Whether the feedback control system is utilized by a typical microwave oven to set the cooking temperature or determine if the food is cooked or not, is to be determined. Also, a technique used for this purpose is to be stated. Any disadvantages which are there in this approach are to be mentioned. Concept introduction: A control system is a system that regulates or monitors the behavior or working of other devices/systems using control loops. It can be used to control single devices or large industrial processes. There are two types of control system which can be used to control the processes. These are feedback control system and feedforward control system. Feedback control systems consider the output of the system and then compares it with the desired value to adjust the measured value to provide accurate results whereas in feedforward control system, disturbances are taken into account beforehand and they are rectified to control it from deviating from the desired set point.

Question

Want to see the full answer?

Answer 1

Question

Chapter 1, Problem 1.4E

Interpretation Introduction

Interpretation:

Whether the feedback control system is utilized by a typical microwave oven to set the cooking temperature or determine if the food is cooked or not, is to be determined. Also, a technique used for this purpose is to be stated. Any disadvantages which are there in this approach are to be mentioned.

Concept introduction:

A control system is a system that regulates or monitors the behavior or working of other devices/systems using control loops. It can be used to control single devices or large industrial processes. There are two types of control system which can be used to control the processes. These are feedback control system and feedforward control system.

Feedback control systems consider the output of the system and then compares it with the desired value to adjust the measured value to provide accurate results whereas in feedforward control system, disturbances are taken into account beforehand and they are rectified to control it from deviating from the desired set point.

Expert Solution & Answer

Want to see the full answer?

Check out a sample textbook solution

See solution

Students have asked these similar questions

Gas "B" is being recycled and diluted. Air and gas B, which has a large molecular size, flow into a well-mixed tank of volume 15 ft³. At the outlet, a molecular sieve prevents any B from exiting the tank. At the outlet, air leaves at velocity 4 ft/s and the area is 1 ft³. Assume standard atmospheric conditions for air. Gas B enters through a cylindrical pipe with a non-uniform density p=C₁₂ r +C2 where R2 is the radius R₂ of pipe 2. Gas B enters at a 45° angle with the horizontal and with a spatially uniform (plug flow) velocity v₂ = 0.02exp(-0.01t) ft/s. At the air inlet, the velocity is 10 ft/s and the area is 0.5 ft². At the outlet, the velocity is 4 ft/s and the area is 1 ft³. Assume standard atmospheric conditions for air. (a) Determine m₂ = [p(v.n)dA, the mass flow rate of B into the tank (leave in variable form). (b) Determine the tank density as a function of time. Assume m₂ =CV2 (check sign) regardless of your answer to part (a), where CB is a constant equal to .03 slug/ft and…

The Keystone XL pipeline is a controversial proposed expansion of the currently existing Keystone pipeline, which brings heavy Canadian crude oil into the United States. Once transported, this heavy crude oil is blended with lighter American crude oil to meet the specifications of refineries, where the oil is processed into products such as gasoline. Before being transported, the heavy crude oil is blended with a diluting fluid to reduce viscosity and pumping costs. The Keystone XL pipeline was originally proposed to transport 830,000 barrels of oil (not including diluents) per day (BPD) in a 1,179-mile long, 36-inch diameter steel pipe. Take the oil to be 22° American Petroleum Institute (API) gravity (i.e., heavy crude oil) with a viscosity of 300 cSt (centistokes) after the oil has been diluted to 65% of the flow to lower the viscosity for transport. The specific gravity of the oil (SGoil) can be found via Eq. 1 below, SGil = 141.5 API +131.5 (1) Neglecting the change in density of…

heat and mass transfer