# Invocation command line: # /spec2017/bin/harness/runcpu --define default-platform-flags --copies 104 --configfile ic2021.1-lin-core-avx512-rate-20201113_revB.cfg --define smt-on --define cores=52 --define physicalfirst --define invoke_with_interleave --define drop_caches --tune base --output_format all --nopower --runmode rate --tune base --size refrate intrate # output_root was not used for this run ############################################################################ #------------------------------------------------------------------------------ # This is a sample SPEC CPU2017 config file. It is applicable for: # # Compiler name/version: Intel(R) C/C++ and Fortran 2021 Compilers for Linux # Operating system version: Red Hat Enterprise Linux 8.1, GLIBC 2.28 # ld version: GNU ld version 2.30 and above (older version may not work) # Hardware: Intel(R) processors supporting CORE-AVX512 tuning # # If you wish to build your own: # (1) Copy this to a new name # cd %SPEC%/config # copy this.cfg that.cfg # (2) Change items that are marked 'EDIT' (search for it) # # If you have different software or hardware, this config file may not work. # You may find a better config file for your system next to posted results: # http://www.spec.org/cpu2017/results # # Compiler issues: Contact your compiler vendor, not SPEC. # For SPEC help: http://www.spec.org/auto/cpu2017/Docs/techsupport.html #------------------------------------------------------------------------------ # Current setup is for intrate only # #--------- Preprocessor ------------------------------------------------------- # # Optionally edit if you wish: %define build_ncpus 8 # controls number of simultaneous compiles # Used to date the label %define version 20201113_revB # Used for the optimization tuning part of the label (not required) %if defined(%{noopt}) %define opt_label -noopt %elif defined(%{medopt}) %define opt_label -medopt %else %define opt_label %endif # Used for labeling static linked builds (not required) %if defined(%{static}) %define static_label -static %else %define static_label %endif #--------- Label -------------------------------------------------------------- # Arbitrary string, tags your binaries & directories. # Two Suggestions: # (1) Change this label as you try new ideas. label = ic2021.1-lin-core-avx512-rate%{opt_label}%{static_label}-%{version} #--------- Global Settings ---------------------------------------------------- # For info, see: # https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname XXX # Example: https://www.spec.org/auto/cpu2017/Docs/config.html#tune ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'label' to track binaries. # ######################################################## # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=1 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # action = validate command_add_redirect = 1 line_width = 1020 log_line_width = 1020 makeflags = -j%{build_ncpus} output_format = txt,cfg,pdf,csv preenv = 1 tune = base bench_post_setup = sync parallel_test = 1 mean_anyway = 1 reportable = 1 copies = 1 #Reference the flags Files flagsurl000=http://www.spec.org/cpu2017/flags/Intel-ic2021-official-linux64_revA.xml %ifdef %{default-platform-flags} flagsurl001=http://www.spec.org/cpu2017/flags/xFusion-Platform-Settings-CSL-V1.1.xml %endif # Set some environment variables # Retain unused virtual memory for later reuse. This avoids out of memory errors for certain benchmarks. preENV_MALLOC_CONF = retain:true intrate: preENV_LD_LIBRARY_PATH = $[top]/lib/intel64:$[top]/lib/ia32 fprate: preENV_LD_LIBRARY_PATH = $[top]/lib/intel64:$[top]/je5.0.1-64 # Affinitization # For UP systems, we need to know if the processors are ordered across cores first or in order # If across cores, processors 0, 1, 2 and 3 are on distinct physical cores # Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores default: submit = numactl --localalloc --physcpubind=$SPECCOPYNUM -- $command %ifdef %{no-numa} submit = taskset -c $SPECCOPYNUM $command %endif OPT_JCC = -mbranches-within-32B-boundaries OPT_JCC_icx = -mbranches-within-32B-boundaries #--------- Compilers ---------------------------------------------------------- default: CC = icx -w -m64 -std=c11 CXX = icpx -w -m64 FC = ifort -w -m64 # How to say "Show me your version, please" CC_VERSION_OPTION = -V CXX_VERSION_OPTION = -V FC_VERSION_OPTION = -V JEMALLOC32_DIR = /usr/local/jemalloc32-5.0.1/lib JEMALLOC64_DIR = /usr/local/jemalloc64-5.0.1/lib INTEL64_DIR = /opt/intel/oneapi/compiler/2021.1.1/linux/compiler/lib/intel64_lin INTEL32_DIR = /opt/intel/oneapi/compiler/2021.1.1/linux/compiler/lib/ia32_lin %if !defined(%{static}) JEMALLOC32 = jemalloc JEMALLOC64 = jemalloc QKMALLOC = qkmalloc %else JEMALLOC32 = libjemalloc.a JEMALLOC64 = libjemalloc.a %endif #--------- Portability -------------------------------------------------------- intrate,fprate: PORTABILITY= -DSPEC_LP64 500.perlbench_r: CPORTABILITY = -DSPEC_LINUX_X64 521.wrf_r: CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY= -convert big_endian 523.xalancbmk_r: CXXPORTABILITY=-DSPEC_LINUX 526.blender_r: CPORTABILITY= -DSPEC_LINUX -funsigned-char 527.cam4_r: CPORTABILITY= -DSPEC_CASE_FLAG #--------- How Many CPUs? ----------------------------------------------------- # Both SPECrate and SPECspeed can test multiple chips / cores / hw threads # - For SPECrate, you set the number of copies. # See: https://www.spec.org/cpu2017/Docs/system-requirements.html#MultipleCPUs # # q. How many should I set? # a. Unknown, you will have to try it and see! # # To get you started, some suggestions: # # copies - This config file defaults to testing only 1 copy. You might # try changing it to match the number of cores on your system, # or perhaps the number of virtual CPUs as reported by: # grep -c processor /proc/cpuinfo # Be sure you have enough memory. See: # https://www.spec.org/cpu2017/Docs/system-requirements.html#memory # default: %if defined (%{numcopies}) copies = %{numcopies} %else copies = 1 # EDIT to change number of copies (see above) %endif #-------- Tuning Flags ------------------------------------------------- intspeed,fpspeed: #reconsider using a speed config file instead of a rate config file fail=1 default: SSE = -xCORE-AVX512 EXTRA_FOPTIMIZE = -nostandard-realloc-lhs -align array32byte -auto $(OPT_JCC) EXTRA_COPTIMIZE = $(OPT_JCC_icx) EXTRA_CXXOPTIMIZE = $(OPT_JCC_icx) intrate=default: EXTRA_LIBS = -L$(INTEL64_DIR) -l$(QKMALLOC) EXTRA_LDFLAGS = -Wl,-z,muldefs intrate=base: %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -O3 -ffast-math -flto -mfpmath=sse -funroll-loops OPT_ROOT_F = -O3 -ipo -no-prec-div %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT_F) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSEF) $(OPT_ROOT_F) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT_F) %endif %else COPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT_F) -static %endif %endif fprate=default: EXTRA_LIBS = -l$(JEMALLOC64) -L$(JEMALLOC64_DIR) EXTRA_LDFLAGS = -Wl,-z,muldefs fprate=base: %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -Ofast -ffast-math -flto -mfpmath=sse -funroll-loops OPT_ROOT_NOIPO = -Ofast -ffast-math -mfpmath=sse -funroll-loops OPT_ROOT_F = -O3 -ipo -no-prec-div -qopt-prefetch -ffinite-math-only -qopt-multiple-gather-scatter-by-shuffles OPT_ROOT_F_NOIPO = -O3 -no-prec-div -qopt-prefetch -ffinite-math-only -qopt-multiple-gather-scatter-by-shuffles %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT_F) FORT_FAST_NO_STATIC_NOIPO = $(SSE) $(OPT_ROOT_F_NOIPO) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT_F) %endif %else # BASE Options COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT_F) -static %endif %endif # Benchmarks with C/C++/Fortran: 507.cactuBSSN_r=base: COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC_NOIPO) -qopt-mem-layout-trans=4 # End of mixed languages intrate=peak: %if defined(%{noopt}) || defined(%{medopt}) #not building or executing peak against less opt fail=1 %endif OPT_ROOT = -flto -O3 -ffast-math OPT_ROOT_ICC = -ipo -O3 -no-prec-div FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST_NO_STATIC_ICC = $(SSE) $(OPT_ROOT_ICC) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use 500.perlbench_r=peak=default: CC = icc LDFLAGS = %undef% FAST_NO_STATIC_ICC = $(SSE) $(OPT_ROOT_ICC) COPTIMIZE = $(FAST_NO_STATIC_ICC) -qopt-mem-layout-trans=4 EXTRA_OPTIMIZE = -fno-strict-overflow EXTRA_COPTIMIZE = $(OPT_JCC) EXTRA_CXXOPTIMIZE = $(OPT_JCC) 525.x264_r=peak: feedback = 0 EXTRA_OPTIMIZE = -fno-alias 502.gcc_r=peak: CC = icx -m32 -std=gnu89 -L/opt/intel/oneapi/compiler/2021.1.1/linux/compiler/lib/ia32_lin CXX = icpx -m32 -std=gnu89 -L/opt/intel/oneapi/compiler/2021.1.1/linux/compiler/lib/ia32_lin FAST_NO_STATIC = $(SSE) $(OPT_ROOT) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 EXTRA_LIBS = -L$(JEMALLOC32_DIR) -l$(JEMALLOC32) EXTRA_LDFLAGS = -Wl,-z,muldefs PORTABILITY = -D_FILE_OFFSET_BITS=64 EXTRA_COPTIMIZE = $(OPT_JCC_icx) EXTRA_CXXOPTIMIZE = $(OPT_JCC_icx) PASS1_CFLAGS = -fprofile-generate -xCORE-AVX512 -flto -Ofast PASS2_CFLAGS = -fprofile-use=default.profdata PASS1_FFLAGS = -fprofile-generate -xCORE-AVX512 -flto -Ofast PASS2_FFLAGS = -fprofile-use=default.profdata PASS1_CXXFLAGS = -fprofile-generate -xCORE-AVX512 -flto -Ofast PASS2_CXXFLAGS = -fprofile-use=default.profdata PASS1_LDFLAGS = -fprofile-generate -xCORE-AVX512 -flto -Ofast PASS2_LDFLAGS = -fprofile-use=default.profdata fdo_run1 = $command ; llvm-profdata merge -output=default.profdata *.profraw 557.xz_r=peak=default: feedback = 0 CC = icc LDFLAGS = %undef% FAST_NO_STATIC_ICC = $(SSE) $(OPT_ROOT_ICC) COPTIMIZE = $(FAST_NO_STATIC_ICC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 EXTRA_COPTIMIZE = $(OPT_JCC) EXTRA_CXXOPTIMIZE = $(OPT_JCC) 505.mcf_r,520.omnetpp_r,523.xalancbmk_r,531.deepsjeng_r,548.exchange2_r,541.leela_r=peak: basepeak=1 fprate=peak: %if defined(%{noopt}) || defined(%{medopt}) #not building or executing peak against less opt fail=1 %endif OPT_ROOT = -flto -Ofast FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FAST_PASS1 = $(OPT_ROOT) -static FORT_FAST_PASS1 = $(OPT_ROOT) -static FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT_F) FAST_PASS2 = $(SSE) $(OPT_ROOT) -static FORT_FAST_PASS2 = $(SSE) $(OPT_ROOT_F) -static FAST_NO_STATIC = $(SSE) $(OPT_ROOT) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 507.cactuBSSN_r,508.namd_r,519.lbm_r,526.blender_r,527.cam4_r=peak: basepeak=1 538.imagick_r,549.fotonik3d_r,997.specrand_fr=peak: basepeak=1 #fp rate subset for removing FDO 503.bwaves_r,510.parest_r,554.roms_r=peak=default: feedback = 0 %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -Ofast -ffast-math -flto -mfpmath=sse -funroll-loops OPT_ROOT_F = -O3 -ipo -no-prec-div -qopt-prefetch -ffinite-math-only -qopt-multiple-gather-scatter-by-shuffles %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT_F) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT) %endif %else COPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT) -static %endif %endif 511.povray_r,521.wrf_r=peak: CC = icc CXX = icpc FC = ifort OPT_ROOT = -O3 -ipo -no-prec-div -qopt-prefetch -ffinite-math-only -qopt-multiple-gather-scatter-by-shuffles FAST_NO_STATIC = $(SSE) $(OPT_ROOT) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 EXTRA_LIBS = -L$(JEMALLOC64_DIR) -l$(JEMALLOC64) EXTRA_COPTIMIZE = $(OPT_JCC) EXTRA_CXXOPTIMIZE = $(OPT_JCC) LDFLAGS = %undef% EXTRA_LDFLAGS = %undef% PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use 544.nab_r=peak: EXTRA_OPTIMIZE = -fimf-accuracy-bits=14:sqrt %if defined (%{smt-on}) %define numpeakcopies %{cores} %endif 503.bwaves_r,510.parest_r,521.wrf_r,554.roms_r=peak: copies = %{numpeakcopies} #------------------------------------------------------------------------------- # Tester and System Descriptions - EDIT the sections below #------------------------------------------------------------------------------- # For info about any field, see # https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname # Example: https://www.spec.org/auto/cpu2017/Docs/config.html#hw_memory #------------------------------------------------------------------------------- #--------- If you install new compilers, EDIT this section -------------------- intrate,intspeed,fpspeed,fprate: sw_base_ptrsize = 64-bit intrate,intspeed,fprate: sw_compiler000 = C/C++: Version 2021.1 of Intel oneAPI DPC++/C++ sw_compiler001 = Compiler Build 20201113 for Linux; sw_compiler002 = Fortran: Version 2021.1 of Intel Fortran Compiler sw_compiler003 = Classic Build 20201112 for Linux fpspeed: sw_compiler000 = Fortran: Version 2021.1 of Intel Fortran Compiler Classic Build 20201112 for Linux; sw_compiler001 = C/C++: Version 2021.1 of Intel C/C++ Compiler Classic Build 20201112 for Linux intrate,intspeed,fpspeed,fprate: sw_peak_ptrsize = Not Applicable #--------- EDIT Your info --------------------------------------------------------- # To understand the difference between hw_vendor/sponsor/tester, see: # www.spec.org/auto/cpu2017/Docs/config.html#test_sponsor intrate,intspeed,fprate,fpspeed: # Important: keep this line hw_vendor = xFusion tester = xFusion test_sponsor = xFusion license_num = 6488 prepared_by = xFusion #--------- EDIT system availability dates and system information ---------------------------------------------- intrate,intspeed,fprate,fpspeed: # Important: keep this line # Example # Brief info about field hw_avail = Feb-2020 sw_avail = May-2021 hw_cpu_nominal_mhz = 2100 # Nominal chip frequency, in MHz hw_cpu_max_mhz = 4000 # Max chip frequency, in MHz hw_ncores = 52 # number cores enabled hw_ncpuorder = 1,2 chips # Ordering options hw_model = xFusion 5288 V5 (Intel Xeon Gold 6230R) hw_other = None # Other perf-relevant hw, or "None" hw_pcache = 32 KB I + 32 KB D on chip per core # Primary cache size, type, location hw_scache = 1 MB I+D on chip per core # Second cache or "None" hw_tcache = 35.75 MB I+D on chip per chip # Third cache or "None" hw_ocache = None # Other cache or "None" hw_memory000 = 768 GB (24 x 32 GB 2Rx4 PC4-2933Y-R) power_management000= BIOS and OS set to prefer performance at the cost power_management001 = of additional power usage intrate,fprate: hw_nthreadspercore = 2 # number threads enabled per core intspeed,fpspeed: hw_nthreadspercore = 1 # number threads enabled per core intspeed,fprate,fpspeed: sw_other = jemalloc memory allocator V5.0.1 # Other perf-relevant sw, or "None" intrate: sw_other = None # Other perf-relevant sw, or "None" #--------- Sysinfo fields - You may need to adjust this section --------------- # Note: Some commented-out fields above are automatically set to preliminary # values by sysinfo # www.spec.org/auto/cpu2017/Docs/config.html#sysinfo # Uncomment lines for which you already have a better answer than sysinfo # intrate,intspeed,fprate,fpspeed: # Important: keep this line # Example # Brief info about field # hw_cpu_name = # Intel Xeon E9-9999 v9 # chip name # hw_nchips = # 99 # number chips enabled # sw_file = # ext99 # File system hw_disk = 1 x 960 GB SATA SSD sw_state = Run level 3 (multi-user) fw_bios = Version 8.23 Released Dec-2021 # sw_os001 = # Linux Sailboat # Operating system # sw_os002 = # Distribution 7.2 SP1 # and version #--------- EDIT Intel Recommended Fields - You may wish to adjust this section ----- default: notes_000 = Binaries compiled on a system with 1x Intel Core i9-7980XE CPU + 64GB RAM notes_005 = memory using Red Hat Enterprise Linux 8.1 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" #Ease of tagging results from the runcpu command line with commands run outside of runcpu harneess #Adjust as necessary for your SUT %if defined(%{THP_enabled}) notes_200 = Transparent Huge Pages enabled with: notes_201 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %elif defined(%{THP_disabled}) notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %else notes_010 = Transparent Huge Pages enabled by default %endif %ifdef %{drop_caches} notes_015 = Prior to runcpu invocation notes_020 = Filesystem page cache synced and cleared with: notes_025 = sync; echo 3> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_030 = runcpu command invoked through numactl i.e.: notes_035 = numactl --interleave=all runcpu %endif intrate,fprate: %if defined(%{no-numa}) notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %else notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_010 = For details, please see the config file. %endif intspeed,fprate,fpspeed: notes_jemalloc_003 = jemalloc, a general purpose malloc implementation notes_jemalloc_004 = built with the RedHat Enterprise 7.5, and the system compiler gcc 4.8.5 notes_jemalloc_005 = sources available from jemalloc.net or https://github.com/jemalloc/jemalloc/releases intrate,intspeed,fprate,fpspeed: notes_040 = NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_045 = is mitigated in the system as tested and documented. notes_050 = Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_055 = is mitigated in the system as tested and documented. notes_060 = Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_065 = is mitigated in the system as tested and documented. intrate,fprate: notes_plat_000 = BIOS configuration: notes_plat_005 = Power Policy Set to Performance notes_plat_010 = SNC Set to Enabled notes_plat_015 = IMC Interleaving set to 1-way interleave notes_plat_020 = XPT Prefetch set to Enabled intspeed,fpspeed: notes_plat_000 = BIOS configuration: notes_plat_005 = Power Policy Set to Load Balance notes_plat_010 = Hyper-Threading Set to Disable # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:679c83684f6f4fc369a093999b6661d0a378911de2a006d3245423ad80d3fb9a) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /spec2017/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6622 of 2021-04-07 982a61ec0915b55891ef0e16acafc64d notes_plat_sysinfo_015 = running on localhost.localdomain Thu Mar 31 21:35:49 2022 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = For more information on this section, see notes_plat_sysinfo_035 = https://www.spec.org/cpu2017/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon(R) Gold 6230R CPU @ 2.10GHz notes_plat_sysinfo_055 = 2 "physical id"s (chips) notes_plat_sysinfo_060 = 104 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The following notes_plat_sysinfo_070 = excerpts from /proc/cpuinfo might not be reliable. Use with caution.) notes_plat_sysinfo_075 = cpu cores : 26 notes_plat_sysinfo_080 = siblings : 52 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 16 17 18 19 20 21 22 24 25 26 27 28 notes_plat_sysinfo_090 = 29 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 16 17 18 19 20 21 22 24 25 26 27 28 notes_plat_sysinfo_100 = 29 notes_plat_sysinfo_105 = notes_plat_sysinfo_110 = From lscpu from util-linux 2.32.1: notes_plat_sysinfo_115 = Architecture: x86_64 notes_plat_sysinfo_120 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_125 = Byte Order: Little Endian notes_plat_sysinfo_130 = CPU(s): 104 notes_plat_sysinfo_135 = On-line CPU(s) list: 0-103 notes_plat_sysinfo_140 = Thread(s) per core: 2 notes_plat_sysinfo_145 = Core(s) per socket: 26 notes_plat_sysinfo_150 = Socket(s): 2 notes_plat_sysinfo_155 = NUMA node(s): 4 notes_plat_sysinfo_160 = Vendor ID: GenuineIntel notes_plat_sysinfo_165 = BIOS Vendor ID: Intel(R) Corporation notes_plat_sysinfo_170 = CPU family: 6 notes_plat_sysinfo_175 = Model: 85 notes_plat_sysinfo_180 = Model name: Intel(R) Xeon(R) Gold 6230R CPU @ 2.10GHz notes_plat_sysinfo_185 = BIOS Model name: Intel(R) Xeon(R) Gold 6230R CPU @ 2.10GHz notes_plat_sysinfo_190 = Stepping: 7 notes_plat_sysinfo_195 = CPU MHz: 3000.644 notes_plat_sysinfo_200 = CPU max MHz: 4000.0000 notes_plat_sysinfo_205 = CPU min MHz: 1000.0000 notes_plat_sysinfo_210 = BogoMIPS: 4200.00 notes_plat_sysinfo_215 = Virtualization: VT-x notes_plat_sysinfo_220 = L1d cache: 32K notes_plat_sysinfo_225 = L1i cache: 32K notes_plat_sysinfo_230 = L2 cache: 1024K notes_plat_sysinfo_235 = L3 cache: 36608K notes_plat_sysinfo_240 = NUMA node0 CPU(s): 0-3,7-9,13-15,20-22,52-55,59-61,65-67,72-74 notes_plat_sysinfo_245 = NUMA node1 CPU(s): 4-6,10-12,16-19,23-25,56-58,62-64,68-71,75-77 notes_plat_sysinfo_250 = NUMA node2 CPU(s): 26-29,33-35,39-41,46-48,78-81,85-87,91-93,98-100 notes_plat_sysinfo_255 = NUMA node3 CPU(s): 30-32,36-38,42-45,49-51,82-84,88-90,94-97,101-103 notes_plat_sysinfo_260 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov notes_plat_sysinfo_265 = pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp notes_plat_sysinfo_270 = lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid notes_plat_sysinfo_275 = aperfmperf pni pclmulqdq dtes64 ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm notes_plat_sysinfo_280 = pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c notes_plat_sysinfo_285 = rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb cat_l3 cdp_l3 invpcid_single ssbd notes_plat_sysinfo_290 = mba ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad notes_plat_sysinfo_295 = fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid cqm mpx rdt_a avx512f notes_plat_sysinfo_300 = avx512dq rdseed adx smap clflushopt clwb intel_pt avx512cd avx512bw avx512vl notes_plat_sysinfo_305 = xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local notes_plat_sysinfo_310 = dtherm ida arat pln pts pku ospke avx512_vnni md_clear flush_l1d arch_capabilities notes_plat_sysinfo_315 = notes_plat_sysinfo_320 = /proc/cpuinfo cache data notes_plat_sysinfo_325 = cache size : 36608 KB notes_plat_sysinfo_330 = notes_plat_sysinfo_335 = From numactl --hardware notes_plat_sysinfo_340 = WARNING: a numactl 'node' might or might not correspond to a physical chip. notes_plat_sysinfo_345 = available: 4 nodes (0-3) notes_plat_sysinfo_350 = node 0 cpus: 0 1 2 3 7 8 9 13 14 15 20 21 22 52 53 54 55 59 60 61 65 66 67 72 73 74 notes_plat_sysinfo_355 = node 0 size: 191707 MB notes_plat_sysinfo_360 = node 0 free: 184573 MB notes_plat_sysinfo_365 = node 1 cpus: 4 5 6 10 11 12 16 17 18 19 23 24 25 56 57 58 62 63 64 68 69 70 71 75 76 77 notes_plat_sysinfo_370 = node 1 size: 193530 MB notes_plat_sysinfo_375 = node 1 free: 193169 MB notes_plat_sysinfo_380 = node 2 cpus: 26 27 28 29 33 34 35 39 40 41 46 47 48 78 79 80 81 85 86 87 91 92 93 98 99 notes_plat_sysinfo_385 = 100 notes_plat_sysinfo_390 = node 2 size: 193530 MB notes_plat_sysinfo_395 = node 2 free: 193001 MB notes_plat_sysinfo_400 = node 3 cpus: 30 31 32 36 37 38 42 43 44 45 49 50 51 82 83 84 88 89 90 94 95 96 97 101 notes_plat_sysinfo_405 = 102 103 notes_plat_sysinfo_410 = node 3 size: 193492 MB notes_plat_sysinfo_415 = node 3 free: 193024 MB notes_plat_sysinfo_420 = node distances: notes_plat_sysinfo_425 = node 0 1 2 3 notes_plat_sysinfo_430 = 0: 10 11 21 21 notes_plat_sysinfo_435 = 1: 11 10 21 21 notes_plat_sysinfo_440 = 2: 21 21 10 11 notes_plat_sysinfo_445 = 3: 21 21 11 10 notes_plat_sysinfo_450 = notes_plat_sysinfo_455 = From /proc/meminfo notes_plat_sysinfo_460 = MemTotal: 790795004 kB notes_plat_sysinfo_465 = HugePages_Total: 0 notes_plat_sysinfo_470 = Hugepagesize: 2048 kB notes_plat_sysinfo_475 = notes_plat_sysinfo_480 = /sbin/tuned-adm active notes_plat_sysinfo_485 = Current active profile: throughput-performance notes_plat_sysinfo_490 = notes_plat_sysinfo_495 = /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor has notes_plat_sysinfo_500 = performance notes_plat_sysinfo_505 = notes_plat_sysinfo_510 = From /etc/*release* /etc/*version* notes_plat_sysinfo_515 = os-release: notes_plat_sysinfo_520 = NAME="Red Hat Enterprise Linux" notes_plat_sysinfo_525 = VERSION="8.4 (Ootpa)" notes_plat_sysinfo_530 = ID="rhel" notes_plat_sysinfo_535 = ID_LIKE="fedora" notes_plat_sysinfo_540 = VERSION_ID="8.4" notes_plat_sysinfo_545 = PLATFORM_ID="platform:el8" notes_plat_sysinfo_550 = PRETTY_NAME="Red Hat Enterprise Linux 8.4 (Ootpa)" notes_plat_sysinfo_555 = ANSI_COLOR="0;31" notes_plat_sysinfo_560 = redhat-release: Red Hat Enterprise Linux release 8.4 (Ootpa) notes_plat_sysinfo_565 = system-release: Red Hat Enterprise Linux release 8.4 (Ootpa) notes_plat_sysinfo_570 = system-release-cpe: cpe:/o:redhat:enterprise_linux:8.4:ga notes_plat_sysinfo_575 = notes_plat_sysinfo_580 = uname -a: notes_plat_sysinfo_585 = Linux localhost.localdomain 4.18.0-305.el8.x86_64 #1 SMP Thu Apr 29 08:54:30 EDT 2021 notes_plat_sysinfo_590 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_595 = notes_plat_sysinfo_600 = Kernel self-reported vulnerability status: notes_plat_sysinfo_605 = notes_plat_sysinfo_610 = CVE-2018-12207 (iTLB Multihit): KVM: Mitigation: Split huge pages notes_plat_sysinfo_615 = CVE-2018-3620 (L1 Terminal Fault): Not affected notes_plat_sysinfo_620 = Microarchitectural Data Sampling: Not affected notes_plat_sysinfo_625 = CVE-2017-5754 (Meltdown): Not affected notes_plat_sysinfo_630 = CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store notes_plat_sysinfo_635 = Bypass disabled via prctl and notes_plat_sysinfo_640 = seccomp notes_plat_sysinfo_645 = CVE-2017-5753 (Spectre variant 1): Mitigation: usercopy/swapgs notes_plat_sysinfo_650 = barriers and __user pointer notes_plat_sysinfo_655 = sanitization notes_plat_sysinfo_660 = CVE-2017-5715 (Spectre variant 2): Mitigation: Enhanced IBRS, IBPB: notes_plat_sysinfo_665 = conditional, RSB filling notes_plat_sysinfo_670 = CVE-2020-0543 (Special Register Buffer Data Sampling): Not affected notes_plat_sysinfo_675 = CVE-2019-11135 (TSX Asynchronous Abort): Mitigation: TSX disabled notes_plat_sysinfo_680 = notes_plat_sysinfo_685 = run-level 3 Mar 31 21:35 notes_plat_sysinfo_690 = notes_plat_sysinfo_695 = SPEC is set to: /spec2017 notes_plat_sysinfo_700 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_705 = /dev/sda3 xfs 859G 61G 799G 8% / notes_plat_sysinfo_710 = notes_plat_sysinfo_715 = From /sys/devices/virtual/dmi/id notes_plat_sysinfo_720 = Vendor: XFUSION notes_plat_sysinfo_725 = Product: 5288 V5 notes_plat_sysinfo_730 = Product Family: Purley notes_plat_sysinfo_735 = Serial: Serial notes_plat_sysinfo_740 = notes_plat_sysinfo_745 = Additional information from dmidecode 3.2 follows. WARNING: Use caution when you notes_plat_sysinfo_750 = interpret this section. The 'dmidecode' program reads system data which is "intended to notes_plat_sysinfo_755 = allow hardware to be accurately determined", but the intent may not be met, as there are notes_plat_sysinfo_760 = frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_765 = Memory: notes_plat_sysinfo_770 = 22x Hynix HMA84GR7CJR4N-WM 32 GB 2 rank 2933 notes_plat_sysinfo_775 = 2x Hynix HMA84GR7JJR4N-WM 32 GB 2 rank 2933 notes_plat_sysinfo_780 = notes_plat_sysinfo_785 = BIOS: notes_plat_sysinfo_790 = BIOS Vendor: INSYDE Corp. notes_plat_sysinfo_795 = BIOS Version: 8.23 notes_plat_sysinfo_800 = BIOS Date: 12/30/2021 notes_plat_sysinfo_805 = BIOS Revision: 8.23 notes_plat_sysinfo_810 = notes_plat_sysinfo_815 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon Gold 6230R hw_disk = 859 GB add more disk info here hw_nchips = 2 prepared_by = root (is never output, only tags rawfile) sw_file = xfs sw_os000 = Red Hat Enterprise Linux release 8.4 (Ootpa) sw_os001 = 4.18.0-305.el8.x86_64 sw_state = Run level 3 (add definition here) # End of settings added by sysinfo_program