|
Complex and System Relations
I have just about pinned the tail on the donkey with this-
about ready to turn it into a table so you can look at the complexes vs.
planars vs capabilities.
There are a few complex codes that I cannot find anywhere...
If you can ID them, tell ME
submodel eq 17h
submodel eq 12h
submodel eq 2Eh
Raw data
PlanarID 0E4FEh 9595A
N, P, Q, or Y
Defsym "I_100ns_Stream_Data" = 1
Defsym "I_Data_Parity" = 1
Defsym "I_Address_Parity" = 1
Defsym "I_Sel_Fbk_Rtn" = 1
Defsym "I_Chan_Chk_Ex_Rpt" = 1
Defsym "I_Match_Memory" = 1
(Ed. Type 1 through
3 complexes are NOT supported on the 95A planar)
PlanarID 0ff6fh 8590 / 9590
M, N, P, Q, or Y
Defsym "I_100ns_Stream_Data" = 1
Defsym "I_Data_Parity" = 1
Defsym "I_Address_Parity" = 1
Defsym "I_Sel_Fbk_Rtn" = 1
Defsym "I_Chan_Chk_Ex_Rpt" = 1
Defsym "I_Match_Memory" = 1
if () {
Defsym "I_Address_Parity" = 1
Defsym "I_Sel_Fbk_Rtn" = 1
Defsym "I_Match_Memory" = 1
G, J, K, Upgrade DX-50, or Upgrade DX2-66
Defsym "I_100ns_Stream_Data" = 1
Defsym "I_Data_Parity" = 1
Defsym "I_Address_Parity" = 1
Defsym "I_Sel_Fbk_Rtn" = 1
H, or L
Defsym "I_100ns_Stream_Data" = 1
Defsym "I_Address_Parity" = 1
PlanarID 0ff9fh 8595 / 9595
M, N, P, Q, or Y
Defsym "I_100ns_Stream_Data" = 1
Defsym "I_Data_Parity" = 1
Defsym "I_Address_Parity" = 1
Defsym "I_Sel_Fbk_Rtn" = 1
Defsym "I_Chan_Chk_Ex_Rpt" = 1
Defsym "I_Match_Memory" = 1
if () {
Defsym "I_Address_Parity" = 1
Defsym "I_Sel_Fbk_Rtn" = 1
Defsym "I_Match_Memory" = 1
G, J, K, (),
Upgrade DX-50, or Upgrade DX2-66
Defsym "I_100ns_Stream_Data" = 1
Defsym "I_Data_Parity" = 1
Defsym "I_Address_Parity" = 1
Defsym "I_Sel_Fbk_Rtn" = 1
H, or L
Defsym "I_100ns_Stream_Data" = 1
Defsym "I_Address_Parity" = 1
9595 Main Page
|