# Invocation command line: # /home/cpu2017/bin/harness/runcpu --configfile amd_speed_aocc400_znver4_A1.cfg --tune all --reportable --iterations 3 --nopower --runmode speed --tune base:peak --size test:train:refspeed intspeed # output_root was not used for this run ############################################################################ ################################################################################ # AMD AOCC 400 SPEC CPU 2017 V1.1.9 Speed Configuration File for 64-bit Linux # # File name : amd_speed_aocc400_znver4_A1.cfg # Creation Date : April 16, 2023 # CPU 2017 Version : 1.1.9 # Supported benchmarks : All Speed benchmarks (intspeed, fpspeed) # Compiler name/version : AOCC 4.0.0 # Operating system version : RHEL 8.6 # Supported OS's : Ubuntu 22.04, RHEL 8.6/9, SLE 15 SP4 # Hardware : AMD znver4 (AMD64) # FP Base Pointer Size : 64-bit # FP Peak Pointer Size : 64-bit # INT Base Pointer Size : 64-bit # INT Peak Pointer Size : 64-bit # Auto Parallelization : No # # Note: DO NOT EDIT THIS FILE, the only edits required to properly run these # binaries are made in the ini Python file. Please consult Readme.amd_speed_aocc400_znver4_A1.txt # for a few uncommon exceptions which require edits to this file. # # Description: # # This binary package automates away many of the complexities necessary to set # up and run SPEC CPU 2017 under optimized conditions on AMD znver4-based # server platforms within Linux (AMD64). # # The binary package was built specifically for AMD znver4 microprocessors and # is not intended to run on other products. # # Please install the binary package by following the instructions in # "Readme.amd_speed_aocc400_znver4_A1.txt" under the "How To Use the Binaries" section. # # The binary package is designed to work without alteration on one socket AMD # znver4-based servers with 96 cores, SMT enabled and 768 (64x12) GB of DDR5 # memory distributed evenly among all 12 channels using 64 GiB DIMMs. # # To run the binary package on other znver4 configurations, please review # "Readme.amd_speed_aocc400_znver4_A1.txt". In general, znver4 CPUs # should be autodetected with no action required by the user. # # In most cases, it should be unnecessary to edit "amd_speed_aocc400_znver4_A1.cfg" or any # other file besides "ini_amd_speed_aocc400_znver4_A1.py" where reporting fields # and run conditions are set. # # The run script automatically sets the optimal number of speed copies and binds # them appropriately. # # The run script and accompanying binary package are designed to work on Ubuntu # 22.04, RHEL 8.6/9, and SLE 15 SP4. # # Important! If you write your own run script, please set the stack size to # "unlimited" when executing this binary package. Failure to do so may cause # some benchmarks to overflow the stack. For example, to set stack size within # the bash shell, include the following line somewhere at the top of your run # script before the runcpu invocation: # # ulimit -s unlimited # # Modification of this config file should only be necessary if you intend to # rebuild the binaries. General instructions for rebuilding the binaries are # found in-line below. # ################################################################################ # Modifiable macros: ################################################################################ # "allow_build"" switch: # Change the following line to true if you intend to REBUILD the binaries (AMD # does not support this). Valid values are "true" or "false" (no quotes). %define allow_build false # Only change these macros if you are rebuilding the binary package: %define compiler_name aocc400 %define binary_package_name amd_speed_%{compiler_name}_znver4_A %define binary_package_ext %{binary_package_name} %define binary_package_revision 1 %define build_path ${SPEC} %define flags_file_name %{compiler_name}-flags.xml # Do NOT change build_lib_dir after the build or it will trigger a # rebuild of the xalanc. It should also remain literal: %define build_lib_dir amd_speed_aocc400_znver4_A_lib # To enable the platform file, be sure to uncomment the flagsurl02 header line # below in the Header settings. %define platform_file_name INVALID_platform_%{binary_package_name}.xml ################################################################################ # You should never have to change binary_package_full_name: %define binary_package_full_name %{binary_package_name}%{binary_package_revision} ################################################################################ # Include file name ################################################################################ # The include file contains fields that are commonly changed. This file is auto- # generated based upon INI file settings and should not need user modification # for runs. %define inc_file_name %{binary_package_full_name}.inc %define flags_inc_file_name %{binary_package_full_name}_flags.inc # Binary label extension: # Only modify the binary label extension if you plan to rebuild the binaries. # If you plan to recompile these CPU 2017 binaries, please choose a new extension # name below to avoid confusion with the current binary set on your system # under test, and to avoid confusion for SPEC submission reviewers. You will # also need to set "allow_build" to true above. Finally, you must modify the # Paths section below to point to your library locations if the paths are not # already set up in your build environment. # Note that AMD calls an external script to set up the compiler and library # paths before initiating the build. %define ext %{binary_package_ext} ################################################################################ # Paths and Environment Variables # ** MODIFY AS NEEDED (modification should not be necessary for runs) ** ################################################################################ # Allow environment variables to be set before runs: preenv = 1 # retain:true is necessary to avoid gcc out-of-memory exceptions on certain SUTs: # oversize_threshold is required to support jemalloc 5.2.x+ preENV_MALLOC_CONF = oversize_threshold:0,retain:true preENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 0 # OpenMP environment variables: preENV_OMP_SCHEDULE = static preENV_OMP_DYNAMIC = false preENV_OMP_STACKSIZE = 128M # Define the name of the directory that holds AMD library files: %define lib_dir %{binary_package_name}_lib # Set the shared object library path for runs and builds: preENV_LD_LIBRARY_PATH = $[top]/%{lib_dir}/lib:%{ENV_LD_LIBRARY_PATH} %if '%{allow_build}' eq 'false' # The include file is only needed for runs, but not for builds. # include: %{inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_znver4_A1.inc' ############################################################################ ################################################################################ ################################################################################ # File name: amd_speed_aocc400_znver4_A1.inc # File generation code date: October 11, 2022 # File generation date/time: August 12, 2024 / 06:47:53 # # This file is automatically generated during a SPEC CPU2017 run. # # To modify inc file generation, please consult the readme file or the run # script. ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The following macros are generated for use in the cfg file. ################################################################################ ################################################################################ %define logical_core_count 256 %define physical_core_count 256 %define physical_core_max 255 %define logical_core_max 255 ################################################################################ ################################################################################ # The following inc blocks set the speed thread counts and affinity settings. # # intspeed benchmarks: 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s, # 623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s, # 657.xz_s # fpspeed benchmarks: 603.bwaves_s,607.cactuBSSN_s,619.lbm_s,621.wrf_s, # 627.cam4_s,628.pop2_s,638.imagick_s,644.nab_s,649.fotonik3d_s, # 654.roms_s # # Selected thread counts from '9754' section of CPU info ################################################################################ # default preENV thread settings: default: preENV_OMP_THREAD_LIMIT = 256 preENV_GOMP_CPU_AFFINITY = 0-255 ################################################################################ ################################################################################ # intspeed base thread counts: intspeed=base: threads = 256 ENV_GOMP_CPU_AFFINITY = 0-255 bind0 = numactl --physcpubind=0-255 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # fpspeed base thread counts: fpspeed=base: threads = 256 ENV_GOMP_CPU_AFFINITY = 0-255 bind0 = numactl --physcpubind=0-255 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 1 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s,623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s=peak: threads = 1 ENV_GOMP_CPU_AFFINITY = 15 bind0 = numactl --physcpubind=15 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 256 603.bwaves_s,619.lbm_s,621.wrf_s,628.pop2_s,649.fotonik3d_s=peak: threads = 256 ENV_GOMP_CPU_AFFINITY = 0-255 bind0 = numactl --physcpubind=0-255 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 256 607.cactuBSSN_s,627.cam4_s,638.imagick_s,644.nab_s,657.xz_s=peak: threads = 256 ENV_GOMP_CPU_AFFINITY = 0-255 bind0 = numactl --physcpubind=0-255 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 256 654.roms_s=peak: threads = 256 ENV_GOMP_CPU_AFFINITY = 0 128 1 129 2 130 3 131 4 132 5 133 6 134 7 135 8 136 9 137 10 138 11 139 12 140 13 141 14 142 15 143 16 144 17 145 18 146 19 147 20 148 21 149 22 150 23 151 24 152 25 153 26 154 27 155 28 156 29 157 30 158 31 159 32 160 33 161 34 162 35 163 36 164 37 165 38 166 39 167 40 168 41 169 42 170 43 171 44 172 45 173 46 174 47 175 48 176 49 177 50 178 51 179 52 180 53 181 54 182 55 183 56 184 57 185 58 186 59 187 60 188 61 189 62 190 63 191 64 192 65 193 66 194 67 195 68 196 69 197 70 198 71 199 72 200 73 201 74 202 75 203 76 204 77 205 78 206 79 207 80 208 81 209 82 210 83 211 84 212 85 213 86 214 87 215 88 216 89 217 90 218 91 219 92 220 93 221 94 222 95 223 96 224 97 225 98 226 99 227 100 228 101 229 102 230 103 231 104 232 105 233 106 234 107 235 108 236 109 237 110 238 111 239 112 240 113 241 114 242 115 243 116 244 117 245 118 246 119 247 120 248 121 249 122 250 123 251 124 252 125 253 126 254 127 255 bind0 = numactl --physcpubind=0-255 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ ################################################################################ # Switch back to default: default: ################################################################################ ################################################################################ ################################################################################ # The remainder of this file defines CPU2017 report parameters. ################################################################################ ################################################################################ ################################################################################ # SPEC CPU 2017 report header ################################################################################ license_num =9019 tester =Cisco Systems test_sponsor =Cisco Systems hw_vendor =Cisco Systems hw_model000 =Cisco UCS C245 M8 (AMD EPYC 9754 128 -Core hw_model001 =Processor) #--------- If you install new compilers, edit this section -------------------- sw_compiler =C/C++/Fortran: Version 4.0.0 of AOCC ################################################################################ ################################################################################ # Hardware, firmware and software information ################################################################################ hw_avail =Jun-2024 sw_avail =Jun-2023 hw_cpu_name =AMD EPYC 9754 hw_cpu_nominal_mhz =2250 hw_cpu_max_mhz =3100 hw_ncores =256 hw_nthreadspercore =1 hw_ncpuorder =1,2 chips hw_other =CPU Cooling: Air fw_bios =Version 4.3.4a released May-2024 sw_base_ptrsize =64-bit hw_pcache =32 KB I + 32 KB D on chip per core hw_scache =1 MB I+D on chip per core hw_tcache000 =256 MB I+D on chip per chip, 16 MB shared / 8 hw_tcache001 = cores hw_ocache =None sw_other =None ################################################################################ # Notes ################################################################################ # Enter notes_000 through notes_100 here. notes_000 =Binaries were compiled on a system with 2x AMD EPYC 9174F CPU + 1.5TiB Memory using RHEL 8.6 notes_005 = notes_010 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_015 =is mitigated in the system as tested and documented. notes_020 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_025 =is mitigated in the system as tested and documented. notes_030 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_035 =is mitigated in the system as tested and documented. notes_040 = notes_submit_000 ='numactl' was used to bind copies to the cores. notes_submit_005 =See the configuration file for details. notes_submit_010 = notes_os_000 ='ulimit -s unlimited' was used to set environment stack size limit notes_os_005 ='ulimit -l 2097152' was used to set environment locked pages in memory limit notes_os_010 = notes_os_015 =runcpu command invoked through numactl i.e.: notes_os_020 =numactl --interleave=all runcpu notes_os_025 = notes_os_030 =To limit dirty cache to 8% of memory, 'sysctl -w vm.dirty_ratio=8' run as root. notes_os_035 =To limit swap usage to minimum necessary, 'sysctl -w vm.swappiness=1' run as root. notes_os_040 =To free node-local memory and avoid remote memory usage, notes_os_045 ='sysctl -w vm.zone_reclaim_mode=1' run as root. notes_os_050 =To clear filesystem caches, 'sync; sysctl -w vm.drop_caches=3' run as root. notes_os_055 =To disable address space layout randomization (ASLR) to reduce run-to-run notes_os_060 =variability, 'sysctl -w kernel.randomize_va_space=0' run as root. notes_os_065 = notes_os_thp_000 =To enable Transparent Hugepages (THP) for all allocations, notes_os_thp_005 ='echo always > /sys/kernel/mm/transparent_hugepage/enabled' and notes_os_thp_010 ='echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root. notes_comp_000 =The AMD64 AOCC Compiler Suite is available at notes_comp_005 =http://developer.amd.com/amd-aocc/ notes_comp_010 = # notes_jemalloc_000 =jemalloc: configured and built with GCC v4.8.2 in RHEL 7.4 (No options specified) # notes_jemalloc_005 =jemalloc 5.1.0 is available here: # notes_jemalloc_010 =https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2 # notes_jemalloc_015 = # sw_other000 =jemalloc: jemalloc memory allocator library v5.1.0 ################################################################################ # The following note fields describe platorm settings. ################################################################################ # example: (edit and uncomment as necessary) # notes_plat_000 =BIOS settings: # notes_plat_002 = TDP: 400 # notes_plat_004 = Determinism Slider set to Power # notes_plat_006 = PPT: 400 # notes_plat_010 = NPS: 4 # notes_plat_011 = Workload Profile = CPU Intensive # notes_plat_012 = TSME = Disabled # notes_plat_014 = SEV Control = Disabled # notes_plat_015 = Fan Speed: Maximum ################################################################################ # The following are custom fields: ################################################################################ # Use custom_fields to enter lines that are not listed here. For example: # notes_plat_100 = Energy Bias set to Max Performance # new_field = Ambient temperature set to 10C ################################################################################ # The following fields must be set here for only Int benchmarks. ################################################################################ intspeed: sw_peak_ptrsize =64-bit notes_os_thp_015 = ################################################################################ # The following fields must be set here for FP benchmarks. ################################################################################ fpspeed: sw_peak_ptrsize =64-bit notes_os_thp_003 =To always enable THP for peak runs of: notes_os_thp_004 =603.bwaves_s, 607.cactuBSSN_s, 619.lbm_s, 627.cam4_s, 628.pop2_s, 638.imagick_s, 644.nab_s, 649.fotonik3d_s: notes_os_thp_005 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_006 =run as root. notes_os_thp_007 =To disable THP for peak runs of 621.wrf_s: notes_os_thp_008 ='echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_009 =run as root. notes_os_thp_010 =To enable THP only on request for peak runs of 654.roms_s: notes_os_thp_011 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_012 =run as root. ################################################################################ # The following fields must be set here or they will be overwritten by sysinfo. ################################################################################ intspeed,fpspeed: hw_disk =1 x 1.6 TB NVME SSD hw_memory000 =1536 GB (24 x 64 GB 2Rx4 PC5-5600B-R, hw_memory001 =running at 4800) hw_memory002 = hw_nchips =2 prepared_by =Cisco Systems sw_file =btrfs sw_os000 =SUSE Linux Enterprise Server 15 SP5 sw_os001 =kernel version # ex: Kernel 4.4.0-87-generic sw_state =Run level 3 (multi-user) ################################################################################ # End of inc file ################################################################################ # Switch back to the default block after the include file: default: # ---- End inclusion of '/home/cpu2017/config/amd_speed_aocc400_znver4_A1.inc' # Switch back to default block after the include file: default: fail_build = 1 %elif '%{allow_build}' eq 'true' # If you intend to rebuild, be sure to set the library paths either in the # build script or here: preENV_LIBRARY_PATH = $[top]/%{build_lib_dir}/lib:%{ENV_LIBRARY_PATH} % define build_ncpus 16 # controls number of simultaneous compiles fail_build = 0 makeflags = --jobs=%{build_ncpus} --load-average=%{build_ncpus} %else % error The value of "allow_build" is %{allow_build}, but it can only be "true" or "false". This error was generated %endif ################################################################################ # Enable automated data collection per benchmark ################################################################################ # Data collection is not enabled for reportable runs. # teeout is necessary to get data collection stdout into the logs. Best # practices for the individual data collection items would be to have # them store important output in separate files. Filenames could be # constructed from $SPEC (environment), $lognum (result number from runcpu), # and benchmark name/number. teeout = yes # Run runcpu with '-v 35' (or greater) to log lists of variables which can # be used in substitutions as below. # For CPU2006, change $label to $ext %define data-collection-parameters benchname='$name' benchnum='$num' benchmark='$benchmark' iteration=$iter size='$size' tune='$tune' label='$label' log='$log' lognum='$lognum' from_runcpu='$from_runcpu' %define data-collection-start $[top]/data-collection/data-collection start %{data-collection-parameters} %define data-collection-stop $[top]/data-collection/data-collection stop %{data-collection-parameters} monitor_specrun_wrapper = %{data-collection-start} ; $command ; %{data-collection-stop} ################################################################################ # Header settings ################################################################################ backup_config = 0 # set to 0 if you do not want backup files bench_post_setup = sync # command_add_redirect: If set, the generated ${command} will include # redirection operators (stdout, stderr), which are passed along to the shell # that executes the command. If this variable is not set, specinvoke does the # redirection. command_add_redirect = yes env_vars = yes flagsurl000 = http://www.spec.org/cpu2017/flags/aocc400-flags.xml flagsurl001 = http://www.spec.org/cpu2017/flags/Cisco-Platform-Settings-AMD-v3-revA.xml #flagsurl02 = $[top]/%{platform_file_name} # label: User defined extension string that tags your binaries & directories: label = %{ext} line_width = 1020 log_line_width = 1020 mean_anyway = yes output_format = all reportable = yes size = test,train,ref teeout = yes teerunout = yes tune = base,peak use_submit_for_speed = yes ################################################################################ # Include the flags file: ################################################################################ #include: %{flags_inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_znver4_A1_flags.inc' ############################################################################ ################################################################################ # AMD AOCC 4.0.0 SPEC CPU2017 V1.1.8 Speed Configuration Flags for AMD64 Linux ################################################################################ # Compilers ################################################################################ default: CC = clang -m64 CXX = clang++ -m64 FC = flang -m64 CLD = clang -m64 CXXLD = clang++ -m64 FLD = flang -m64 CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version ################################################################################ # Portability Flags ################################################################################ default: # data model applies to all benchmarks EXTRA_PORTABILITY = -DSPEC_LP64 # *** Benchmark-specific portability *** # Anything other than the data model is only allowed where a need is proven. # (ordered by last 2 digits of benchmark number) 600.perlbench_s: #lang='C' PORTABILITY = -DSPEC_LINUX_X64 621.wrf_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio 623.xalancbmk_s: #lang='CXX' PORTABILITY = -DSPEC_LINUX 627.cam4_s: #lang='F,C' PORTABILITY = -DSPEC_CASE_FLAG 628.pop2_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio ################################################################################ # Default libraries and variables ################################################################################ default: # Libraries: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdalloc \ -lamdlibm \ -lm MATHLIBOPT = #clearing this variable or else SPEC will set it to -lm VECMATHLIB = -fveclib=AMDLIBM # Variables: OPT_ROOT = -march=znver4 \ $(VECMATHLIB) \ -ffast-math \ -fopenmp OPT_ROOT_BASE = -O3 \ $(OPT_ROOT) OPT_ROOT_PEAK = -Ofast \ $(OPT_ROOT) \ -flto THP_ALWAYS = echo always > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag THP_NEVER = echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo never > /sys/kernel/mm/transparent_hugepage/defrag THP_MADVISE = echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag DEFAULT_SUBMIT = echo "$command" > run.sh ; $BIND bash run.sh ############################################################################### # AOCC 4.0.0 workarounds that do not count as PORTABILITY ################################################################################ # The workarounds in this section would not qualify under the SPEC CPU # PORTABILITY rule. # - In peak, they can be set as needed for individual benchmarks. # - In base, individual settings are not allowed; set for whole suite. # Use EXTRA_CFLAGS, EXTRA_CXXFLAGS, and EXTRA_FFLAGS for them. # # See: # https://www.spec.org/cpu2017/Docs/runrules.html#portability # https://www.spec.org/cpu2017/Docs/runrules.html#BaseFlags ####################### # Default workarounds # ####################### default: # Allow unused compile/link arguments without triggering warnings during build: EXTRA_CFLAGS = -Wno-unused-command-line-argument EXTRA_CXXFLAGS = -Wno-unused-command-line-argument EXTRA_FFLAGS = -Wno-unused-command-line-argument LDOPTIONS = -Wno-unused-command-line-argument #################### # Base workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - base # ############################## intrate=base: # The following is necessary for 602 gcc: EXTRA_LDFLAGS = -z muldefs ######################### # FP workarounds - base # ######################### # # *** NONE *** # #################### # Peak workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - peak # ############################## 602.gcc_s=peak: #lang='C' EXTRA_LDFLAGS = -z muldefs ##################################### # Floating Point workarounds - peak # ##################################### # # *** NONE *** # ################################################################################ # Tuning Flags ################################################################################ ##################### # Base tuning flags # ##################### default=base: COPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -fstruct-layout=7 \ -mllvm -unroll-threshold=50 \ -mllvm -inline-threshold=1000 \ -fremap-arrays \ -fstrip-mining \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -unroll-threshold=100 \ -finline-aggressive \ -mllvm -loop-unswitch-threshold=200000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching #other libraries # Put OpenMP and math libraries here: # -lm needed at the end for some transcendental functions: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm EXTRA_FLIBS = # Don't put the AMD and mvec math libraries in MATHLIBOPT because it will trigger a reporting issue # because GCC won't use them. Forcefeed all benchmarks the math libraries in EXTRA_LIBS and clear # out MATHLIBOPT. MATHLIBOPT = ######################### # intspeed tuning flags # ######################### intspeed: FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -optimize-strided-mem-cost EXTRA_FFLAGS = -mllvm -unroll-aggressive \ -mllvm -unroll-threshold=150 EXTRA_CXXFLAGS = -fvirtual-function-elimination \ -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDCFLAGS = -Wl,-allow-multiple-definition LDCXXFLAGS = LDFFLAGS = -Wl,-mllvm -Wl,-inline-recursion=4 \ -Wl,-mllvm -Wl,-lsr-in-nested-loop \ -Wl,-mllvm -Wl,-enable-iv-split ############################## # intspeed base tuning flags # ############################## intspeed=base: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lflang \ -lm EXTRA_CLIBS = -lamdalloc EXTRA_CXXLIBS = -lamdalloc-ext EXTRA_FLIBS = -lamdalloc submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################## # intspeed peak tuning flags # ############################## intspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed base tuning flags # ############################# fpspeed=base: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed peak tuning flags # ############################# fpspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ##################### # Peak tuning flags # ##################### default=peak: COPTIMIZE = $(OPT_ROOT_PEAK) -fstruct-layout=9 \ -mllvm -unroll-threshold=50 \ -fremap-arrays \ -fstrip-mining \ -mllvm -inline-threshold=1000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_PEAK) -finline-aggressive \ -mllvm -unroll-threshold=100 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_PEAK) -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm feedback = 0 PASS1_CFLAGS = -fprofile-instr-generate PASS2_CFLAGS = -fprofile-instr-use PASS1_FFLAGS = -fprofile-generate PASS2_FFLAGS = -fprofile-use PASS1_CXXFLAGS = -fprofile-instr-generate PASS2_CXXFLAGS = -fprofile-instr-use PASS1_LDFLAGS = -fprofile-instr-generate PASS2_LDFLAGS = -fprofile-instr-use fdo_run1 = $command ; llvm-profdata merge --output=default.profdata *.profraw # Benchmark specific peak tuning flags: 603.bwaves_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 607.cactuBSSN_s=peak: #lang='CXX,C,F' submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 619.lbm_s=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 620.omnetpp_s=peak: #lang='CXX' EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang -lm 621.wrf_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT_BASE) \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt submit = ${THP_NEVER}; ${DEFAULT_SUBMIT} 623.xalancbmk_s=peak: #lang='CXX' EXTRA_CXXFLAGS = -mllvm -do-block-reorder=aggressive \ -fvirtual-function-elimination -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 \ -Wl,-mllvm -Wl,-do-block-reorder=aggressive EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang \ -lm 627.cam4_s=peak: #lang='F,C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 628.pop2_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT) \ -Ofast \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 638.imagick_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 644.nab_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-region-vectorize submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 649.fotonik3d_s=peak: #lang='F' ENV_PGHPF_ZMEM = yes submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 654.roms_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_MADVISE}; ${DEFAULT_SUBMIT} 657.xz_s=peak: #lang='C' ENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 8 # ---- End inclusion of '/home/cpu2017/config/amd_speed_aocc400_znver4_A1_flags.inc' # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:2eb381fc1a58eb8122e4a1b875c1e38b3489dac84088192aa0ec6d157b084d06) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /home/cpu2017/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6732 of 2022-11-07 fe91c89b7ed5c36ae2c92cc097bec197 notes_plat_sysinfo_015 = running on localhost Mon Aug 12 06:48:14 2024 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = notes_plat_sysinfo_035 = ------------------------------------------------------------ notes_plat_sysinfo_040 = Table of contents notes_plat_sysinfo_045 = ------------------------------------------------------------ notes_plat_sysinfo_050 = 1. uname -a notes_plat_sysinfo_055 = 2. w notes_plat_sysinfo_060 = 3. Username notes_plat_sysinfo_065 = 4. ulimit -a notes_plat_sysinfo_070 = 5. sysinfo process ancestry notes_plat_sysinfo_075 = 6. /proc/cpuinfo notes_plat_sysinfo_080 = 7. lscpu notes_plat_sysinfo_085 = 8. numactl --hardware notes_plat_sysinfo_090 = 9. /proc/meminfo notes_plat_sysinfo_095 = 10. who -r notes_plat_sysinfo_100 = 11. Systemd service manager version: systemd 249 (249.16+suse.171.gdad0071f15) notes_plat_sysinfo_105 = 12. Services, from systemctl list-unit-files notes_plat_sysinfo_110 = 13. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_115 = 14. cpupower frequency-info notes_plat_sysinfo_120 = 15. sysctl notes_plat_sysinfo_125 = 16. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_130 = 17. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_135 = 18. OS release notes_plat_sysinfo_140 = 19. Disk information notes_plat_sysinfo_145 = 20. /sys/devices/virtual/dmi/id notes_plat_sysinfo_150 = 21. dmidecode notes_plat_sysinfo_155 = 22. BIOS notes_plat_sysinfo_160 = ------------------------------------------------------------ notes_plat_sysinfo_165 = notes_plat_sysinfo_170 = ------------------------------------------------------------ notes_plat_sysinfo_175 = 1. uname -a notes_plat_sysinfo_180 = Linux localhost 5.14.21-150500.53-default #1 SMP PREEMPT_DYNAMIC Wed May 10 07:56:26 UTC 2023 (b630043) notes_plat_sysinfo_185 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = ------------------------------------------------------------ notes_plat_sysinfo_200 = 2. w notes_plat_sysinfo_205 = 06:48:14 up 32 min, 1 user, load average: 0.97, 1.65, 1.67 notes_plat_sysinfo_210 = USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT notes_plat_sysinfo_215 = root tty1 - 06:47 38.00s 1.33s 0.11s /bin/bash ./amd_speed_aocc400_znver4_A1.sh notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = ------------------------------------------------------------ notes_plat_sysinfo_230 = 3. Username notes_plat_sysinfo_235 = From environment variable $USER: root notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = ------------------------------------------------------------ notes_plat_sysinfo_250 = 4. ulimit -a notes_plat_sysinfo_255 = core file size (blocks, -c) unlimited notes_plat_sysinfo_260 = data seg size (kbytes, -d) unlimited notes_plat_sysinfo_265 = scheduling priority (-e) 0 notes_plat_sysinfo_270 = file size (blocks, -f) unlimited notes_plat_sysinfo_275 = pending signals (-i) 6190914 notes_plat_sysinfo_280 = max locked memory (kbytes, -l) 2097152 notes_plat_sysinfo_285 = max memory size (kbytes, -m) unlimited notes_plat_sysinfo_290 = open files (-n) 1024 notes_plat_sysinfo_295 = pipe size (512 bytes, -p) 8 notes_plat_sysinfo_300 = POSIX message queues (bytes, -q) 819200 notes_plat_sysinfo_305 = real-time priority (-r) 0 notes_plat_sysinfo_310 = stack size (kbytes, -s) unlimited notes_plat_sysinfo_315 = cpu time (seconds, -t) unlimited notes_plat_sysinfo_320 = max user processes (-u) 6190914 notes_plat_sysinfo_325 = virtual memory (kbytes, -v) unlimited notes_plat_sysinfo_330 = file locks (-x) unlimited notes_plat_sysinfo_335 = notes_plat_sysinfo_340 = ------------------------------------------------------------ notes_plat_sysinfo_345 = 5. sysinfo process ancestry notes_plat_sysinfo_350 = /usr/lib/systemd/systemd --switched-root --system --deserialize 34 notes_plat_sysinfo_355 = login -- root notes_plat_sysinfo_360 = -bash notes_plat_sysinfo_365 = python3 ./run_amd_speed_aocc400_znver4_A1.py -b intspeed notes_plat_sysinfo_370 = /bin/bash ./amd_speed_aocc400_znver4_A1.sh notes_plat_sysinfo_375 = runcpu --config amd_speed_aocc400_znver4_A1.cfg --tune all --reportable --iterations 3 intspeed notes_plat_sysinfo_380 = runcpu --configfile amd_speed_aocc400_znver4_A1.cfg --tune all --reportable --iterations 3 --nopower notes_plat_sysinfo_385 = --runmode speed --tune base:peak --size test:train:refspeed intspeed --nopreenv --note-preenv --logfile notes_plat_sysinfo_390 = $SPEC/tmp/CPU2017.001/templogs/preenv.intspeed.001.0.log --lognum 001.0 --from_runcpu 2 notes_plat_sysinfo_395 = specperl $SPEC/bin/sysinfo notes_plat_sysinfo_400 = $SPEC = /home/cpu2017 notes_plat_sysinfo_405 = notes_plat_sysinfo_410 = ------------------------------------------------------------ notes_plat_sysinfo_415 = 6. /proc/cpuinfo notes_plat_sysinfo_420 = model name : AMD EPYC 9754 128-Core Processor notes_plat_sysinfo_425 = vendor_id : AuthenticAMD notes_plat_sysinfo_430 = cpu family : 25 notes_plat_sysinfo_435 = model : 160 notes_plat_sysinfo_440 = stepping : 2 notes_plat_sysinfo_445 = microcode : 0xaa00215 notes_plat_sysinfo_450 = bugs : sysret_ss_attrs spectre_v1 spectre_v2 spec_store_bypass notes_plat_sysinfo_455 = TLB size : 3584 4K pages notes_plat_sysinfo_460 = cpu cores : 128 notes_plat_sysinfo_465 = siblings : 128 notes_plat_sysinfo_470 = 2 physical ids (chips) notes_plat_sysinfo_475 = 256 processors (hardware threads) notes_plat_sysinfo_480 = physical id 0: core ids notes_plat_sysinfo_485 = 0-7,16-23,32-39,48-55,64-71,80-87,96-103,112-119,128-135,144-151,160-167,176-183,192-199,208-215,224-231, notes_plat_sysinfo_490 = 240-247 notes_plat_sysinfo_495 = physical id 1: core ids notes_plat_sysinfo_500 = 0-7,16-23,32-39,48-55,64-71,80-87,96-103,112-119,128-135,144-151,160-167,176-183,192-199,208-215,224-231, notes_plat_sysinfo_505 = 240-247 notes_plat_sysinfo_510 = physical id 0: apicids notes_plat_sysinfo_515 = 0-7,16-23,32-39,48-55,64-71,80-87,96-103,112-119,128-135,144-151,160-167,176-183,192-199,208-215,224-231, notes_plat_sysinfo_520 = 240-247 notes_plat_sysinfo_525 = physical id 1: apicids notes_plat_sysinfo_530 = 256-263,272-279,288-295,304-311,320-327,336-343,352-359,368-375,384-391,400-407,416-423,432-439,448-455,4 notes_plat_sysinfo_535 = 64-471,480-487,496-503 notes_plat_sysinfo_540 = Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for notes_plat_sysinfo_545 = virtualized systems. Use the above data carefully. notes_plat_sysinfo_550 = notes_plat_sysinfo_555 = ------------------------------------------------------------ notes_plat_sysinfo_560 = 7. lscpu notes_plat_sysinfo_565 = notes_plat_sysinfo_570 = From lscpu from util-linux 2.37.4: notes_plat_sysinfo_575 = Architecture: x86_64 notes_plat_sysinfo_580 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_585 = Address sizes: 52 bits physical, 57 bits virtual notes_plat_sysinfo_590 = Byte Order: Little Endian notes_plat_sysinfo_595 = CPU(s): 256 notes_plat_sysinfo_600 = On-line CPU(s) list: 0-255 notes_plat_sysinfo_605 = Vendor ID: AuthenticAMD notes_plat_sysinfo_610 = Model name: AMD EPYC 9754 128-Core Processor notes_plat_sysinfo_615 = CPU family: 25 notes_plat_sysinfo_620 = Model: 160 notes_plat_sysinfo_625 = Thread(s) per core: 1 notes_plat_sysinfo_630 = Core(s) per socket: 128 notes_plat_sysinfo_635 = Socket(s): 2 notes_plat_sysinfo_640 = Stepping: 2 notes_plat_sysinfo_645 = Frequency boost: enabled notes_plat_sysinfo_650 = CPU max MHz: 3100.3411 notes_plat_sysinfo_655 = CPU min MHz: 1500.0000 notes_plat_sysinfo_660 = BogoMIPS: 4492.95 notes_plat_sysinfo_665 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 notes_plat_sysinfo_670 = clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm notes_plat_sysinfo_675 = constant_tsc rep_good amd_lbr_v2 nopl nonstop_tsc cpuid extd_apicid notes_plat_sysinfo_680 = aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16 pcid sse4_1 sse4_2 notes_plat_sysinfo_685 = x2apic movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm notes_plat_sysinfo_690 = extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt notes_plat_sysinfo_695 = tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb cat_l3 notes_plat_sysinfo_700 = cdp_l3 invpcid_single hw_pstate ssbd mba perfmon_v2 ibrs ibpb stibp notes_plat_sysinfo_705 = vmmcall fsgsbase bmi1 avx2 smep bmi2 erms invpcid cqm rdt_a avx512f notes_plat_sysinfo_710 = avx512dq rdseed adx smap avx512ifma clflushopt clwb avx512cd sha_ni notes_plat_sysinfo_715 = avx512bw avx512vl xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc notes_plat_sysinfo_720 = cqm_mbm_total cqm_mbm_local avx512_bf16 clzero irperf xsaveerptr rdpru notes_plat_sysinfo_725 = wbnoinvd amd_ppin cppc arat npt lbrv svm_lock nrip_save tsc_scale notes_plat_sysinfo_730 = vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic notes_plat_sysinfo_735 = v_vmsave_vmload vgif v_spec_ctrl avx512vbmi umip pku ospke avx512_vbmi2 notes_plat_sysinfo_740 = gfni vaes vpclmulqdq avx512_vnni avx512_bitalg avx512_vpopcntdq la57 rdpid notes_plat_sysinfo_745 = overflow_recov succor smca fsrm flush_l1d notes_plat_sysinfo_750 = Virtualization: AMD-V notes_plat_sysinfo_755 = L1d cache: 8 MiB (256 instances) notes_plat_sysinfo_760 = L1i cache: 8 MiB (256 instances) notes_plat_sysinfo_765 = L2 cache: 256 MiB (256 instances) notes_plat_sysinfo_770 = L3 cache: 512 MiB (32 instances) notes_plat_sysinfo_775 = NUMA node(s): 2 notes_plat_sysinfo_780 = NUMA node0 CPU(s): 0-127 notes_plat_sysinfo_785 = NUMA node1 CPU(s): 128-255 notes_plat_sysinfo_790 = Vulnerability Itlb multihit: Not affected notes_plat_sysinfo_795 = Vulnerability L1tf: Not affected notes_plat_sysinfo_800 = Vulnerability Mds: Not affected notes_plat_sysinfo_805 = Vulnerability Meltdown: Not affected notes_plat_sysinfo_810 = Vulnerability Mmio stale data: Not affected notes_plat_sysinfo_815 = Vulnerability Retbleed: Not affected notes_plat_sysinfo_820 = Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl and seccomp notes_plat_sysinfo_825 = Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization notes_plat_sysinfo_830 = Vulnerability Spectre v2: Mitigation; Retpolines, IBPB conditional, IBRS_FW, STIBP disabled, RSB notes_plat_sysinfo_835 = filling, PBRSB-eIBRS Not affected notes_plat_sysinfo_840 = Vulnerability Srbds: Not affected notes_plat_sysinfo_845 = Vulnerability Tsx async abort: Not affected notes_plat_sysinfo_850 = notes_plat_sysinfo_855 = From lscpu --cache: notes_plat_sysinfo_860 = NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE notes_plat_sysinfo_865 = L1d 32K 8M 8 Data 1 64 1 64 notes_plat_sysinfo_870 = L1i 32K 8M 8 Instruction 1 64 1 64 notes_plat_sysinfo_875 = L2 1M 256M 8 Unified 2 2048 1 64 notes_plat_sysinfo_880 = L3 16M 512M 16 Unified 3 16384 1 64 notes_plat_sysinfo_885 = notes_plat_sysinfo_890 = ------------------------------------------------------------ notes_plat_sysinfo_895 = 8. numactl --hardware notes_plat_sysinfo_900 = NOTE: a numactl 'node' might or might not correspond to a physical chip. notes_plat_sysinfo_905 = available: 2 nodes (0-1) notes_plat_sysinfo_910 = node 0 cpus: 0-127 notes_plat_sysinfo_915 = node 0 size: 773775 MB notes_plat_sysinfo_920 = node 0 free: 772232 MB notes_plat_sysinfo_925 = node 1 cpus: 128-255 notes_plat_sysinfo_930 = node 1 size: 773983 MB notes_plat_sysinfo_935 = node 1 free: 772284 MB notes_plat_sysinfo_940 = node distances: notes_plat_sysinfo_945 = node 0 1 notes_plat_sysinfo_950 = 0: 10 32 notes_plat_sysinfo_955 = 1: 32 10 notes_plat_sysinfo_960 = notes_plat_sysinfo_965 = ------------------------------------------------------------ notes_plat_sysinfo_970 = 9. /proc/meminfo notes_plat_sysinfo_975 = MemTotal: 1584905408 kB notes_plat_sysinfo_980 = notes_plat_sysinfo_985 = ------------------------------------------------------------ notes_plat_sysinfo_990 = 10. who -r notes_plat_sysinfo_995 = run-level 3 Aug 12 06:19 notes_plat_sysinfo_1000= notes_plat_sysinfo_1005= ------------------------------------------------------------ notes_plat_sysinfo_1010= 11. Systemd service manager version: systemd 249 (249.16+suse.171.gdad0071f15) notes_plat_sysinfo_1015= Default Target Status notes_plat_sysinfo_1020= multi-user running notes_plat_sysinfo_1025= notes_plat_sysinfo_1030= ------------------------------------------------------------ notes_plat_sysinfo_1035= 12. Services, from systemctl list-unit-files notes_plat_sysinfo_1040= STATE UNIT FILES notes_plat_sysinfo_1045= enabled YaST2-Firstboot YaST2-Second-Stage apparmor auditd cron getty@ irqbalance issue-generator notes_plat_sysinfo_1050= kbdsettings klog lvm2-monitor nscd postfix purge-kernels rollback rsyslog smartd sshd notes_plat_sysinfo_1055= systemd-pstore wicked wickedd-auto4 wickedd-dhcp4 wickedd-dhcp6 wickedd-nanny notes_plat_sysinfo_1060= enabled-runtime systemd-remount-fs notes_plat_sysinfo_1065= disabled autofs autoyast-initscripts blk-availability boot-sysctl ca-certificates chrony-wait notes_plat_sysinfo_1070= chronyd console-getty cups cups-browsed debug-shell ebtables exchange-bmc-os-info notes_plat_sysinfo_1075= firewalld gpm grub2-once haveged haveged-switch-root hv_fcopy_daemon hv_kvp_daemon notes_plat_sysinfo_1080= hv_vss_daemon hwloc-dump-hwdata ipmi ipmievd issue-add-ssh-keys kexec-load ksm kvm_stat notes_plat_sysinfo_1085= lunmask man-db-create multipathd munge nfs nfs-blkmap rpcbind rpmconfigcheck rsyncd notes_plat_sysinfo_1090= salt-minion serial-getty@ slurmd smartd_generate_opts snmpd snmptrapd svnserve notes_plat_sysinfo_1095= systemd-boot-check-no-failures systemd-network-generator systemd-sysext notes_plat_sysinfo_1100= systemd-time-wait-sync systemd-timesyncd udisks2 ypbind notes_plat_sysinfo_1105= indirect wickedd notes_plat_sysinfo_1110= notes_plat_sysinfo_1115= ------------------------------------------------------------ notes_plat_sysinfo_1120= 13. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_1125= BOOT_IMAGE=/boot/vmlinuz-5.14.21-150500.53-default notes_plat_sysinfo_1130= root=UUID=e8c160f1-1c7f-452d-a482-9898e4af1927 notes_plat_sysinfo_1135= splash=silent notes_plat_sysinfo_1140= mitigations=auto notes_plat_sysinfo_1145= quiet notes_plat_sysinfo_1150= security=apparmor notes_plat_sysinfo_1155= notes_plat_sysinfo_1160= ------------------------------------------------------------ notes_plat_sysinfo_1165= 14. cpupower frequency-info notes_plat_sysinfo_1170= analyzing CPU 0: notes_plat_sysinfo_1175= current policy: frequency should be within 1.50 GHz and 2.25 GHz. notes_plat_sysinfo_1180= The governor "performance" may decide which speed to use notes_plat_sysinfo_1185= within this range. notes_plat_sysinfo_1190= boost state support: notes_plat_sysinfo_1195= Supported: yes notes_plat_sysinfo_1200= Active: yes notes_plat_sysinfo_1205= notes_plat_sysinfo_1210= ------------------------------------------------------------ notes_plat_sysinfo_1215= 15. sysctl notes_plat_sysinfo_1220= kernel.numa_balancing 1 notes_plat_sysinfo_1225= kernel.randomize_va_space 0 notes_plat_sysinfo_1230= vm.compaction_proactiveness 20 notes_plat_sysinfo_1235= vm.dirty_background_bytes 0 notes_plat_sysinfo_1240= vm.dirty_background_ratio 10 notes_plat_sysinfo_1245= vm.dirty_bytes 0 notes_plat_sysinfo_1250= vm.dirty_expire_centisecs 3000 notes_plat_sysinfo_1255= vm.dirty_ratio 8 notes_plat_sysinfo_1260= vm.dirty_writeback_centisecs 500 notes_plat_sysinfo_1265= vm.dirtytime_expire_seconds 43200 notes_plat_sysinfo_1270= vm.extfrag_threshold 500 notes_plat_sysinfo_1275= vm.min_unmapped_ratio 1 notes_plat_sysinfo_1280= vm.nr_hugepages 0 notes_plat_sysinfo_1285= vm.nr_hugepages_mempolicy 0 notes_plat_sysinfo_1290= vm.nr_overcommit_hugepages 0 notes_plat_sysinfo_1295= vm.swappiness 1 notes_plat_sysinfo_1300= vm.watermark_boost_factor 15000 notes_plat_sysinfo_1305= vm.watermark_scale_factor 10 notes_plat_sysinfo_1310= vm.zone_reclaim_mode 1 notes_plat_sysinfo_1315= notes_plat_sysinfo_1320= ------------------------------------------------------------ notes_plat_sysinfo_1325= 16. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_1330= defrag [always] defer defer+madvise madvise never notes_plat_sysinfo_1335= enabled [always] madvise never notes_plat_sysinfo_1340= hpage_pmd_size 2097152 notes_plat_sysinfo_1345= shmem_enabled always within_size advise [never] deny force notes_plat_sysinfo_1350= notes_plat_sysinfo_1355= ------------------------------------------------------------ notes_plat_sysinfo_1360= 17. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_1365= alloc_sleep_millisecs 60000 notes_plat_sysinfo_1370= defrag 1 notes_plat_sysinfo_1375= max_ptes_none 511 notes_plat_sysinfo_1380= max_ptes_shared 256 notes_plat_sysinfo_1385= max_ptes_swap 64 notes_plat_sysinfo_1390= pages_to_scan 4096 notes_plat_sysinfo_1395= scan_sleep_millisecs 10000 notes_plat_sysinfo_1400= notes_plat_sysinfo_1405= ------------------------------------------------------------ notes_plat_sysinfo_1410= 18. OS release notes_plat_sysinfo_1415= From /etc/*-release /etc/*-version notes_plat_sysinfo_1420= os-release SUSE Linux Enterprise Server 15 SP5 notes_plat_sysinfo_1425= notes_plat_sysinfo_1430= ------------------------------------------------------------ notes_plat_sysinfo_1435= 19. Disk information notes_plat_sysinfo_1440= SPEC is set to: /home/cpu2017 notes_plat_sysinfo_1445= Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_1450= /dev/sda3 btrfs 215G 11G 203G 6% /home notes_plat_sysinfo_1455= notes_plat_sysinfo_1460= ------------------------------------------------------------ notes_plat_sysinfo_1465= 20. /sys/devices/virtual/dmi/id notes_plat_sysinfo_1470= Vendor: Cisco Systems Inc notes_plat_sysinfo_1475= Product: UCSC-C245-M8SX notes_plat_sysinfo_1480= Serial: WZP2750Z0CS notes_plat_sysinfo_1485= notes_plat_sysinfo_1490= ------------------------------------------------------------ notes_plat_sysinfo_1495= 21. dmidecode notes_plat_sysinfo_1500= Additional information from dmidecode 3.4 follows. WARNING: Use caution when you interpret this section. notes_plat_sysinfo_1505= The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_1510= determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the notes_plat_sysinfo_1515= "DMTF SMBIOS" standard. notes_plat_sysinfo_1520= Memory: notes_plat_sysinfo_1525= 24x 0xCE00 M321R8GA0PB0-CWMCH 64 GB 2 rank 5600, configured at 4800 notes_plat_sysinfo_1530= notes_plat_sysinfo_1535= notes_plat_sysinfo_1540= ------------------------------------------------------------ notes_plat_sysinfo_1545= 22. BIOS notes_plat_sysinfo_1550= (This section combines info from /sys/devices and dmidecode.) notes_plat_sysinfo_1555= BIOS Vendor: Cisco Systems, Inc. notes_plat_sysinfo_1560= BIOS Version: C245M8.4.3.4a.0.0520240849 notes_plat_sysinfo_1565= BIOS Date: 05/20/2024 notes_plat_sysinfo_1570= BIOS Revision: 5.27 hw_cpu_name = AMD EPYC 9754 hw_disk = 215 GB add more disk info here hw_memory001 = 1511.484 GB fixme: If using DDR4, the format is: hw_memory002 = 'N GB (N x N GB nRxn PC4-nnnnX-X)' hw_nchips = 2 hw_ncores = 256 hw_nthreadspercore = 1 prepared_by = root (is never output, only tags rawfile) sw_file = btrfs sw_os001 = SUSE Linux Enterprise Server 15 SP5 sw_os002 = 5.14.21-150500.53-default sw_state = Run level 3 (add definition here) # End of settings added by sysinfo_program 657.xz_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 648.exchange2_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 641.leela_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 631.deepsjeng_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 602.gcc_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 600.perlbench_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: power_management000 = BIOS and OS set to prefer performance power_management001 = at the cost of additional power usage. notes_plat_form_000 = notes_plat_form_005 =BIOS settings: notes_plat_form_010 =SMT Mode set to Disabled notes_plat_form_015 =NUMA nodes per socket set to NPS1 notes_plat_form_020 =Determinism Slider set to Power notes_plat_form_025 =DF C-States set to Disabled notes_plat_form_030 =