Impressed Current Cathodic Protection (ICCP) system

 
This system is used for preventing corrosion of ship’s hull plate including rudder and propeller, contacting with sea water. How this system work is based on electrochemical principle. It can be installed in new ships or old ships that hull’s paint is partly damaged from corrosion. It has been designed based on ship’s total wetted surface area of hull and mean current density. It’s full automatic system.

The ICCP system consists of anodes and electrodes for installation through the hull using penetration arrangements, a power supply unit for location internally and bonding arrangements for attachments such as propeller or rudder.
 
When this system starts, Power supply unit will automatically transmit current to anode cells by measuring number of electrons lost from reference cells. It can save the cost of renewal of sacrificial anodes to be carry out every vessel’s dry dock

The most efficiently protective current is automatically controlled and dissipated through anodes for the optimum constantly measured by reference cells.

Our ICCP advantage features are

•    Auto/ Manual mode
•    4.3” TFT Touch screen LCD display
•    Data download is applicable through USB memory
•    Very convenient operation on easy and sophisticated controller
•    Data communication and alarm signal can be connected to ship’s AMS
•    Simple installation to all kinds of new building as well as retrofitting ships


 

Anti-fouling System : Marine Growth Preventing System (M.G.P.S.)

M.G.P.S is Anti-fouling system to kill marine bio-fouling and to suppress fouling corrosion in pipe work. It has been designed based on the ship’s flow rate, lifetime and dosing rate.
The Cu anode produces copper ions to prevent marine growth and the Al/Fe anode produces anticorrosive layer to suppress corrosion. And the anode between Cu-Al is adopted for steel pipe line and the anodes between Cu-Fe is adopted for non-steel pipe line.
 
Use with the systems :

 
Our Anti-fouling advantage features are
•    Touch screen controller is applicable 
•    Low installation/maintenance costs and safe
•    Environmental friendly with normal dosing rate of copper ion
•    Very convenient operation on easy and sophisticated controller
•    Data communication and alarm signal can be connected to ship’s AMS
•    Simple installation to all kinds of new building ships as well as retrofitting ships  
•    Capable of auto current change acc to 2 or 3 steps flow operation