HPC2002 Result Copyright © 1999-2002 Standard Performance Evaluation Corporation |
Hewlett-Packard Company hp server rx2600 cluster (1500MHz Itanium2) |
|
SPEC license # HPG2116 | Tested by: Hewlett-Packard Company | Test site: Richardson, Texas | Test date: Nov-2003 | Hardware Avail: Oct-2003 | Software Avail: Oct-2003 |
Benchmark | Reference Time |
Runtime | Ratio | |
---|---|---|---|---|
371.gamess_m | 86400 | 1575 | 54.8 | |
SPECchemM2002 | 54.8 |
|
|
Notes / Tuning Information |
---|
CPU(s) enabled: 64 (two per node, 32 nodes) Other Hardware: Computation Network: Myrinet M3-E64 Switch Enclosure (Fiber) Myrinet M3-SW16-8F 8-Port Line Card (8) HP A6386 PCI HyperFabric2 Adapter GigaBit on-board adapter for Administration and NFS PCI GigaBit card for NFS traffic (GigE-TX adapter A6825A ) NFS file server: rp5470 (PA-RISC) NFS File Server 4 PA8700 CPUs 750 MHz. 16 GB of memory 4 internal disks 73 GB Ultra2 SCSI 20 external disks 18 GB U160 SCSI striped with LVM across 4 SCSI controllers 15 external disks 73 GB FibreChannel mirrored with LVM across 2 FC controllers which contain the NFS filesystems accessed by the benchmark. These NFS filesystems are optimized for security rather than performance. File Server Network: HP ProCurve 9308 64-port copper Gigabit Ethernet Switch Built-in Gigabit Ethernet Adapters (one per node) Peak Flags: MPI mpif90 +Ofast +Onodataprefetch $(DAFLAG) +Onolimit mpicc +Ofast +Onodataprefetch -DNOUNDERSCORE $(DAFLAG) +Onolimit OPTIMIZE = -I /opt/mpi/include DAFLAG = +DD64 +i8 +r8 CPPFLAGS = -I. -C -P EXTRA_LIBS= +U77 $(DAFLAG) +FPD -minshared MPILIB=/opt/mpi/lib/hpux64 Alternate Source used for Peak: None Kernel Paramters (/stand/system): maxdsiz 0x7b03a000 maxdsiz_64bit 0x4000000000 maxssiz 0x10000000 maxssiz_64bit 0x40000000 maxtsiz 1073741824 maxtsiz_64bit 4294967296 vps_pagesize 4 vps_ceiling 64 dbc_min_pct 3 dbc_max_pct 3 Peak User Environment: use_submit_for_speed=1 submit = /home/f90pack/clust_mpirungames $command clust_mpirungames: mpirun -f appfile appfile: -h rx17 -np 2 -e MPI_WORKDIR=$cwd $command ... -h rx48 -np 2 -e MPI_WORKDIR=$cwd $command environment variables in .cshrc setenv MPI_ENABLED ENABLED setenv IRCDATA ./gamess_us.irc setenv INPUT ./gamess_us.F05 setenv PUNCH ./gamess_us.dat setenv INTGRLS ./gamess_us.F08 setenv AOINTS ./gamess_us.F08 setenv MOINTS ./gamess_us.F09 setenv DICTNRY ./gamess_us.F10 setenv DRTFILE ./gamess_us.F11 setenv CIVECTR ./gamess_us.F12 setenv NTNFMLA ./gamess_us.F13 setenv CIINTS ./gamess_us.F14 setenv WORK15 ./gamess_us.F15 setenv WORK16 ./gamess_us.F16 setenv CSFSAVE ./gamess_us.F17 setenv FOCKDER ./gamess_us.F18 setenv DASORT ./gamess_us.F20 setenv JKFILE ./gamess_us.F23 setenv ORDINT ./gamess_us.F24 setenv EFPIND ./gamess_us.F25 |
First published at SPEC.org on 21-Jan-2004
Generated on Thu Jan 22 00:59:50 2004 by SPEC HPC2002 HTML formatter v1.01