Stupid question

Questions & Advice
#1

Pretty stupid question I guess lol, but i can not for the life of me figure out how to get smithing heads/hoe heads, shovel heads and etc.

#2

Smithing tutorial:

  1. Collect iron in the mountain
  2. Makes a lot of pile of charcoal by putting clay in the adobe kiln while it’s burning the wood.
  3. Put blower/bellows to the kiln and fill it with pile of charcoal. Burn it.
  4. Using thong, put the iron in the kiln and then put it in the flat rock. Hit it with a rock or a hammer while it’s hot to make wrought iron.
  5. Put the wrought iron in the bowl, take a piece of charcoal from pile of charcoal and then put it in the same bowl. Close the bowl with plates.
  6. Repeat step 3, and then using thong, put the previous bowl to the kiln. After it cold, open the bowl and take the iron ingot from it.
  7. Use the thong and and put the iron ingot in the fire. Put it in flat rock, hit it with a rock to make hammer head. Put the hammer head in the stick to makes hammer.
  8. Burn another iron ingot and put it in a flat rock. This time , hit it with a hammer to make axe head, hit it again to make hoe head, hit it again and again to make other stuff like shovel and pickaxe. Let it cool when the desired head is found.
1 Like
#3

Tool order:
Axe (p)
Hoe
Chisel (p)
Adze (p)
Froe (p)
File (p)
Blade (p)(if saw)
Shovel
Pickaxe (p)

(p) Standing for priority tool
Full goose for file
File 2 on blade for saw
Too start vein u need fence with bucket
If u find a saw from Santa u don’t need file and chisel to make it.

If you want to start a mine , shears and knife r needed too and 2 springs 2 blades and a bomb
And torch for the bomb

Gl with smithing

1 Like
#4

Shears??

#5

Did the responses answer your question?

#6

Shears are made by combining two sharpened blades and then hitting them with a smithing hammer.

#7
  1. Use firing forge (with the bellows)
  2. Take wooden tongs to pick up metal ingot and touch to firing forge.
  3. The metal ingot will turn into hot steel ingot (orange).
  4. Put on flat rock. Put down wooden tongs.

Use a round stone on the hot steel ingot on the flat rock to get a smithing hammer head.
Take off flat rock and had short shaft to make smithing hammer.

Repeat steps 1-4

Use smithing hammer on the hot steel ingot on the flat rock to create tools.
1 hit: Axe
2 hits: Hoe
3 hits: Chisel
4 hits: Adze
5 hits: Frie
6 hits: File
7 hits: Blade Blank
8 hits: Shovel
9 hits: Mining Pick

Fandom has a one hour one life tutorial which is helpful.

1 Like