# Invocation command line:
# /home/qlogic/huiyu/mpi2007/bin/runspec --define hosts=/home/qlogic/huiyu/mpi2007/hosts --ranks=256 --extension=infinipath --reportable --action validate -I -c qlogic-amd64-pathscale-infinipath -i mref -n 3 -T base -o asc medium -o asc,cfg,csv,txt
# output_root was not used for this run
############################################################################
#####################################################################
# This is a sample config file. It was tested with:
#
#   Compiler name/version:    QLogic PathScale compilers version 3.0
#   Communications software:  QLogic InfiniPath software stack
#                              versions 2.0 and 2.1
#   Operating system version: SLES 10 (x86-64)
#   Node Hardware:            AMD Opteron and Intel Xeon x64 servers
#   Interconnect adapters:    QLogic InfiniPath InfiniBand
#                             (PCI Express and HTX) adapters
#
# If your platform uses different versions, different
# hardware or operates in a different mode (for
# example, 32- vs. 64-bit mode), there is the possibility
# that this configuration file may not work as-is.
#
# Note that issues with compilation should be directed
# to the compiler vendor. Information about SPEC techncial
# support can be found in the techsupport document in the
# Docs directory of your benchmark installation.
#
# Also note that this is a sample configuration. It
# is expected to work for the environment in which
# it was tested; it is not guaranteed that this is
# the config file that will provide the best performance.
#
# Note that you might find a more recent config file for
# your platform with the posted results at
# www.spec.org/mpi2007
#####################################################################
#  A runspec line something like the following will supply
#  the information needed in the submit command below:
#  runspec --config qlogic-linux-x86_64-pathscale-infinipath  \
#     --define hosts=$SPEC/hostfile --ranks=24
#
#  A flags file such as the following can be downloaded from
# http://www.spec.org/mpi2007/flags/ and put in your top-level
# $SPEC directory and then uncomment this line:
flagsurl000=http://www.spec.org/mpi2007/flags/MPI2007_flags.20070717.01.xml
######################################################################

makeflags		= -j 4
env_vars		= yes
use_submit_for_speed	= yes
ext			= infinipath
teeout        = yes
teerunout     = yes
mean_anyway             = yes

MPI_HOME		= /usr
CC			= $(MPI_HOME)/bin/mpicc  -cc=pathcc -march=opteron
FC			= $(MPI_HOME)/bin/mpif90 -f90=pathf90 -march=opteron
CXX			= $(MPI_HOME)/bin/mpicxx -CC=pathCC -march=opteron

ACML_DIR = /net/files/tools/acml/x86_64/acml3.5.0/pathscale64/lib

submit = $[MPI_HOME]/bin/mpirun -m %{hosts} -np $ranks -disable-mpi-progress-check $command

EXTRA_LDFLAGS     = -IPA:max_jobs=4

#####################################################################
#  Portability
#####################################################################

default:
EXTRA_CPORTABILITY= -DSPEC_MPI_LP64

115.fds4:
CPORTABILITY      = -DSPEC_MPI_LC_TRAILING_DOUBLE_UNDERSCORE

121.pop2:
CPORTABILITY      = -DSPEC_MPI_DOUBLE_UNDERSCORE

127.wrf2:
CPORTABILITY      = -DF2CSTYLE -DSPEC_MPI_DOUBLE_UNDERSCORE \
                    -DSPEC_MPI_LINUX

130.socorro:
FPORTABILITY      = -fno-second-underscore

#################################################################
#          Optimization flags and Notes
#################################################################

default=base:
COPTIMIZE	  = -Ofast -OPT:malloc_alg=1
FOPTIMIZE	  = -O3 -OPT:Ofast -OPT:malloc_alg=1 -LANG:copyinout=off
license_num = 0018
prepared_by = QLogic
system_vendor = AMD, QLogic Corporation, Rackable Systems, IWILL
node_fileserver_sw_state = Multi-User
node_fileserver_sw_sharedfile = NFS
node_fileserver_sw_other = Sun Grid Engine 6.0
node_fileserver_sw_localfile = Linux ext3
node_fileserver_purpose = file server, other
node_fileserver_order = 2
node_fileserver_label = Headnode NFS filesystem
node_fileserver_hw_vendor = Tyan
node_fileserver_hw_tcache = None
node_fileserver_hw_scache = 1 MB I+D on chip per core
node_fileserver_hw_pcache = 64 KB I + 64 KB D on chip per core
node_fileserver_hw_other = None
node_fileserver_hw_ocache = None
node_fileserver_hw_nthreadspercore = 1
node_fileserver_hw_ncpuorder = 1-4 chips
node_fileserver_hw_ncoresperchip = 2
node_fileserver_hw_ncores = 8
node_fileserver_hw_nchips = 4
node_fileserver_hw_model = Thunder K8QSD Pro (S4882) motherboard
node_fileserver_hw_memory = 16 GB (16 x 1 GB DDR400 dimms)
node_fileserver_hw_cpu_name = AMD Opteron 885
node_fileserver_hw_cpu_mhz = 2600
node_fileserver_hw_adapter_ge_slot_type = integrated on motherboard
node_fileserver_hw_adapter_ge_ports_used = 2
node_fileserver_hw_adapter_ge_model = Broadcom BCM5704C
node_fileserver_hw_adapter_ge_interconnect = Ethernet
node_fileserver_hw_adapter_ge_firmware = None
node_fileserver_hw_adapter_ge_driver = Part of Linux kernel modules
node_fileserver_hw_adapter_ge_data_rate = 1 Gbps Ethernet
node_fileserver_hw_adapter_ge_count = 2
node_fileserver_hw_adapter = Gigabit Ethernet
node_fileserver_count = 1
node_compute_sw_state = Multi-User
node_compute_sw_sharedfile = NFS
node_compute_sw_other = Sun Grid Engine 6.0
node_compute_sw_localfile = Linux ext3
node_compute_purpose = compute, head
node_compute_order = 1
node_compute_label = Rackable, IWILL, AMD
node_compute_hw_vendor = Rackable Systems, IWILL, AMD
node_compute_hw_tcache = None
node_compute_hw_scache = 1 MB I+D on chip per core
node_compute_hw_pcache = 64 KB I + 64 KB D on chip per core
node_compute_hw_ocache = None
node_compute_hw_nthreadspercore = 1
node_compute_hw_ncpuorder = 1-2 chips
node_compute_hw_ncoresperchip = 2
node_compute_hw_ncores = 4
node_compute_hw_nchips = 2
node_compute_hw_memory = 8 GB (8 x 1 GB DDR400)
node_compute_hw_disk = 250 GB, SATA
node_compute_hw_cpu_name = AMD Opteron 290
node_compute_hw_cpu_mhz = 2800
node_compute_hw_adapter_ib_slot_type = HTX
node_compute_hw_adapter_ib_ports_used = 1
node_compute_hw_adapter_ib_model = QLogic InfiniPath QHT7140
node_compute_hw_adapter_ib_interconnect = InfiniBand
node_compute_hw_adapter_ib_firmware = None
node_compute_hw_adapter_ib_driver = InfiniPath 2.1
node_compute_hw_adapter_ib_data_rate = InfiniBand 4x SDR
node_compute_hw_adapter_ib_count = 1
node_compute_hw_adapter_1g_slot_type = integrated on motherboard
node_compute_hw_adapter_1g_ports_used = 1
node_compute_hw_adapter_1g_model = Intel 82541PI Gigabit Ethernet controller
node_compute_hw_adapter_1g_interconnect = Ethernet
node_compute_hw_adapter_1g_firmware = None
node_compute_hw_adapter_1g_driver = Part of Linux kernel modules
node_compute_hw_adapter_1g_data_rate = 1 Gbps Ethernet
node_compute_hw_adapter_1g_count = 1
node_compute_count = 64
interconnect_ib_purpose = MPI traffic
interconnect_ib_order = 1
interconnect_ib_label = QLogic InfiniBand HCAs and switches
interconnect_ib_hw_vendor = QLogic
interconnect_ib_hw_topo = Single switch (star)
interconnect_ib_hw_switch_9120_ports = 144
interconnect_ib_hw_switch_9120_model = QLogic SilverStorm 9120 Fabric Director
interconnect_ib_hw_switch_9120_firmware = 3.4.0.5.2
interconnect_ib_hw_switch_9120_data_rate = InfiniBand 4x SDR and InfiniBand 4x DDR
interconnect_ib_hw_switch_9120_count = 1
interconnect_ib_hw_model = InfiniPath and Silverstorm
interconnect_fs_purpose = file system traffic
interconnect_fs_order = 2
interconnect_fs_label = Broadcom NICs, Force10 switches
interconnect_fs_hw_vendor = Force10
interconnect_fs_hw_topo = Single switch (star)
interconnect_fs_hw_switch_E300_ports = 288
interconnect_fs_hw_switch_E300_model = Force10 E300 Gig-E switch
interconnect_fs_hw_switch_E300_firmware = N/A
interconnect_fs_hw_switch_E300_data_rate = 1 Gbps Ethernet
interconnect_fs_hw_switch_E300_count = 1
interconnect_fs_hw_model = E300
sw_auto_parallel = No
sw_avail = Jul-2007
CXXOPTIMIZE	  = -O3 -OPT:Ofast -CG:local_fwd_sched=on
sw_other = None
sw_base_ptrsize   = 64-bit
sw_peak_ptrsize   = 64-bit
test_date = May-2007
test_sponsor = QLogic Corporation
tester = QLogic Performance Engineering
sw_preprocessors = No
sw_mpi_other = None
sw_mpi_library = QLogic InfiniPath MPI 2.1
sw_f_compiler = QLogic PathScale Fortran Compiler 3.0
sw_cxx_compiler = QLogic PathScale C++ Compiler 3.0
sw_c_compiler = QLogic PathScale C Compiler 3.0

104.milc=peak:
basepeak=true

107.leslie3d=peak:
FOPTIMIZE         = -O3 -OPT:Ofast -CG:cflow=0 -INLINE:=aggressive=on

113.GemsFDTD=peak:
basepeak=true

115.fds4=peak:
basepeak=true

121.pop2=peak:
basepeak=true

122.tachyon=peak:
COPTIMIZE         = -Ofast -INLINE:=aggressive=on -OPT:unroll_size=256

126.lammps=peak:
CXXOPTIMIZE       = -Ofast -CG:local_fwd_sched=on

127.wrf2=peak:
basepeak=true

129.tera_tf=peak:
FOPTIMIZE         = -O3 -OPT:Ofast -OPT:malloc_alg=1 -OPT:unroll_size=256

130.socorro=peak=default=default:
COPTIMIZE	  = -Ofast -OPT:malloc_alg=1
FOPTIMIZE	  = -O3 -OPT:Ofast -OPT:malloc_alg=1 -LANG:copyinout=off
RM_SOURCES        = specblas.F90 specbessel.c
EXTRA_LIBS        = -L$(ACML_DIR) -lacml

132.zeusmp2=peak:
basepeak=true

137.lu=peak:
basepeak=true

# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
hw_avail = Nov-2006
node_compute_hw_model000 = Rackable Systems C1000 chassis, IWILL DK8-HTX
node_compute_hw_model001 = motherboard
node_compute_hw_other000 = Nodes custom-built by Rackable Systems.  The
node_compute_hw_other001 = Rackable C1000 chassis is half-depth with 450W,
node_compute_hw_other002 = 48 VDC Power Supply. Integrated Gigabit Ethernet
node_compute_hw_other003 = for admin/filesystem.
node_compute_sw_os000 = ClusterCorp Rocks 4.2.1
node_compute_sw_os001 = (Based on RedHat Enterprise Linux 4.0 Update 4)
node_fileserver_hw_disk000 = 250 GB, SATA, 7200 RPM
node_fileserver_sw_os000 = ClusterCorp Rocks 4.2.1
node_fileserver_sw_os001 = (Based on RedHat Enterprise Linux 4.0 Update 4)
system_class = Homogenous
system_name000 = AMD Emerald Cluster: AMD Opteron CPUs,
system_name001 = QLogic InfiniPath/SilverStorm Interconnect
node_fileserver_notes_000 ="other" purposes of this node: login, compile, job submission
node_fileserver_notes_005 =and queuing.
node_fileserver_notes_010 =This node assembled with a 2U chassis and 700 watt ATX 12V Power Supply.
interconnect_ib_notes_000 =The data rate between InifniPath HCAs and SilverStorm switches
interconnect_ib_notes_005 =is SDR. However, DDR is used for inter-switch links.