Drivers
ia32v211.exe    Image/A & Image-i OS/2 Drvr (2.1x-BETA) 
iadsp211.exe     Image/a & Image-i Dsp. Sprt. (required) 
ia16v210.exe    Image/a & Image-i OS/2 16bit drivers 
iaopt211.exe     Image/a & Image-i Opt Dsk(inc new 76/77 )
iawin210.exe     Image/a & Image-i Windows 3.x drivers 
iados210.exe     Image/a & Image-i DOS AI&AutoCAD drvrs 

Image Adapter/A
Image-I Adapter/A

Not done with this yet. Some components aren't identified, as I think they are support chips. I only have so much time. I do need to add another bank of VRAM plus U2-U9.

Image-I Adapter

DL1 TDK SAD-025 J1, 2, 3 Connectors to memory expansion? J4 13W3 female connector U1-4, 13-16 HM538253J-7 2M-VRAM U5, 6, 17 HM514270AJ8  4M-DRAM U7 1888641 U8 RAMDAC HD153125Y

U11 Unk U12 59G1833 U20 Motorola 10H350 U21 Motorola 10H131 Y1 33.3300 MHz osc Y2 8.0 MHz xtal

This card was snapped up by Bob Spencer. He provided the 300dpi scan for this.

       Image Adapter/A 3-MB + 6091-Cable  MKT P/N 35G4717
       9527 Cable MKT P/N  95G9906
       9521 Cable MKT P/N 95G9907

Image Adapter/A
imageopt.exe   PS/2 Image Adapter/A options diskette, version 1.04
      The Image Adapter/A is a high-resolution adapter, capable of driving displays up to 128 MHz, with a maximum screen addressability of 1600x1200 pels. The Driver output impedance for video signals is 75 ohms. The sync. lines of the adapter are TTL levels driven by 4  ma drivers, therefore the termination should at the very least be at 750 ohms
       It contains a 32 bit 8.5 MIP display processor, a 128 MHz serializer, video palette, digital to analog converters and a CRT controller.
       Memory on the adapter comprises 1Mb of video RAM and 512Kb of instruction RAM.  A 1Mb DRAM Memory Expansion Kit is available for applications requiring additional data memory or improved performance.
       A Printer/Scanner Option (#1632) is available with the adapter allowing the direct attachment of the following devices:
o   IBM 3812 Printer Model 002 with Image Feature (#4050) or IBM 4216 Personal Pageprinter Model 020
o   IBM 3117 Scanner with extension unit (PN 6456808) or IBM 3118 Scanner or Bell & Howell 2115I (1) Scanner or equivalent
       IBM PS/2 Image Adapter/A enables both a scanner and a printer to be attached at one time via this optional printer/scanner daughter card. Use of the Printer/Scanner Option does not require an extra system unit slot.

 The Image Adapter/A is available in three versions:
   1. The Image Adapter/A 1MB is available with one megabyte of Video Memory (VRAM). It can be upgraded to three megabyte of VRAM and the Image Adapter/A Memory Expansion Kit
   2. The Image Adapter/A 3MB has two megabytes of VRAM and the Image Adapter/A Memory Expansion Kit already installed
   3. The Image Adapter/A 3MB 6091 is the same as the Image Adapter/A 3MB, but also has a cable for attaching an IBM 6019-019 Color Display

      The three versions of the Image Adapter/A support IBM analog displays equipped with a 15-pin direct-drive analog interface

      It can be installed in any IBM PS/2 MCA system unit, except portable models

 The Image-I Adapter/A is available in 3MB only and is ISO enabled

 The Image-I Adapter/A supports only ISO refresh rates. It does not support non ISO displays

The Image-I Adapter/A can coexist with the following video subsystems:
o   VGA on a PS/2 planar
o   XGA (R) chipset on a PS/2 planar
o   XGA-2 chipset on a PS/2 planar
o   XGA Display Adapter/A card
o   XGA-2 Display Adapter/A card

The IBM PS/2 Image-I Adapter/A can be installed in any Micro Channel (R) Architecture PS/2 386, 386SX, 386SLC (TM), 486SX, 486 or higher systems .Supported systems include Personal System/2 (R) Model 55 SX and SLC (TM), 56 SX, 56 SLC, 56 486SLC2, 57 SX, 57 SLC, 57 486SLC2, 65 SX, 70, 76, 77, P75, 80, 90 XP, and 95 XP; Ultimedia (R) Model M57, M77
and M57 486SLC2; and IBM Industrial Computer 7546.

 The display attached to the Image Adapter can show VGA graphics only if the adapter is installed in the AVEC slot. Ideally, the Image Adapter should be installed in the AVEC slot unless this slot is already in use (e.g. with an 8514/A Adapter)
 
 

 Various Cable P/ N

 |Display |Cable   |Cable Description
 |Type    |MKT-P/N |
 |--------+--------+----------------------------------------
 |6091-016|49G2717 |IBM SIMM cable (SIMM connector to 5BNC)
 |6091-19i|        |
 |--------+--------+----------------------------------------
 |9517    |49G2718 |IBM Connector Converter Cable
 |1091-051|        |
 |--------+--------+----------------------------------------
 |1091-051| -      |No special cable needed
 |--------+--------+----------------------------------------
 |9527    |95G9906 |IBM SIMM Cable
 |--------+--------+----------------------------------------
 |9521    |95G9907 |IBM SIMM Cable
 

 6019-019 Display Cable
   This cable is required if the Image Adapter/A or the Image-I Adapter/A is supporting an IBM Color Display 6019-019. The cable is supplied with  the Image Adapter/A 3MB 6019. The cable must be ordered separately for all others

 Image Adapter/A Options

 You can attach optional features only to the Image Adapter/A
   1. Printer/Scanner Option
   2. Memory Expansion Kit
   3. PS/2 Video Memory Expansion Option
      .
  For a single display configuration, you must always attach the display to the display connector on the Image Adapter/A and not to the system- unit display connector

 Image Adapter/A 15-pin Analog Video Connector

Pin	Color Mode	Monochr. Mode
1	Red Video	Reserved
2	Green Video	Video
3	Blue Video	Reserved
4	Display ID 2	Display ID 2
5	Self-Test	Self-Test
6	Red Ground	Reserved
7	Green Ground	Video Ground
8	Blue Ground	Reserved
9	+12V fused	+12V fused
10	Digital Ground	Digital Ground
11	Display ID 0	Display ID 0
12	Display ID 1	Display ID 1
13	External Hsync	External Hsync
14	External Vsync	External Vsync
15	Display ID 3	Display ID 3

 Image-I Adapter/A SIM-Video Connector