi Mel, I'd love to know if BSC cuts acetate and if so at what settings. I've seen from your shows that it cuts doeflex - what setting did you do this on?
ReplyDeleteYou've got me so excited - I dreamt last night that it had arrived early and there were tons of us all online going cockahoop!!
Hi
ReplyDeleteI haven't tried grunge board yet but I will try and get my hands on some and get back to you. X
Hi
ReplyDeleteYou can't use your silhouette mats as it won't read them. X
Hello Mel,
ReplyDeleteI have really enjoyed your demos on the Brother scanNcut. Was wondering how you made the wonderful C&C Banner with all the colours. Was it complicated to get the various colour cards on there?
I am new to C&C and crafting but was impressed with the little words you cut with 'Peel-offs' on the scanNcut so I searched it out on the C&C website. The mixed colour pack doesn't seem to tell me what colours are in there, can you help with this?
ReplyDeleteI bought the machine after seeing all of your great demos (and John's) . So excited and looking forward to the Clinic on the 27th ...we can all learn from each other's questions on this exciting machine. .
ReplyDeleteI've ordered the machine after seeing the demos on TV. But what made me decide was the lovely menu board which was on display. Can you explain briefly what you've used? MDF and challkboard paint? And the inbuilt patterns?
ReplyDeleteHi Mel, loving the shows, soooo excited about the scan n cut, can you ask brother, any chance of a pen with clear embossing ink?
ReplyDeleteHi Mel, loving the shows, soooo excited about the scan n cut, can you ask brother, any chance of a pen with clear embossing ink?
ReplyDeleteHi Mel, I have enjoyed all the shows that you and John have done and well, what can I say - Fantastic, way better than the mini tutorials.
ReplyDeleteIn the edit screen, when you have an item selected and you zoom in, I would like to be able to move the design around but, at present we can't. I would like that feature and also second the request for metallic pens...
Thank you so much for sharing all your time and effort with us.
BTW, is there a users group at the moment???
Regards
Dawn
This comment has been removed by the author.
ReplyDeleteHi Mel - I've watched most of the demos and am waiting for our machine. I am fairly comfortable with electric cutters and have been becoming a little frustrated as you repeatedly underline the basic capabilities of the machine to prospective buyers (I know that is the object of the exercise but it does become a little flat). However in today's 1.00pm show you got me twitching when you said 'Let's see how small we can cut it' and out came that zingy peel-off cut out of the word 'sweet'.
ReplyDeleteJust the occasional testing of the limitations and thus demonstrating the true capabilities of the machine. I cut small and fine on the Cameo (and symmetrical lol) and I didn't order my machine with fine cutting in mind - what a bonus.
Eddie
Good morning Eddie
ReplyDeleteThank you for your comment. It seems like you are very happy with your silhouette and I will be very interested to hear your views on the brother Scan n Cut when it arrives.
I am very sorry that you have found the presentations of the machine frustrating and flat. I will endeavour to make them more interesting in the future, although we also have to cater for those viewers who aren't as comfortable with electronic cutting machines of which there are many.
I am sure you will come up with lots of fabulous ideas on your machine and I for one look forward to seeing your creations.
Take care
Melanie x. :)
Hi Mel I suggested the embossing ink pen, but after thinking this over it might not work it depends if the mat is taken through the rollers after part of the sentiment for example has been written, I'm sure you will have a better idea about that than me
ReplyDeleteI have just been looking through all my outline quilting designs and was wondering if you can use the coloured pens on plain fabric and what setting you would use. Would you be able to 'heat' set the ink for washing????
ReplyDeleteI have just joined a Yahoo group called SNCUsers - it says it is a restricted group but I joined and so did a friend.
ReplyDeleteMaybe others would like to see what this is about!
Mel, please can you tell me the size of the machine, the dimensions. I cant seem to find them anywhere. Thanks Lynne Preston x
ReplyDeleteHi Mel. I know a couple of people who are very interested in the new machine, but will not have internet access in their homes. I know the question of updating the machine software has been covered on air, but would it be possible to ask the people at Brother if there was any chance, in the future, that editing software like Canvas could be available on our home machines - as we have with Studio and MTC.
ReplyDeleteEddie
Me again Mel - curiosity this time, could you tell me why your blog clock shows you to be 8 hours behind us - I'm familiar with some cutting machines but this is the first time I've subscribed to a blog.
ReplyDeleteEddie
Hi Eddie
ReplyDeleteI know cutting machines but not computers!!!!! What do you mean by studio and MTC?
My blog clock is probably on US time!!!!!
Hi Mel I ordered the Brother Scan and Cut from create and craft after if saw you with it I had complete faith that I had made the right purchase. I have had my cricut expression for a long time and numerous cartridges I have also got a Cameo. I saw this morning that cricut have now brought out a new machine called Cricut Explore I really don't want another machine so I am hoping you will be sticking with the Scan and Cut for some time to come as I love how you make things so simple to understand on all your shows. Regards Ellen Lewis
ReplyDeleteMel, can you do perforations with the machine for example for the folding of a card.
ReplyDeleteHi Ellen
ReplyDeleteI have just seen the new Cricut and it needs to be linked to a computer....so I will be sticking with the BSC as well as using my Cricut expression. Xxxx
Hi
ReplyDeleteNo perforated cuts yet but all it will take is a dotted line as a piece of art work so I will ask the question. Xxxx
Hi Mel - Studio is the design software used with the Silhouette machines and MTC is Make The Cut, associated wi8th Zing machines and Pazzles etc. Sorry for presuming - I play war with others for using initials and acronyms and then go do it myself.
ReplyDeleteEddie
Hi Eddie
ReplyDeleteI see. I don't play war with anybody....life's too short,
Sorry I am being dim but what do you mean by home machines?
You will really have to spell it out for me as I really don't do anything on my computer than email and blog!!!!!!!!
I just want to make sure I am asking the correct questions when I see the guys from Brother. X
Hi Crazy bird.
ReplyDeleteI bought the kitchen board from the Range. They sell some fabulous home decor items. It had three wooden hearts on it which I removed and I think it was about £8.
Xxx
Hi Mel can I just start with saying I think you are wonderful the way you explain how to use the brother scan cut I have a cameo and have never really got on with it and the blades don't last 2 min's we'll not for me they don't lol can you please tell me will glitter card be ok with it and what Gsm does it cut keep up the brill work Mel and thank you Xxx
ReplyDeleteHi Mel - Sorry I'm being a bit imprecise - when I say home machines, I mean PC or laptop - will the Canvas program ever be available to purchase for installation onto the computer of people who don't have internet connection? I know people who won't have internet and I know others whose connection is so slow that using an online service is not an option for them.
ReplyDeleteThanks
Eddie
Hi Cath
ReplyDeleteGlad you have enjoyed the shows. Yes, it will cut glitter card just try and use one that doesn't shed. X it will cut a god weight if card and don't forget you get the deep cut blade too. X
Hi Ed
ReplyDeleteI will find out. I was meant to have a meeting with the guys from brother but. Am now booked up for shows over the next couple of weeks. Have lots to ask them though.
Take care
Melanie x
Hi Mel
ReplyDeleteI have a question based on experience from using my silhouette portrait. If I print of a page of toppers from a CD and then scan them in using the scan mat how do I know that if I then transfer them to the cutting mat that everything will line up properly, or if doing this type of cutting out do should I just scan and cut from one mat - the cutting mat. thanks Jackie Dawes
Hi Mel just read your answer re images I have purchased for my silhouette I have not read anything about copy rights on them I have purchased them as files for cutting so I can't see it would matter if I cut on the silhouette portrait or the brother scan and cut as they are freely available for purchase. Would the canvas set up allow me to convert them for use on the scan and cut.
ReplyDeleteRegards Jackie Dawes
Hi Jackie
ReplyDeleteI agree with you. Just have to be careful! You can go into scan and cut canvas and convert the files. I am investigating this for Mondays' craft clinic but if you need any help then I am sure John will help you through his blog. Gentleman crafter.
Hi Mel, I am really excited about the Brother Scan n Cut but I am unsure if it can do things in a small enough scale and still cut through the thickness of the materials I would need it to. I make miniatures in 1:12th/1:24th & 1:48th scale mostly one of a kind or dollshouse items aswell as doing card and fabric crafting. Please could you tell me how small the Scan n Cut can write and cut in millimeters? Perhaps Brother could do some very fine line pens like the ones used for Zentangle and metalic pens would be really good too. I would like to know if the Scan n Cut can cut through materials like Mount board used inside picture frames, MDF & Balsa wood in various thicknesses, thin Birch Plywood used for modelling, shrink plastic and leather. Also would it be able to cut tiny holes approximately 1mm in size or less than 1mm by piercing holes rather than cutting them into thick card, mount board, Balsa etc I make miniature woven cribs and baskets and if it could cut the base shape of the basket and then put holes in it at regular intervals for the canes to be inserted it would be a god send saving so much time. If it can cut through MDF it may be possible to cut out the components of scale model buildings. What is the thickest card it has cut so far? I hope I haven't rambled on too much! Thank you for the chance to ask questions. I look forward to seeing you on Create & Craft. Very Best Wishes Louisa
ReplyDeleteHi Louisa
ReplyDeleteCan you email me directly please. Melanieheaton@aol.com
I would like you to send me some of the product you mentioned so if a try it.
Thank
You
Melanie x
Hi Mel, will you ask brother if they will produce a bag that will fit the scan n cut, for taking to crops/storage.
ReplyDeleteGreat demos, all reordered!! Can't wait for machine to arrive.Tried to set up Brother Scan N Cut Cloud base, but it only lists a few countries not the UK? so registered as US, also worth knowing that you have to have Windows Internet Explorer 10, Chrome, Safari etc.So I downloaded Chrome just to use this site, and already have been playing! I can see endless possibilities to use with my Cameo designs, and have already printed many off ready to use when the machine arrives! Looking forward to the Clinic coming up, recorder set! Yes, Brother gold and silver pens are an absolute must please. Carry on with the great demos. Thank you
ReplyDeleteHi Mel
ReplyDeleteThis the first time I've looked at your blog
I've ordered the scancut
I've a couple of questions
Will brother be able or will produce a Blane that will cut mount board at a 45degree angle
Second can you download fonts to the machine
Can you upgrade the memory
Thanks
Bob
Hi Mel
ReplyDeleteThis the first time I've looked at your blog
I've ordered the scancut
I've a couple of questions
Will brother be able or will produce a Blane that will cut mount board at a 45degree angle
Second can you download fonts to the machine
Can you upgrade the memory
Thanks
Bob
can't wait, seems like it has been ages since we saw you scrapping. we definitely need more of these shows
ReplyDeleteHi Mel!!!!
ReplyDeleteFirst let me tell you that I really admire you and your work specially scrapbooking that is my first love in the area of craft. I'm in front of the tv to watch Sunday Scrappers that just started.
In relation to the new Brother Scan n Cut I would like to know if I can cut craft foam (2mm) in the machine. It would be perfect for my new craft :)
Mel, love your demos of SNC on C&Ctv. I saw you cut something I think you called 'craft metal'. It was a lovely flower shape in pink/mauve. I am new to crafting other than sewing. Please can you let me know where I can get this material? does C&Ctv have this?
ReplyDeleteHi mo
ReplyDeleteNot sure if they stock it. I will have a look tomorrow and get back to you. Xxx
Hi Mel,
ReplyDeleteExcitedly waiting the arrival of my Scan n Cut (just got to work out how to tell hubby about my new purchase!!) I make many items from greyboard. I gave up trying to cut it with my Cricut. Have you tried the Scan n Cut with a medium weight greyboard?
Hi Mel,
ReplyDeleteJust been watching you on Craft Clinic. You said that we could use CC Fabric Stick and Spray and spray starch instead of stabiliser. I understand the starch but am confused as to why you need S&S. Is it to help hold the fabric to mat or does it serve another purpose?
Roll on 10th Feb! x
Hi Mel just want to say what a Craft Clinic today you did absolutely brilliant, and thank's for the blade setting,s I no I am a pain but would it be the same for glitter card Mel i love glitter card but my cameo don't do it good and when it does it backers the blades that's another reson I am going to try the scan & cut you say the blade's are well made thank you for all your hard work Mel XXx
ReplyDeleteHi
ReplyDeleteI have actually placed an order for the Scan n Cut as I am very impressed by what I have seen on C&C but could you please ask Mel, in her opinion, is it the best electronic cutter on the market?
The reason I ask is because I already have an electronic cutter (Black Cat Lynx) and don't use it very much as I'm fed up with the (frankly) poor cut quality. It seems to have a mind of its own, I can cut the same image on the same card with the same blade on the same force and speed and the cardstock cuts ok sometimes and other times the cardstock is puckered (badly!) on the turns.
I am ok with computers and design my own svgs (using Inkscape) so the fact that the Scan n Cut doesn't connect to a pc is more of a disadvantage to me but I can understand the huge advantage for others and I can easily use the usb feature so don't think it will be a problem. My biggest need is for great cut quality.
Many thanks
Sue Rollings
Hi Mel, I have ordered my cut and scan and my husband wonderered whether it will cut sheet plastic which he uses for plastic modelling. It is 1 to 2mm thick.
ReplyDeleteHe also asks whether the pens will draw onto decal sheet.
I know this is an unusual question but hope you can help.
Hi Susan
ReplyDeleteI haven't tried any machines that need a computer but I can promise you that the BSC give you a very clean cut. A quick tip for your other machine could be that the speed needs to be on full and try AG
Dusting the pressure and blade depth. ie. you may need to decrease the pressure and increase the blade depth. Hope you don't mind me suggesting this.
Honestly though, the BSC does cut brilliantly and to get it through acrylic and magnetic sheet and then felt and fabric all with a swirly design and all with an impeccable cut sold it to me.
Hope that helps. Please feel free to ask any questions you may have.
Take care
Melanie xx
Hi Bob
ReplyDeleteI don't know if it would be possible to use a blade like that on a electronic cutting machine. I will ask the question though.
Hi bob
ReplyDeleteSorry forgot to answer the other part of your question. As Long as the font is copyright free then I would put them on to a USB stick. Will also ask the question about the memory. X
Hi Lena
ReplyDeleteYes, it cut craft foam. I will demo it for you tomorrow. X
Hi Sonja
ReplyDeleteCan you contact me directly please at melanieheaton@aol.com
I would like to try grey board for you. X
Hi Mel
ReplyDeleteI have enjoyed and recorded every show but would like to know if the machine will only cut around an image. Most of the demos such as the debbi moore decoupage it only cut around the apron but did not cut out the white bit between the bib and neckstrap and the doily was again only cut on the outside edge but did not cut out the bits on the inside. Hope this makes sense lol
Hi Mel , I've been loving the shows. Can we plug the machine into the pc and access the fonts we have on our pc? If not can you suggest that to Brother ? Thanks Nya
ReplyDeleteDear mel, please could you let me know how to get in touch with you I have a problem with my scan n cut thank you
ReplyDeleteHi Brenda
ReplyDeleteMelanieheaton@aol.com
Xx
Hi mel I am having trouble with my scan and cut machine when I have scaned something on my machine and saved it, and then I go back into to cut it half the lines are not there. This happens every time I do it really fed up with it now wished I hac not bought it. PLEASE HELP X
ReplyDeleteHi mel I am having trouble with my scan and cut machine when I have scaned something on my machine and saved it, and then I go back into to cut it half the lines are not there. This happens every time I do it really fed up with it now wished I hac not bought it. PLEASE HELP X
ReplyDeleteHi Jan
ReplyDeleteCan you email me please on melanieheaton@aol.com
I am at home today so hopefully we can sort it out for you. X
Mel I love all the shows you do and try to catch them all for all your wonderful tips. Yesterday I printed a sheet of circle sentiments and using the Brother did scan to cut with a 1mm boarder what am I doing wrong, the 1mm boarder was not an even distance on the disks though they cut out so quick couldn't have done 2 in the time the Brother took to do a full A4 sheet
ReplyDeleteHi mel do you know of any workshops around Redditch . for the brother scan n cut
ReplyDeletethanks Chris
Hi Christine
DeleteNot at the moment but I am hoping I will be allowed to do some in the future.
Hugs
Melanie x
Hi Sheila
ReplyDeleteCan you send me a picture if the cut to melanieheaton@netscape.net please so I can see how offset it is.
Thanks
Melanie x
Hi Mel, Have had my machine since March, and have a love-hate relationship with it!!! I mostly love it, but have some problems which are really difficult to solve on your own. Is there a forum somewhere I can log into please? My current problem is that I like making flowers from paper, but the machine is tearing the paper. I have tried a new blade, altered the cutting depth etc. but it still tears the paper! Any suggestions please?
ReplyDeleteLove watching you on TV, you are sooooo confident.
Regards
Jeanne
Hi Jeanne
DeleteCan you tell me what your pressure and speed settings are on please.xxx
https://www.youtube.com/watch?v=Vjh64v7tPPk
ReplyDeleteHi Matt,
I have just received My ScanNCut and is now out of the box. I have subscribed to Paper Dreams Blog and have watched the Video above. My question is
What is the use of overlap removal in the tutorial, I didn't understand why you used that feature?
Many thanks
Jacqui
Hi Mel
ReplyDeleteI scanned in a sheet of tags that I printed in black and white , I wanted to do a direct cut but it only recognised 6 out of the 9 on the sheet and only cut 6. Have you any idea what went wrong.Thanks
Hi Mel
ReplyDeleteHow did the test run for the grey board go? Want to start making some gift boxes using this material, so would be great to have some tips on machine setting.
Many Thanks
Aneka