Inter Quartile Range ( I Q R ) for the smolt data.

Question

Want to see more full solutions like this?

Answer 1

Question

Chapter 1.3, Problem 70E

(a)

To determine

To find: Inter Quartile Range (IQR) for the smolt data.

(a)

Expert Solution

Answer to Problem 70E

Solution: The Inter Quartile Range (IQR) is 13.54.

Explanation of Solution

Calculation: The Inter Quartile Range (IQR) can be obtained by using the Minitab software.

Follow the steps given below:

Step 1: Enter the data in a Minitab worksheet.

Step 2: Go to Stat and select basic statistics.

Step 3: Then select Display Descriptive Statistics. Enter the name of the column containing the Reflectance data in the variables textbox.

Step 4: Then click on Statistics tab and tick mark the option against Interquartile Range and click on OK twice.

From the Minitab output the Inter Quartile Range (IQR) is 13.54.

Interpretation: The Inter Quartile Range (IQR) refers to difference between Third Quartile (Q3) and First quartile (Q1), that is, IQR=Q3−Q1. IQR indicates the spread of dataset.

(b)

To determine

To find: The outliers using 1.5×(IQR) rule.

(b)

Expert Solution

Answer to Problem 70E

Solution: There are no outliers in the provided data. Any value above 77.48 or below 23.32 would be considered outliers as they are upper whisker and lower whisker, respectively. There is no value above or below those numbers respectively.

Explanation of Solution

Calculation: To obtain the value of first and third quartile, follow the steps given below in Minitab,

Step 1: Enter the data in a Minitab worksheet.

Step 2: Go to Stat and select basic statistics.

Step 3: Then select Display Descriptive Statistics. Enter the name of the column containing the Reflectance data in the variables textbox.

Step 4: Then click on Statistics tab and tick mark the option against first quartile and third quartile and click on OK twice.

The value of Q1 is 43.63 and Q3 is 57.17 as shown in Minitab.

The formula for upper whisker is,

UW=Q3+1.5×(IQR)

Where Q1 is first quartile, Q3 is third quartile and IQR is Q3−Q1. So,

UW=Q3+1.5×(Q3−Q1)UW=57.17+1.5×(57.17−43.63)UW=77.48

The formula for lower whisker is,

LW=Q1−1.5×(IQR).

where Q1 is first, Q3 is third quartile, and IQR is Q3−Q1. So,

LW=Q1−1.5×(Q3−Q1)LW=43.63−1.5×(57.17−43.63)LW=23.32

Upper whisker of boxplot is found to be 77.48, so any values above 77.48 would be considered outliers. There is no value that is either above upper whisker or below lower whisker, so there is no outlier.

Interpretation: Outliers refers to those data points that lie either above upper whisker or below lower whisker in boxplot. From the calculations done above, it is clear that the data does not contain any outlier.

(c)

To determine

To graph: A boxplot of the provided data and describe the distribution using it.

(c)

Expert Solution

Explanation of Solution

Graph: Follow the steps given below to obtain the boxplot:

Step 1: Enter the data into a Minitab worksheet.

Step 2: Go to ‘Graph’ and click on ‘Boxplot’.

Step 3: In the dialogue box that appears select ‘Simple’ and click OK.

Step 4: Next enter the name of the column containing the data of reflectance of smolts in the filed marked as ‘Graph variables’ and click on OK.

The boxplot is obtained as shown below,

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 1

Interpretation: The boxplot is generally preferred to describe data set having unsymmetrical distribution. The boxplot shows First quartile, Median, and Third quartile. The boxplot of the data represents there are no outliers in the data.

(d)

To determine

To graph: A modified boxplot and describes the distribution using it.

(d)

Expert Solution

Explanation of Solution

Graph: Follow the steps given below to obtain the modified boxplot:

Step 1: Enter the data into a Minitab worksheet.

Step 2: Go to ‘Graph’ and click on ‘Boxplot’.

Step 3: In the dialogue box that appears select ‘Simple’ and click OK.

Step 4: Next enter the name of the column containing the data of reflectance of smolts in the filed marked as ‘Graph variables’ and click on OK.

The boxplot is obtained as shown below,

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 2

Interpretation: The modified boxplot is generally used to display data graphically when the distribution of data is unsymmetrical and skewed as it can clearly show outliers. In the above modified boxplot, there is no outlier, which indicates that the data distribution is symmetrical.

(e)

To determine

To graph: A stem plot of the provided data.

(e)

Expert Solution

Answer to Problem 70E

Solution: The stemplot of the data is shown below:

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 3

Explanation of Solution

Graph:

Follow the steps given below to obtain the stemplot:

Step 1: Enter the provided data in a Minitab worksheet.

Step 2: Go to Graph and select stem and leaves.

Step 3: Enter the name of the column containing the provided data in the Graph variables textbox and click on OK.

The obtained stem plot is displayed below,

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 4

Interpretation: The stemplot of data is generally drawn when size of data is somewhat small and all the data values are positive. The graph shows all the data values on stemplot. In the stemplot shown above there is no outliers and therefore, it indicates that the distribution of the data is symmetrical.

(f)

To determine

To find: The Boxplot, Modified boxplot, and stemplot and their advantages and disadvantages.

(f)

Expert Solution

Answer to Problem 70E

Solution: In boxplot, data is displayed based on five-number summary, which includes Minimum, Maximum, First quartile, Third Quartile, and Median. In Modified boxplot, also data is displayed based on five-number summary, but it also shows outliers. In stemplot, data values are arranged in stem consisting of all digits except right most and leaves contain final digit. Advantages of boxplots is that it is suitable for large unsymmetrical data while advantages of stemplot is that it shows all numerical value of data on graph itself. Disadvantage of Boxplot is that it is not suitable for unsymmetrical data and it does not retain exact numerical values while disadvantage of stemplot is that it is used only for positive numbers only and if data size is small.

Explanation of Solution

The comparison of Boxplot, Modified boxplot, and stemplot is shown below:

	Boxplot	Modified Boxplot	Stemplot
Description	It displays data based on five number summary, including Minimum, Maximum, First quartile, Third Quartile and Median.	It displays data based on five number summary including Minimum, Maximum, First quartile, Third Quartile and Median.	In stemplot data values are arranged in stem consisting of all digits except right most digit and leaves contain final digit
Advantages	1. It displays five number summary graphically. 2. It is suitable for unsymmetrical data. 3. It can handle large data set.	1. It displays five number summary. 2. It is suitable for unsymmetrical data which is skewed. 3. It shows outliers clearly.	1. It can display both symmetrical and unsymmetrical data graphically. 2. It can indicate outliers also. 3. It displays all numerical values of data on stemplot.
Disadvantages	1. It is not suitable for data set having symmetrical distribution. 2. It does not display outliers on graph.	1. It is not suitable for data set having symmetrical distribution.	1. It is not suitable if data size is very large. 2. It is not used for negative numbers.

Interpretation: There are various ways to display data graphically, Boxplot is suitable for unsymmetrical data which are skewed, it can handle large data set as well, it shows five-number summary and displays Maximum, Minimum, first quartile, third quartile, and median, and also shows outliers. Stemplot plot is used if data size is small and greater than 0.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Students have asked these similar questions

Fred needs to choose a password for a certain website. Assume that he will choose an 8-character password, and that the legal characters are the lowercase letters a, b, c, ..., z, the uppercase letters A, B, C, ..., Z, and the numbers 0, 1, . . ., 9. (a) How many possibilities are there if he is required to have at least one lowercase letter in his password? (b) How many possibilities are there if he is required to have at least one lowercase letter and at least one uppercase letter in his password? (c) How many possibilities are there if he is required to have at least one lowercase letter, at least one uppercase letter, and at least one number in his password?

a =1500, b=1700 what is percentage of a is b

A 12-inch bar that is clamped at both ends is to be subjected to an increasing amount of stress until it snaps. Let Y = the distance from the left end at which the break occurs. Suppose Y has the following pdf. f(y) = { (a) Compute the cdf of Y. F(y) = 0 0 y -옴) 0 ≤ y ≤ 12 1- 12 y 12 Graph the cdf of Y. F(y) 1.0 0.8 0.6 0.4 0.2 y 2 6 8 10 12 F(y) F(y) F(y) 1.01 1.0ㅏ 1.0 0.8 0.6 0.4 0.2 0.8 0.8 0.6 0.4 ཨཱུ སྦེ 0.6 0.4 0.2 2 4 6 8 10 12 (b) Compute P(Y ≤ 5), P(Y > 6), and P(5 ≤ y ≤ 6). (Round your answers to three decimal places.) P(Y ≤ 5) = P(Y > 6) = P(5 ≤ y ≤ 6) = (c) Compute E(Y), E(y²), and V(Y). E(Y) = in E(Y2) v(x) = in 2 2 2 4 6 8 10 12 y 2 4 6 8 10 12

Answer 2

Question

Chapter 1.3, Problem 70E

(a)

To determine

To find: Inter Quartile Range (IQR) for the smolt data.

(a)

Expert Solution

Answer to Problem 70E

Solution: The Inter Quartile Range (IQR) is 13.54.

Explanation of Solution

Calculation: The Inter Quartile Range (IQR) can be obtained by using the Minitab software.

Follow the steps given below:

Step 1: Enter the data in a Minitab worksheet.

Step 2: Go to Stat and select basic statistics.

Step 3: Then select Display Descriptive Statistics. Enter the name of the column containing the Reflectance data in the variables textbox.

Step 4: Then click on Statistics tab and tick mark the option against Interquartile Range and click on OK twice.

From the Minitab output the Inter Quartile Range (IQR) is 13.54.

Interpretation: The Inter Quartile Range (IQR) refers to difference between Third Quartile (Q3) and First quartile (Q1), that is, IQR=Q3−Q1. IQR indicates the spread of dataset.

(b)

To determine

To find: The outliers using 1.5×(IQR) rule.

(b)

Expert Solution

Answer to Problem 70E

Solution: There are no outliers in the provided data. Any value above 77.48 or below 23.32 would be considered outliers as they are upper whisker and lower whisker, respectively. There is no value above or below those numbers respectively.

Explanation of Solution

Calculation: To obtain the value of first and third quartile, follow the steps given below in Minitab,

Step 1: Enter the data in a Minitab worksheet.

Step 2: Go to Stat and select basic statistics.

Step 3: Then select Display Descriptive Statistics. Enter the name of the column containing the Reflectance data in the variables textbox.

Step 4: Then click on Statistics tab and tick mark the option against first quartile and third quartile and click on OK twice.

The value of Q1 is 43.63 and Q3 is 57.17 as shown in Minitab.

The formula for upper whisker is,

UW=Q3+1.5×(IQR)

Where Q1 is first quartile, Q3 is third quartile and IQR is Q3−Q1. So,

UW=Q3+1.5×(Q3−Q1)UW=57.17+1.5×(57.17−43.63)UW=77.48

The formula for lower whisker is,

LW=Q1−1.5×(IQR).

where Q1 is first, Q3 is third quartile, and IQR is Q3−Q1. So,

LW=Q1−1.5×(Q3−Q1)LW=43.63−1.5×(57.17−43.63)LW=23.32

Upper whisker of boxplot is found to be 77.48, so any values above 77.48 would be considered outliers. There is no value that is either above upper whisker or below lower whisker, so there is no outlier.

Interpretation: Outliers refers to those data points that lie either above upper whisker or below lower whisker in boxplot. From the calculations done above, it is clear that the data does not contain any outlier.

(c)

To determine

To graph: A boxplot of the provided data and describe the distribution using it.

(c)

Expert Solution

Explanation of Solution

Graph: Follow the steps given below to obtain the boxplot:

Step 1: Enter the data into a Minitab worksheet.

Step 2: Go to ‘Graph’ and click on ‘Boxplot’.

Step 3: In the dialogue box that appears select ‘Simple’ and click OK.

Step 4: Next enter the name of the column containing the data of reflectance of smolts in the filed marked as ‘Graph variables’ and click on OK.

The boxplot is obtained as shown below,

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 1

Interpretation: The boxplot is generally preferred to describe data set having unsymmetrical distribution. The boxplot shows First quartile, Median, and Third quartile. The boxplot of the data represents there are no outliers in the data.

(d)

To determine

To graph: A modified boxplot and describes the distribution using it.

(d)

Expert Solution

Explanation of Solution

Graph: Follow the steps given below to obtain the modified boxplot:

Step 1: Enter the data into a Minitab worksheet.

Step 2: Go to ‘Graph’ and click on ‘Boxplot’.

Step 3: In the dialogue box that appears select ‘Simple’ and click OK.

Step 4: Next enter the name of the column containing the data of reflectance of smolts in the filed marked as ‘Graph variables’ and click on OK.

The boxplot is obtained as shown below,

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 2

Interpretation: The modified boxplot is generally used to display data graphically when the distribution of data is unsymmetrical and skewed as it can clearly show outliers. In the above modified boxplot, there is no outlier, which indicates that the data distribution is symmetrical.

(e)

To determine

To graph: A stem plot of the provided data.

(e)

Expert Solution

Answer to Problem 70E

Solution: The stemplot of the data is shown below:

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 3

Explanation of Solution

Graph:

Follow the steps given below to obtain the stemplot:

Step 1: Enter the provided data in a Minitab worksheet.

Step 2: Go to Graph and select stem and leaves.

Step 3: Enter the name of the column containing the provided data in the Graph variables textbox and click on OK.

The obtained stem plot is displayed below,

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 4

Interpretation: The stemplot of data is generally drawn when size of data is somewhat small and all the data values are positive. The graph shows all the data values on stemplot. In the stemplot shown above there is no outliers and therefore, it indicates that the distribution of the data is symmetrical.

(f)

To determine

To find: The Boxplot, Modified boxplot, and stemplot and their advantages and disadvantages.

(f)

Expert Solution

Answer to Problem 70E

Solution: In boxplot, data is displayed based on five-number summary, which includes Minimum, Maximum, First quartile, Third Quartile, and Median. In Modified boxplot, also data is displayed based on five-number summary, but it also shows outliers. In stemplot, data values are arranged in stem consisting of all digits except right most and leaves contain final digit. Advantages of boxplots is that it is suitable for large unsymmetrical data while advantages of stemplot is that it shows all numerical value of data on graph itself. Disadvantage of Boxplot is that it is not suitable for unsymmetrical data and it does not retain exact numerical values while disadvantage of stemplot is that it is used only for positive numbers only and if data size is small.

Explanation of Solution

The comparison of Boxplot, Modified boxplot, and stemplot is shown below:

	Boxplot	Modified Boxplot	Stemplot
Description	It displays data based on five number summary, including Minimum, Maximum, First quartile, Third Quartile and Median.	It displays data based on five number summary including Minimum, Maximum, First quartile, Third Quartile and Median.	In stemplot data values are arranged in stem consisting of all digits except right most digit and leaves contain final digit
Advantages	1. It displays five number summary graphically. 2. It is suitable for unsymmetrical data. 3. It can handle large data set.	1. It displays five number summary. 2. It is suitable for unsymmetrical data which is skewed. 3. It shows outliers clearly.	1. It can display both symmetrical and unsymmetrical data graphically. 2. It can indicate outliers also. 3. It displays all numerical values of data on stemplot.
Disadvantages	1. It is not suitable for data set having symmetrical distribution. 2. It does not display outliers on graph.	1. It is not suitable for data set having symmetrical distribution.	1. It is not suitable if data size is very large. 2. It is not used for negative numbers.

Interpretation: There are various ways to display data graphically, Boxplot is suitable for unsymmetrical data which are skewed, it can handle large data set as well, it shows five-number summary and displays Maximum, Minimum, first quartile, third quartile, and median, and also shows outliers. Stemplot plot is used if data size is small and greater than 0.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Answer 3

Question

Chapter 1.3, Problem 70E

(a)

To determine

To find: Inter Quartile Range (IQR) for the smolt data.

(a)

Expert Solution

Answer to Problem 70E

Solution: The Inter Quartile Range (IQR) is 13.54.

Explanation of Solution

Calculation: The Inter Quartile Range (IQR) can be obtained by using the Minitab software.

Follow the steps given below:

Step 1: Enter the data in a Minitab worksheet.

Step 2: Go to Stat and select basic statistics.

Step 3: Then select Display Descriptive Statistics. Enter the name of the column containing the Reflectance data in the variables textbox.

Step 4: Then click on Statistics tab and tick mark the option against Interquartile Range and click on OK twice.

From the Minitab output the Inter Quartile Range (IQR) is 13.54.

Interpretation: The Inter Quartile Range (IQR) refers to difference between Third Quartile (Q3) and First quartile (Q1), that is, IQR=Q3−Q1. IQR indicates the spread of dataset.

(b)

To determine

To find: The outliers using 1.5×(IQR) rule.

(b)

Expert Solution

Answer to Problem 70E

Solution: There are no outliers in the provided data. Any value above 77.48 or below 23.32 would be considered outliers as they are upper whisker and lower whisker, respectively. There is no value above or below those numbers respectively.

Explanation of Solution

Calculation: To obtain the value of first and third quartile, follow the steps given below in Minitab,

Step 1: Enter the data in a Minitab worksheet.

Step 2: Go to Stat and select basic statistics.

Step 3: Then select Display Descriptive Statistics. Enter the name of the column containing the Reflectance data in the variables textbox.

Step 4: Then click on Statistics tab and tick mark the option against first quartile and third quartile and click on OK twice.

The value of Q1 is 43.63 and Q3 is 57.17 as shown in Minitab.

The formula for upper whisker is,

UW=Q3+1.5×(IQR)

Where Q1 is first quartile, Q3 is third quartile and IQR is Q3−Q1. So,

UW=Q3+1.5×(Q3−Q1)UW=57.17+1.5×(57.17−43.63)UW=77.48

The formula for lower whisker is,

LW=Q1−1.5×(IQR).

where Q1 is first, Q3 is third quartile, and IQR is Q3−Q1. So,

LW=Q1−1.5×(Q3−Q1)LW=43.63−1.5×(57.17−43.63)LW=23.32

Upper whisker of boxplot is found to be 77.48, so any values above 77.48 would be considered outliers. There is no value that is either above upper whisker or below lower whisker, so there is no outlier.

Interpretation: Outliers refers to those data points that lie either above upper whisker or below lower whisker in boxplot. From the calculations done above, it is clear that the data does not contain any outlier.

(c)

To determine

To graph: A boxplot of the provided data and describe the distribution using it.

(c)

Expert Solution

Explanation of Solution

Graph: Follow the steps given below to obtain the boxplot:

Step 1: Enter the data into a Minitab worksheet.

Step 2: Go to ‘Graph’ and click on ‘Boxplot’.

Step 3: In the dialogue box that appears select ‘Simple’ and click OK.

Step 4: Next enter the name of the column containing the data of reflectance of smolts in the filed marked as ‘Graph variables’ and click on OK.

The boxplot is obtained as shown below,

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 1

Interpretation: The boxplot is generally preferred to describe data set having unsymmetrical distribution. The boxplot shows First quartile, Median, and Third quartile. The boxplot of the data represents there are no outliers in the data.

(d)

To determine

To graph: A modified boxplot and describes the distribution using it.

(d)

Expert Solution

Explanation of Solution

Graph: Follow the steps given below to obtain the modified boxplot:

Step 1: Enter the data into a Minitab worksheet.

Step 2: Go to ‘Graph’ and click on ‘Boxplot’.

Step 3: In the dialogue box that appears select ‘Simple’ and click OK.

Step 4: Next enter the name of the column containing the data of reflectance of smolts in the filed marked as ‘Graph variables’ and click on OK.

The boxplot is obtained as shown below,

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 2

Interpretation: The modified boxplot is generally used to display data graphically when the distribution of data is unsymmetrical and skewed as it can clearly show outliers. In the above modified boxplot, there is no outlier, which indicates that the data distribution is symmetrical.

(e)

To determine

To graph: A stem plot of the provided data.

(e)

Expert Solution

Answer to Problem 70E

Solution: The stemplot of the data is shown below:

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 3

Explanation of Solution

Graph:

Follow the steps given below to obtain the stemplot:

Step 1: Enter the provided data in a Minitab worksheet.

Step 2: Go to Graph and select stem and leaves.

Step 3: Enter the name of the column containing the provided data in the Graph variables textbox and click on OK.

The obtained stem plot is displayed below,

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 4

Interpretation: The stemplot of data is generally drawn when size of data is somewhat small and all the data values are positive. The graph shows all the data values on stemplot. In the stemplot shown above there is no outliers and therefore, it indicates that the distribution of the data is symmetrical.

(f)

To determine

To find: The Boxplot, Modified boxplot, and stemplot and their advantages and disadvantages.

(f)

Expert Solution

Answer to Problem 70E

Solution: In boxplot, data is displayed based on five-number summary, which includes Minimum, Maximum, First quartile, Third Quartile, and Median. In Modified boxplot, also data is displayed based on five-number summary, but it also shows outliers. In stemplot, data values are arranged in stem consisting of all digits except right most and leaves contain final digit. Advantages of boxplots is that it is suitable for large unsymmetrical data while advantages of stemplot is that it shows all numerical value of data on graph itself. Disadvantage of Boxplot is that it is not suitable for unsymmetrical data and it does not retain exact numerical values while disadvantage of stemplot is that it is used only for positive numbers only and if data size is small.

Explanation of Solution

The comparison of Boxplot, Modified boxplot, and stemplot is shown below:

	Boxplot	Modified Boxplot	Stemplot
Description	It displays data based on five number summary, including Minimum, Maximum, First quartile, Third Quartile and Median.	It displays data based on five number summary including Minimum, Maximum, First quartile, Third Quartile and Median.	In stemplot data values are arranged in stem consisting of all digits except right most digit and leaves contain final digit
Advantages	1. It displays five number summary graphically. 2. It is suitable for unsymmetrical data. 3. It can handle large data set.	1. It displays five number summary. 2. It is suitable for unsymmetrical data which is skewed. 3. It shows outliers clearly.	1. It can display both symmetrical and unsymmetrical data graphically. 2. It can indicate outliers also. 3. It displays all numerical values of data on stemplot.
Disadvantages	1. It is not suitable for data set having symmetrical distribution. 2. It does not display outliers on graph.	1. It is not suitable for data set having symmetrical distribution.	1. It is not suitable if data size is very large. 2. It is not used for negative numbers.

Interpretation: There are various ways to display data graphically, Boxplot is suitable for unsymmetrical data which are skewed, it can handle large data set as well, it shows five-number summary and displays Maximum, Minimum, first quartile, third quartile, and median, and also shows outliers. Stemplot plot is used if data size is small and greater than 0.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Answer 4

Question

Chapter 1.3, Problem 70E

(a)

To determine

To find: Inter Quartile Range (IQR) for the smolt data.

(a)

Expert Solution

Answer to Problem 70E

Solution: The Inter Quartile Range (IQR) is 13.54.

Explanation of Solution

Calculation: The Inter Quartile Range (IQR) can be obtained by using the Minitab software.

Follow the steps given below:

Step 1: Enter the data in a Minitab worksheet.

Step 2: Go to Stat and select basic statistics.

Step 3: Then select Display Descriptive Statistics. Enter the name of the column containing the Reflectance data in the variables textbox.

Step 4: Then click on Statistics tab and tick mark the option against Interquartile Range and click on OK twice.

From the Minitab output the Inter Quartile Range (IQR) is 13.54.

Interpretation: The Inter Quartile Range (IQR) refers to difference between Third Quartile (Q3) and First quartile (Q1), that is, IQR=Q3−Q1. IQR indicates the spread of dataset.

(b)

To determine

To find: The outliers using 1.5×(IQR) rule.

(b)

Expert Solution

Answer to Problem 70E

Solution: There are no outliers in the provided data. Any value above 77.48 or below 23.32 would be considered outliers as they are upper whisker and lower whisker, respectively. There is no value above or below those numbers respectively.

Explanation of Solution

Calculation: To obtain the value of first and third quartile, follow the steps given below in Minitab,

Step 1: Enter the data in a Minitab worksheet.

Step 2: Go to Stat and select basic statistics.

Step 3: Then select Display Descriptive Statistics. Enter the name of the column containing the Reflectance data in the variables textbox.

Step 4: Then click on Statistics tab and tick mark the option against first quartile and third quartile and click on OK twice.

The value of Q1 is 43.63 and Q3 is 57.17 as shown in Minitab.

The formula for upper whisker is,

UW=Q3+1.5×(IQR)

Where Q1 is first quartile, Q3 is third quartile and IQR is Q3−Q1. So,

UW=Q3+1.5×(Q3−Q1)UW=57.17+1.5×(57.17−43.63)UW=77.48

The formula for lower whisker is,

LW=Q1−1.5×(IQR).

where Q1 is first, Q3 is third quartile, and IQR is Q3−Q1. So,

LW=Q1−1.5×(Q3−Q1)LW=43.63−1.5×(57.17−43.63)LW=23.32

Upper whisker of boxplot is found to be 77.48, so any values above 77.48 would be considered outliers. There is no value that is either above upper whisker or below lower whisker, so there is no outlier.

Interpretation: Outliers refers to those data points that lie either above upper whisker or below lower whisker in boxplot. From the calculations done above, it is clear that the data does not contain any outlier.

(c)

To determine

To graph: A boxplot of the provided data and describe the distribution using it.

(c)

Expert Solution

Explanation of Solution

Graph: Follow the steps given below to obtain the boxplot:

Step 1: Enter the data into a Minitab worksheet.

Step 2: Go to ‘Graph’ and click on ‘Boxplot’.

Step 3: In the dialogue box that appears select ‘Simple’ and click OK.

Step 4: Next enter the name of the column containing the data of reflectance of smolts in the filed marked as ‘Graph variables’ and click on OK.

The boxplot is obtained as shown below,

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 1

Interpretation: The boxplot is generally preferred to describe data set having unsymmetrical distribution. The boxplot shows First quartile, Median, and Third quartile. The boxplot of the data represents there are no outliers in the data.

(d)

To determine

To graph: A modified boxplot and describes the distribution using it.

(d)

Expert Solution

Explanation of Solution

Graph: Follow the steps given below to obtain the modified boxplot:

Step 1: Enter the data into a Minitab worksheet.

Step 2: Go to ‘Graph’ and click on ‘Boxplot’.

Step 3: In the dialogue box that appears select ‘Simple’ and click OK.

Step 4: Next enter the name of the column containing the data of reflectance of smolts in the filed marked as ‘Graph variables’ and click on OK.

The boxplot is obtained as shown below,

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 2

Interpretation: The modified boxplot is generally used to display data graphically when the distribution of data is unsymmetrical and skewed as it can clearly show outliers. In the above modified boxplot, there is no outlier, which indicates that the data distribution is symmetrical.

(e)

To determine

To graph: A stem plot of the provided data.

(e)

Expert Solution

Answer to Problem 70E

Solution: The stemplot of the data is shown below:

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 3

Explanation of Solution

Graph:

Follow the steps given below to obtain the stemplot:

Step 1: Enter the provided data in a Minitab worksheet.

Step 2: Go to Graph and select stem and leaves.

Step 3: Enter the name of the column containing the provided data in the Graph variables textbox and click on OK.

The obtained stem plot is displayed below,

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 4

Interpretation: The stemplot of data is generally drawn when size of data is somewhat small and all the data values are positive. The graph shows all the data values on stemplot. In the stemplot shown above there is no outliers and therefore, it indicates that the distribution of the data is symmetrical.

(f)

To determine

To find: The Boxplot, Modified boxplot, and stemplot and their advantages and disadvantages.

(f)

Expert Solution

Answer to Problem 70E

Solution: In boxplot, data is displayed based on five-number summary, which includes Minimum, Maximum, First quartile, Third Quartile, and Median. In Modified boxplot, also data is displayed based on five-number summary, but it also shows outliers. In stemplot, data values are arranged in stem consisting of all digits except right most and leaves contain final digit. Advantages of boxplots is that it is suitable for large unsymmetrical data while advantages of stemplot is that it shows all numerical value of data on graph itself. Disadvantage of Boxplot is that it is not suitable for unsymmetrical data and it does not retain exact numerical values while disadvantage of stemplot is that it is used only for positive numbers only and if data size is small.

Explanation of Solution

The comparison of Boxplot, Modified boxplot, and stemplot is shown below:

	Boxplot	Modified Boxplot	Stemplot
Description	It displays data based on five number summary, including Minimum, Maximum, First quartile, Third Quartile and Median.	It displays data based on five number summary including Minimum, Maximum, First quartile, Third Quartile and Median.	In stemplot data values are arranged in stem consisting of all digits except right most digit and leaves contain final digit
Advantages	1. It displays five number summary graphically. 2. It is suitable for unsymmetrical data. 3. It can handle large data set.	1. It displays five number summary. 2. It is suitable for unsymmetrical data which is skewed. 3. It shows outliers clearly.	1. It can display both symmetrical and unsymmetrical data graphically. 2. It can indicate outliers also. 3. It displays all numerical values of data on stemplot.
Disadvantages	1. It is not suitable for data set having symmetrical distribution. 2. It does not display outliers on graph.	1. It is not suitable for data set having symmetrical distribution.	1. It is not suitable if data size is very large. 2. It is not used for negative numbers.

Interpretation: There are various ways to display data graphically, Boxplot is suitable for unsymmetrical data which are skewed, it can handle large data set as well, it shows five-number summary and displays Maximum, Minimum, first quartile, third quartile, and median, and also shows outliers. Stemplot plot is used if data size is small and greater than 0.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Answer 5

Chapter 1.3, Problem 70E

(a)

To determine

To find: Inter Quartile Range (IQR) for the smolt data.

(a)

Expert Solution

Answer to Problem 70E

Solution: The Inter Quartile Range (IQR) is 13.54.

Explanation of Solution

Calculation: The Inter Quartile Range (IQR) can be obtained by using the Minitab software.

Follow the steps given below:

Step 1: Enter the data in a Minitab worksheet.

Step 2: Go to Stat and select basic statistics.

Step 3: Then select Display Descriptive Statistics. Enter the name of the column containing the Reflectance data in the variables textbox.

Step 4: Then click on Statistics tab and tick mark the option against Interquartile Range and click on OK twice.

From the Minitab output the Inter Quartile Range (IQR) is 13.54.

Interpretation: The Inter Quartile Range (IQR) refers to difference between Third Quartile (Q3) and First quartile (Q1), that is, IQR=Q3−Q1. IQR indicates the spread of dataset.

(b)

To determine

To find: The outliers using 1.5×(IQR) rule.

(b)

Expert Solution

Answer to Problem 70E

Solution: There are no outliers in the provided data. Any value above 77.48 or below 23.32 would be considered outliers as they are upper whisker and lower whisker, respectively. There is no value above or below those numbers respectively.

Explanation of Solution

Calculation: To obtain the value of first and third quartile, follow the steps given below in Minitab,

Step 1: Enter the data in a Minitab worksheet.

Step 2: Go to Stat and select basic statistics.

Step 3: Then select Display Descriptive Statistics. Enter the name of the column containing the Reflectance data in the variables textbox.

Step 4: Then click on Statistics tab and tick mark the option against first quartile and third quartile and click on OK twice.

The value of Q1 is 43.63 and Q3 is 57.17 as shown in Minitab.

The formula for upper whisker is,

UW=Q3+1.5×(IQR)

Where Q1 is first quartile, Q3 is third quartile and IQR is Q3−Q1. So,

UW=Q3+1.5×(Q3−Q1)UW=57.17+1.5×(57.17−43.63)UW=77.48

The formula for lower whisker is,

LW=Q1−1.5×(IQR).

where Q1 is first, Q3 is third quartile, and IQR is Q3−Q1. So,

LW=Q1−1.5×(Q3−Q1)LW=43.63−1.5×(57.17−43.63)LW=23.32

Upper whisker of boxplot is found to be 77.48, so any values above 77.48 would be considered outliers. There is no value that is either above upper whisker or below lower whisker, so there is no outlier.

Interpretation: Outliers refers to those data points that lie either above upper whisker or below lower whisker in boxplot. From the calculations done above, it is clear that the data does not contain any outlier.

(c)

To determine

To graph: A boxplot of the provided data and describe the distribution using it.

(c)

Expert Solution

Explanation of Solution

Graph: Follow the steps given below to obtain the boxplot:

Step 1: Enter the data into a Minitab worksheet.

Step 2: Go to ‘Graph’ and click on ‘Boxplot’.

Step 3: In the dialogue box that appears select ‘Simple’ and click OK.

Step 4: Next enter the name of the column containing the data of reflectance of smolts in the filed marked as ‘Graph variables’ and click on OK.

The boxplot is obtained as shown below,

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 1

Interpretation: The boxplot is generally preferred to describe data set having unsymmetrical distribution. The boxplot shows First quartile, Median, and Third quartile. The boxplot of the data represents there are no outliers in the data.

(d)

To determine

To graph: A modified boxplot and describes the distribution using it.

(d)

Expert Solution

Explanation of Solution

Graph: Follow the steps given below to obtain the modified boxplot:

Step 1: Enter the data into a Minitab worksheet.

Step 2: Go to ‘Graph’ and click on ‘Boxplot’.

Step 3: In the dialogue box that appears select ‘Simple’ and click OK.

Step 4: Next enter the name of the column containing the data of reflectance of smolts in the filed marked as ‘Graph variables’ and click on OK.

The boxplot is obtained as shown below,

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 2

Interpretation: The modified boxplot is generally used to display data graphically when the distribution of data is unsymmetrical and skewed as it can clearly show outliers. In the above modified boxplot, there is no outlier, which indicates that the data distribution is symmetrical.

(e)

To determine

To graph: A stem plot of the provided data.

(e)

Expert Solution

Answer to Problem 70E

Solution: The stemplot of the data is shown below:

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 3

Explanation of Solution

Graph:

Follow the steps given below to obtain the stemplot:

Step 1: Enter the provided data in a Minitab worksheet.

Step 2: Go to Graph and select stem and leaves.

Step 3: Enter the name of the column containing the provided data in the Graph variables textbox and click on OK.

The obtained stem plot is displayed below,

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 4

Interpretation: The stemplot of data is generally drawn when size of data is somewhat small and all the data values are positive. The graph shows all the data values on stemplot. In the stemplot shown above there is no outliers and therefore, it indicates that the distribution of the data is symmetrical.

(f)

To determine

To find: The Boxplot, Modified boxplot, and stemplot and their advantages and disadvantages.

(f)

Expert Solution

Answer to Problem 70E

Solution: In boxplot, data is displayed based on five-number summary, which includes Minimum, Maximum, First quartile, Third Quartile, and Median. In Modified boxplot, also data is displayed based on five-number summary, but it also shows outliers. In stemplot, data values are arranged in stem consisting of all digits except right most and leaves contain final digit. Advantages of boxplots is that it is suitable for large unsymmetrical data while advantages of stemplot is that it shows all numerical value of data on graph itself. Disadvantage of Boxplot is that it is not suitable for unsymmetrical data and it does not retain exact numerical values while disadvantage of stemplot is that it is used only for positive numbers only and if data size is small.

Explanation of Solution

The comparison of Boxplot, Modified boxplot, and stemplot is shown below:

	Boxplot	Modified Boxplot	Stemplot
Description	It displays data based on five number summary, including Minimum, Maximum, First quartile, Third Quartile and Median.	It displays data based on five number summary including Minimum, Maximum, First quartile, Third Quartile and Median.	In stemplot data values are arranged in stem consisting of all digits except right most digit and leaves contain final digit
Advantages	1. It displays five number summary graphically. 2. It is suitable for unsymmetrical data. 3. It can handle large data set.	1. It displays five number summary. 2. It is suitable for unsymmetrical data which is skewed. 3. It shows outliers clearly.	1. It can display both symmetrical and unsymmetrical data graphically. 2. It can indicate outliers also. 3. It displays all numerical values of data on stemplot.
Disadvantages	1. It is not suitable for data set having symmetrical distribution. 2. It does not display outliers on graph.	1. It is not suitable for data set having symmetrical distribution.	1. It is not suitable if data size is very large. 2. It is not used for negative numbers.

Interpretation: There are various ways to display data graphically, Boxplot is suitable for unsymmetrical data which are skewed, it can handle large data set as well, it shows five-number summary and displays Maximum, Minimum, first quartile, third quartile, and median, and also shows outliers. Stemplot plot is used if data size is small and greater than 0.

Answer 6

Chapter 1.3, Problem 70E

(a)

To determine

To find: Inter Quartile Range (IQR) for the smolt data.

(a)

Expert Solution

Answer to Problem 70E

Solution: The Inter Quartile Range (IQR) is 13.54.

Explanation of Solution

Calculation: The Inter Quartile Range (IQR) can be obtained by using the Minitab software.

Follow the steps given below:

Step 1: Enter the data in a Minitab worksheet.

Step 2: Go to Stat and select basic statistics.

Step 3: Then select Display Descriptive Statistics. Enter the name of the column containing the Reflectance data in the variables textbox.

Step 4: Then click on Statistics tab and tick mark the option against Interquartile Range and click on OK twice.

From the Minitab output the Inter Quartile Range (IQR) is 13.54.

Interpretation: The Inter Quartile Range (IQR) refers to difference between Third Quartile (Q3) and First quartile (Q1), that is, IQR=Q3−Q1. IQR indicates the spread of dataset.

Answer 7

Chapter 1.3, Problem 70E

(a)

To determine

To find: Inter Quartile Range (IQR) for the smolt data.

Answer 8

(a)

Expert Solution

Answer to Problem 70E

Solution: The Inter Quartile Range (IQR) is 13.54.

Answer 9

(a)

Expert Solution

Answer 10

(a)

Expert Solution

Answer 11

Expert Solution

Answer 12

Explanation of Solution

Calculation: The Inter Quartile Range (IQR) can be obtained by using the Minitab software.

Follow the steps given below:

Step 1: Enter the data in a Minitab worksheet.

Step 2: Go to Stat and select basic statistics.

Step 3: Then select Display Descriptive Statistics. Enter the name of the column containing the Reflectance data in the variables textbox.

Step 4: Then click on Statistics tab and tick mark the option against Interquartile Range and click on OK twice.

From the Minitab output the Inter Quartile Range (IQR) is 13.54.

Interpretation: The Inter Quartile Range (IQR) refers to difference between Third Quartile (Q3) and First quartile (Q1), that is, IQR=Q3−Q1. IQR indicates the spread of dataset.

Answer 13

(b)

To determine

To find: The outliers using 1.5×(IQR) rule.

(b)

Expert Solution

Answer to Problem 70E

Solution: There are no outliers in the provided data. Any value above 77.48 or below 23.32 would be considered outliers as they are upper whisker and lower whisker, respectively. There is no value above or below those numbers respectively.

Explanation of Solution

Calculation: To obtain the value of first and third quartile, follow the steps given below in Minitab,

Step 1: Enter the data in a Minitab worksheet.

Step 2: Go to Stat and select basic statistics.

Step 3: Then select Display Descriptive Statistics. Enter the name of the column containing the Reflectance data in the variables textbox.

Step 4: Then click on Statistics tab and tick mark the option against first quartile and third quartile and click on OK twice.

The value of Q1 is 43.63 and Q3 is 57.17 as shown in Minitab.

The formula for upper whisker is,

UW=Q3+1.5×(IQR)

Where Q1 is first quartile, Q3 is third quartile and IQR is Q3−Q1. So,

UW=Q3+1.5×(Q3−Q1)UW=57.17+1.5×(57.17−43.63)UW=77.48

The formula for lower whisker is,

LW=Q1−1.5×(IQR).

where Q1 is first, Q3 is third quartile, and IQR is Q3−Q1. So,

LW=Q1−1.5×(Q3−Q1)LW=43.63−1.5×(57.17−43.63)LW=23.32

Upper whisker of boxplot is found to be 77.48, so any values above 77.48 would be considered outliers. There is no value that is either above upper whisker or below lower whisker, so there is no outlier.

Interpretation: Outliers refers to those data points that lie either above upper whisker or below lower whisker in boxplot. From the calculations done above, it is clear that the data does not contain any outlier.

Answer 14

(b)

To determine

To find: The outliers using 1.5×(IQR) rule.

Answer 15

(b)

Expert Solution

Answer to Problem 70E

Solution: There are no outliers in the provided data. Any value above 77.48 or below 23.32 would be considered outliers as they are upper whisker and lower whisker, respectively. There is no value above or below those numbers respectively.

Answer 16

(b)

Expert Solution

Answer 17

(b)

Expert Solution

Answer 18

Expert Solution

Answer 19

Explanation of Solution

Calculation: To obtain the value of first and third quartile, follow the steps given below in Minitab,

Step 1: Enter the data in a Minitab worksheet.

Step 2: Go to Stat and select basic statistics.

Step 3: Then select Display Descriptive Statistics. Enter the name of the column containing the Reflectance data in the variables textbox.

Step 4: Then click on Statistics tab and tick mark the option against first quartile and third quartile and click on OK twice.

The value of Q1 is 43.63 and Q3 is 57.17 as shown in Minitab.

The formula for upper whisker is,

UW=Q3+1.5×(IQR)

Where Q1 is first quartile, Q3 is third quartile and IQR is Q3−Q1. So,

UW=Q3+1.5×(Q3−Q1)UW=57.17+1.5×(57.17−43.63)UW=77.48

The formula for lower whisker is,

LW=Q1−1.5×(IQR).

where Q1 is first, Q3 is third quartile, and IQR is Q3−Q1. So,

LW=Q1−1.5×(Q3−Q1)LW=43.63−1.5×(57.17−43.63)LW=23.32

Upper whisker of boxplot is found to be 77.48, so any values above 77.48 would be considered outliers. There is no value that is either above upper whisker or below lower whisker, so there is no outlier.

Interpretation: Outliers refers to those data points that lie either above upper whisker or below lower whisker in boxplot. From the calculations done above, it is clear that the data does not contain any outlier.

Answer 20

(c)

To determine

To graph: A boxplot of the provided data and describe the distribution using it.

(c)

Expert Solution

Explanation of Solution

Graph: Follow the steps given below to obtain the boxplot:

Step 1: Enter the data into a Minitab worksheet.

Step 2: Go to ‘Graph’ and click on ‘Boxplot’.

Step 3: In the dialogue box that appears select ‘Simple’ and click OK.

Step 4: Next enter the name of the column containing the data of reflectance of smolts in the filed marked as ‘Graph variables’ and click on OK.

The boxplot is obtained as shown below,

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 1

Interpretation: The boxplot is generally preferred to describe data set having unsymmetrical distribution. The boxplot shows First quartile, Median, and Third quartile. The boxplot of the data represents there are no outliers in the data.

Answer 21

(c)

To determine

To graph: A boxplot of the provided data and describe the distribution using it.

Answer 22

(c)

Expert Solution

Explanation of Solution

Graph: Follow the steps given below to obtain the boxplot:

Step 1: Enter the data into a Minitab worksheet.

Step 2: Go to ‘Graph’ and click on ‘Boxplot’.

Step 3: In the dialogue box that appears select ‘Simple’ and click OK.

Step 4: Next enter the name of the column containing the data of reflectance of smolts in the filed marked as ‘Graph variables’ and click on OK.

The boxplot is obtained as shown below,

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 1

Interpretation: The boxplot is generally preferred to describe data set having unsymmetrical distribution. The boxplot shows First quartile, Median, and Third quartile. The boxplot of the data represents there are no outliers in the data.

Answer 23

(c)

Expert Solution

Answer 24

(c)

Expert Solution

Answer 25

Expert Solution

Answer 26

(d)

To determine

To graph: A modified boxplot and describes the distribution using it.

(d)

Expert Solution

Explanation of Solution

Graph: Follow the steps given below to obtain the modified boxplot:

Step 1: Enter the data into a Minitab worksheet.

Step 2: Go to ‘Graph’ and click on ‘Boxplot’.

Step 3: In the dialogue box that appears select ‘Simple’ and click OK.

Step 4: Next enter the name of the column containing the data of reflectance of smolts in the filed marked as ‘Graph variables’ and click on OK.

The boxplot is obtained as shown below,

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 2

Interpretation: The modified boxplot is generally used to display data graphically when the distribution of data is unsymmetrical and skewed as it can clearly show outliers. In the above modified boxplot, there is no outlier, which indicates that the data distribution is symmetrical.

Answer 27

(d)

To determine

To graph: A modified boxplot and describes the distribution using it.

Answer 28

(d)

Expert Solution

Explanation of Solution

Graph: Follow the steps given below to obtain the modified boxplot:

Step 1: Enter the data into a Minitab worksheet.

Step 2: Go to ‘Graph’ and click on ‘Boxplot’.

Step 3: In the dialogue box that appears select ‘Simple’ and click OK.

Step 4: Next enter the name of the column containing the data of reflectance of smolts in the filed marked as ‘Graph variables’ and click on OK.

The boxplot is obtained as shown below,

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 2

Interpretation: The modified boxplot is generally used to display data graphically when the distribution of data is unsymmetrical and skewed as it can clearly show outliers. In the above modified boxplot, there is no outlier, which indicates that the data distribution is symmetrical.

Answer 29

(d)

Expert Solution

Answer 30

(d)

Expert Solution

Answer 31

Expert Solution

Answer 32

(e)

To determine

To graph: A stem plot of the provided data.

(e)

Expert Solution

Answer to Problem 70E

Solution: The stemplot of the data is shown below:

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 3

Explanation of Solution

Graph:

Follow the steps given below to obtain the stemplot:

Step 1: Enter the provided data in a Minitab worksheet.

Step 2: Go to Graph and select stem and leaves.

Step 3: Enter the name of the column containing the provided data in the Graph variables textbox and click on OK.

The obtained stem plot is displayed below,

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 4

Interpretation: The stemplot of data is generally drawn when size of data is somewhat small and all the data values are positive. The graph shows all the data values on stemplot. In the stemplot shown above there is no outliers and therefore, it indicates that the distribution of the data is symmetrical.

Answer 33

(e)

To determine

To graph: A stem plot of the provided data.

Answer 34

(e)

Expert Solution

Answer to Problem 70E

Solution: The stemplot of the data is shown below:

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 3

Answer 35

(e)

Expert Solution

Answer 36

(e)

Expert Solution

Answer 37

Expert Solution

Answer 38

Explanation of Solution

Graph:

Follow the steps given below to obtain the stemplot:

Step 1: Enter the provided data in a Minitab worksheet.

Step 2: Go to Graph and select stem and leaves.

Step 3: Enter the name of the column containing the provided data in the Graph variables textbox and click on OK.

The obtained stem plot is displayed below,

Introduction to the Practice of Statistics, Chapter 1.3, Problem 70E , additional homework tip 4

Interpretation: The stemplot of data is generally drawn when size of data is somewhat small and all the data values are positive. The graph shows all the data values on stemplot. In the stemplot shown above there is no outliers and therefore, it indicates that the distribution of the data is symmetrical.

Answer 39

(f)

To determine

To find: The Boxplot, Modified boxplot, and stemplot and their advantages and disadvantages.

(f)

Expert Solution

Answer to Problem 70E

Solution: In boxplot, data is displayed based on five-number summary, which includes Minimum, Maximum, First quartile, Third Quartile, and Median. In Modified boxplot, also data is displayed based on five-number summary, but it also shows outliers. In stemplot, data values are arranged in stem consisting of all digits except right most and leaves contain final digit. Advantages of boxplots is that it is suitable for large unsymmetrical data while advantages of stemplot is that it shows all numerical value of data on graph itself. Disadvantage of Boxplot is that it is not suitable for unsymmetrical data and it does not retain exact numerical values while disadvantage of stemplot is that it is used only for positive numbers only and if data size is small.

Explanation of Solution

The comparison of Boxplot, Modified boxplot, and stemplot is shown below:

	Boxplot	Modified Boxplot	Stemplot
Description	It displays data based on five number summary, including Minimum, Maximum, First quartile, Third Quartile and Median.	It displays data based on five number summary including Minimum, Maximum, First quartile, Third Quartile and Median.	In stemplot data values are arranged in stem consisting of all digits except right most digit and leaves contain final digit
Advantages	1. It displays five number summary graphically. 2. It is suitable for unsymmetrical data. 3. It can handle large data set.	1. It displays five number summary. 2. It is suitable for unsymmetrical data which is skewed. 3. It shows outliers clearly.	1. It can display both symmetrical and unsymmetrical data graphically. 2. It can indicate outliers also. 3. It displays all numerical values of data on stemplot.
Disadvantages	1. It is not suitable for data set having symmetrical distribution. 2. It does not display outliers on graph.	1. It is not suitable for data set having symmetrical distribution.	1. It is not suitable if data size is very large. 2. It is not used for negative numbers.

Interpretation: There are various ways to display data graphically, Boxplot is suitable for unsymmetrical data which are skewed, it can handle large data set as well, it shows five-number summary and displays Maximum, Minimum, first quartile, third quartile, and median, and also shows outliers. Stemplot plot is used if data size is small and greater than 0.

Answer 40

(f)

To determine

To find: The Boxplot, Modified boxplot, and stemplot and their advantages and disadvantages.

Answer 41

(f)

Expert Solution

Answer to Problem 70E

Solution: In boxplot, data is displayed based on five-number summary, which includes Minimum, Maximum, First quartile, Third Quartile, and Median. In Modified boxplot, also data is displayed based on five-number summary, but it also shows outliers. In stemplot, data values are arranged in stem consisting of all digits except right most and leaves contain final digit. Advantages of boxplots is that it is suitable for large unsymmetrical data while advantages of stemplot is that it shows all numerical value of data on graph itself. Disadvantage of Boxplot is that it is not suitable for unsymmetrical data and it does not retain exact numerical values while disadvantage of stemplot is that it is used only for positive numbers only and if data size is small.

Answer 42

(f)

Expert Solution

Answer 43

(f)

Expert Solution

Answer 44

Expert Solution

Answer 45

Explanation of Solution

The comparison of Boxplot, Modified boxplot, and stemplot is shown below:

	Boxplot	Modified Boxplot	Stemplot
Description	It displays data based on five number summary, including Minimum, Maximum, First quartile, Third Quartile and Median.	It displays data based on five number summary including Minimum, Maximum, First quartile, Third Quartile and Median.	In stemplot data values are arranged in stem consisting of all digits except right most digit and leaves contain final digit
Advantages	1. It displays five number summary graphically. 2. It is suitable for unsymmetrical data. 3. It can handle large data set.	1. It displays five number summary. 2. It is suitable for unsymmetrical data which is skewed. 3. It shows outliers clearly.	1. It can display both symmetrical and unsymmetrical data graphically. 2. It can indicate outliers also. 3. It displays all numerical values of data on stemplot.
Disadvantages	1. It is not suitable for data set having symmetrical distribution. 2. It does not display outliers on graph.	1. It is not suitable for data set having symmetrical distribution.	1. It is not suitable if data size is very large. 2. It is not used for negative numbers.

Interpretation: There are various ways to display data graphically, Boxplot is suitable for unsymmetrical data which are skewed, it can handle large data set as well, it shows five-number summary and displays Maximum, Minimum, first quartile, third quartile, and median, and also shows outliers. Stemplot plot is used if data size is small and greater than 0.