# Invocation command line: # /home/cpu2017/bin/harness/runcpu --define external --copies 224 --configfile ic18.0u2-lin-core-avx512-rate-20180218.cfg --define smt-on --define cores=112 --define physicalfirst --define invoke_with_interleave --define drop_caches --tune base --output_format all --nopower --runmode rate --tune base --size refrate intrate # output_root was not used for this run ############################################################################ #------------------------------------------------------------------------------ # This is a sample SPEC CPU2017 config file. It is applicable for: # # Compiler name/version: Intel(R) C/C++ and Fortran 18.0u2 Compilers for Linux # Operating system version: Redhat Enterprise Linux 7.4, GLIBC 2.17 # Hardware: Intel(R) processors supporting CORE-AVX512 tuning # # If you wish to build your own: # (1) Copy this to a new name # cd %SPEC%/config # copy this.cfg that.cfg # (2) Change items that are marked 'EDIT' (search for it) # # If you have different software or hardware, this config file may not work. # You may find a better config file for your system next to posted results: # http://www.spec.org/cpu2017/results # # Compiler issues: Contact your compiler vendor, not SPEC. # For SPEC help: http://www.spec.org/auto/cpu2017/Docs/techsupport.html #------------------------------------------------------------------------------ #--------- Preprocessor ------------------------------------------------------- # # Optionally edit if you wish: %define build_ncpus 8 # controls number of simultaneous compiles # Used to date the label %define version 20180218 # Used for the optimization tuning part of the label (not required) %if defined(%{noopt}) %define opt_label -noopt %elif defined(%{medopt}) %define opt_label -medopt %else %define opt_label %endif # Used for labeling static linked builds (not required) %if defined(%{static}) %define static_label -static %else %define static_label %endif #--------- Label -------------------------------------------------------------- # Arbitrary string, tags your binaries & directories. # Two Suggestions: # (1) Change this label as you try new ideas. label = ic18.0u2-lin-core-avx512-rate%{opt_label}%{static_label}-%{version} # (2) Make the label meaningful to YOU. #--------- Global Settings ---------------------------------------------------- # For info, see: # https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname XXX # Example: https://www.spec.org/auto/cpu2017/Docs/config.html#tune ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'label' to track binaries. # ######################################################## # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=0 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # action = validate command_add_redirect = 1 line_width = 1020 log_line_width = 1020 makeflags = -j%{build_ncpus} output_format = txt,cfg,pdf,csv preenv = 1 tune = base bench_post_setup = sync parallel_test = 1 mean_anyway = 1 reportable = 1 copies = 1 #Reference the flags Files flagsurl000=http://www.spec.org/cpu2017/flags/Intel-ic18.0-official-linux64.2017-12-21.xml flagsurl001=http://www.spec.org/cpu2017/flags/Dell-Platform-Flags-PowerEdge14G-revC.xml # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/lib/ia32:$[top]/lib/intel64:$[top]/je5.0.1-32:$[top]/je5.0.1-64 # Affinitization # For UP systems, we need to know if the processors are ordered across cores first or in order # If across cores, processors 0, 1, 2 and 3 are on distinct physical cores # Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores default: submit = numactl --localalloc --physcpubind=$SPECCOPYNUM -- $command %ifdef %{no-numa} submit = taskset -c $SPECCOPYNUM $command %endif #--------- Compilers ---------------------------------------------------------- intrate,fprate: CC = icc -m64 -std=c11 CXX = icpc -m64 FC = ifort -m64 default: # How to say "Show me your version, please" CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version JEMALLOC32_DIR = /usr/local/je5.0.1-32/lib JEMALLOC64_DIR = /usr/local/je5.0.1-64/lib %if !defined(%{static}) JEMALLOC32 = jemalloc JEMALLOC64 = jemalloc %else JEMALLOC32 = libjemalloc.a JEMALLOC64 = libjemalloc.a %endif #--------- Portability -------------------------------------------------------- intrate,fprate: PORTABILITY= -DSPEC_LP64 500.perlbench_r: CPORTABILITY = -DSPEC_LINUX_X64 521.wrf_r: CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY= -convert big_endian 523.xalancbmk_r: CXXPORTABILITY=-DSPEC_LINUX 526.blender_r: CPORTABILITY= -DSPEC_LINUX -funsigned-char 527.cam4_r: CPORTABILITY= -DSPEC_CASE_FLAG #--------- How Many CPUs? ----------------------------------------------------- # Both SPECrate and SPECspeed can test multiple chips / cores / hw threads # - For SPECrate, you set the number of copies. # See: https://www.spec.org/cpu2017/Docs/system-requirements.html#MultipleCPUs # # q. How many should I set? # a. Unknown, you will have to try it and see! # # To get you started, some suggestions: # # copies - This config file defaults to testing only 1 copy. You might # try changing it to match the number of cores on your system, # or perhaps the number of virtual CPUs as reported by: # grep -c processor /proc/cpuinfo # Be sure you have enough memory. See: # https://www.spec.org/cpu2017/Docs/system-requirements.html#memory # default: copies = 1 # EDIT to change number of copies (see above) #-------- Tuning Flags ------------------------------------------------- intspeed,fpspeed: #reconsider using a speed config file instead of a rate config file fail=1 intrate,fprate: SSE = -xCORE-AVX512 EXTRA_FOPTIMIZE = -nostandard-realloc-lhs intrate=default: EXTRA_LIBS = -L$(JEMALLOC64_DIR) -l$(JEMALLOC64) EXTRA_LDFLAGS = -Wl,-z,muldefs intrate=base: %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -ipo -O3 -no-prec-div %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=3 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=3 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=3 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT) %endif %else COPTIMIZE = $(FAST) -qopt-mem-layout-trans=3 CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=3 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=3 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT) -static %endif %endif fprate=base: %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -ipo -O3 -no-prec-div %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 -auto %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT) %endif %else COPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 CXXOPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 FOPTIMIZE = $(FORT_FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 -auto %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT) -static %endif %endif intrate=peak: %if defined(%{noopt}) || defined(%{medopt}) #not building or executing peak against less opt fail=1 %endif PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FAST_PASS1 = $(OPT_ROOT) -static FORT_FAST_PASS1 = $(OPT_ROOT) -static FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FAST_PASS2 = $(SSE) $(OPT_ROOT) -static FORT_FAST_PASS2 = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) PASS1_COPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=3 PASS1_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=3 PASS1_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=3 PASS2_COPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=3 PASS2_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=3 PASS2_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=3 %else PASS1_COPTIMIZE = $(FAST_PASS1) -qopt-mem-layout-trans=3 PASS1_CXXOPTIMIZE = $(FAST_PASS1) -qopt-mem-layout-trans=3 PASS1_FOPTIMIZE = $(FORT_FAST_PASS1) -qopt-mem-layout-trans=3 PASS2_COPTIMIZE = $(FAST_PASS2) -qopt-mem-layout-trans=3 PASS2_CXXOPTIMIZE = $(FAST_PASS2) -qopt-mem-layout-trans=3 PASS2_FOPTIMIZE = $(FORT_FAST_PASS2) -qopt-mem-layout-trans=3 %endif fprate=peak: %if defined(%{noopt}) || defined(%{medopt}) #not building or executing peak against less opt fail=1 %endif PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FAST_PASS1 = $(OPT_ROOT) -static FORT_FAST_PASS1 = $(OPT_ROOT) -static FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FAST_PASS2 = $(SSE) $(OPT_ROOT) -static FORT_FAST_PASS2 = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) PASS1_COPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS1_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS1_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS2_COPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS2_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS2_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 -auto %else PASS1_COPTIMIZE = $(FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS1_CXXOPTIMIZE = $(FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS1_FOPTIMIZE = $(FORT_FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS2_COPTIMIZE = $(FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS2_CXXOPTIMIZE = $(FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS2_FOPTIMIZE = $(FORT_FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 -auto %endif #some benchmarks do not want to share a core #%ifdef %{smt-on} #%define numpeakcopies %{cores} #502.gcc_r,505.mcf_r,548.exchange2_r=peak: # copies = %{numpeakcopies} # #503.bwaves_r,510.parest_r,521.wrf_r,527.cam4_r,538.imagick_r=peak: # copies = %{numpeakcopies} #%endif 500.perlbench_r=peak=default: #[56]00.perlbench[rs] has non standard signed overflow EXTRA_OPTIMIZE = -fno-strict-overflow 525.x264_r=peak: EXTRA_OPTIMIZE = -fno-alias 502.gcc_r,523.xalancbmk_r=peak: CC = icc -m32 -std=c11 -L/home/prasadj/specdev/IC18u2_Internal/lin_18_0_20180210/compiler/lib/ia32_lin CXX = icpc -m32 -L/home/prasadj/specdev/IC18u2_Internal/lin_18_0_20180210/compiler/lib/ia32_lin FC = ifort -m32 -L/home/prasadj/specdev/IC18u2_Internal/lin_18_0_20180210/compiler/lib/ia32_lin EXTRA_LIBS = -L$(JEMALLOC32_DIR) -l$(JEMALLOC32) EXTRA_LDFLAGS = -Wl,-z,muldefs #Change portability for 32b, large file support for safety PORTABILITY = -D_FILE_OFFSET_BITS=64 #fp rate subset for removing FDO #503.bwaves_r,507.cactuBSSN_r,510.parest_r,526.blender_r,538.imagick_r,549.fotonik3d_r=peak=default: # feedback = 0 # OPT_ROOT = -ipo -O3 -no-prec-div # # FAST_NO_STATIC = $(SSE) $(OPT_ROOT) # FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) # FAST = $(SSE) $(OPT_ROOT) -static # FORT_FAST = $(SSE) $(OPT_ROOT) -static # #%if !defined(%{static}) # COPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 # CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 # FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 #%if defined(%{noopt}) # COPTIMIZE = $(OPT_ROOT) # CXXOPTIMIZE = $(OPT_ROOT) # FOPTIMIZE = $(OPT_ROOT) #%endif #%else # COPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 # CXXOPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 # FOPTIMIZE = $(FORT_FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 #%if defined(%{noopt}) # COPTIMIZE = $(OPT_ROOT) -static # CXXOPTIMIZE = $(OPT_ROOT) -static # FOPTIMIZE = $(OPT_ROOT) -static #%endif #%endif #------------------------------------------------------------------------------- # Tester and System Descriptions - EDIT the sections below #------------------------------------------------------------------------------- # For info about any field, see # https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname # Example: https://www.spec.org/auto/cpu2017/Docs/config.html#hw_memory #------------------------------------------------------------------------------- #--------- If you install new compilers, EDIT this section -------------------- intrate,intspeed,fpspeed,fprate: sw_compiler000 = C/C++: Version 18.0.2.20180210 of Intel C/C++ sw_compiler001 = Compiler for Linux; sw_compiler002 = Fortran: Version 18.0.2.20180210 of Intel Fortran sw_compiler003 = Compiler for Linux sw_base_ptrsize = 64-bit fprate,fpspeed: sw_peak_ptrsize = 64-bit intrate,intspeed: sw_peak_ptrsize = 32/64-bit sw_other = jemalloc memory allocator library, version 5.0.1 #--------- EDIT Your info --------------------------------------------------------- # To understand the difference between hw_vendor/sponsor/tester, see: # www.spec.org/auto/cpu2017/Docs/config.html#test_sponsor intrate,intspeed,fprate,fpspeed: # Important: keep this line hw_vendor = Dell Inc. tester = Dell Inc. test_sponsor = Dell Inc. license_num = 55 prepared_by = Dell Inc. #--------- EDIT system availability dates and system information ---------------------------------------------- intrate,intspeed,fprate,fpspeed: # Important: keep this line # Example # Brief info about field fw_bios = Version 1.0.0 released Mar-2018 hw_avail = May-2018 # Date of LAST hardware component to ship sw_avail = Apr-2018 # Date of LAST software component to ship hw_cpu_nominal_mhz = 2100 hw_cpu_max_mhz = 3800 hw_ncores = 112 hw_nthreadspercore = 2 hw_ncpuorder = 2,4 chips hw_model000 = PowerEdge R840 (Intel Xeon Platinum 8176, hw_model001 = 2.10 GHz) hw_other = None # Other perf-relevant hw, or "None" hw_pcache = 32 KB I + 32 KB D on chip per core # Primary cache size, type, location hw_scache = 1 MB I+D on chip per core # Second cache or "None" hw_tcache = 38.5 MB I+D on chip per chip hw_ocache = None # Other cache or "None" #--------- Sysinfo fields - You may need to adjust this section --------------- # Note: Some commented-out fields above are automatically set to preliminary # values by sysinfo # www.spec.org/auto/cpu2017/Docs/config.html#sysinfo # Uncomment lines for which you already have a better answer than sysinfo # intrate,intspeed,fprate,fpspeed: # Important: keep this line # Example # Brief info about field hw_cpu_name = Intel Xeon Platinum 8176 hw_disk = 1 x 960 GB SATA SSD sw_state = Run level 3 (multi-user) hw_memory000 = 768 GB (48 x 16 GB 2Rx8 PC4-2666V-R) hw_nchips = 4 # number chips enabled sw_file = xfs # File system sw_os000 = SUSE Linux Enterprise Server 12 SP3 sw_os001 = 4.4.114-94.11-default #--------- EDIT Intel Recommended Fields - You may wish to adjust this section ----- default: notes_015 = Binaries compiled on a system with 1x Intel Core i7-4790 CPU + 32GB RAM notes_020 = memory using Redhat Enterprise Linux 7.4 notes_025 = Yes: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_030 =is mitigated in the system as tested and documented. notes_035 = Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre notes_040 =variant 1) is mitigated in the system as tested and documented. notes_045 = Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre notes_050 =variant 2) is mitigated in the system as tested and documented. notes_jemalloc_000 = jemalloc, a general purpose malloc implementation notes_jemalloc_005 = built with the RedHat Enterprise 7.4, and the system compiler gcc 4.8.5 notes_jemalloc_010 = sources available from jemalloc.net or https://github.com/jemalloc/jemalloc/releases notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" notes_plat_form_000 = BIOS settings: notes_plat_form_005 = Sub NUMA Cluster enabled notes_plat_form_010 = Virtualization Technology disabled notes_plat_form_015 = System Profile set to Custom notes_plat_form_020 = CPU Performance set to Maximum Performance notes_plat_form_025 = C States set to Autonomous notes_plat_form_030 = C1E disabled notes_plat_form_035 = Uncore Frequency set to Dynamic notes_plat_form_040 = Energy Efficiency Policy set to Performance notes_plat_form_045 = Memory Patrol Scrub disabled notes_plat_form_050 = Logical Processor enabled notes_plat_form_055 = CPU Interconnect Bus Link Power Management disabled notes_plat_form_060 = PCI ASPM L1 Link Power Management disabled #Ease of tagging results from the runcpu command line with commands run outside of runcpu harneess #Adjust as necessary for your SUT %if defined(%{THP_enabled}) notes_200 = Transparent Huge Pages enabled with: notes_201 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %elif defined(%{THP_disabled}) notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %else notes_055 = Transparent Huge Pages enabled by default %endif %ifdef %{drop_caches} notes_060 = Prior to runcpu invocation notes_065 = Filesystem page cache synced and cleared with: notes_070 = sync; echo 3> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_075 = runcpu command invoked through numactl i.e.: notes_080 = numactl --interleave=all runcpu %endif intrate,fprate: %if defined(%{no-numa}) notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %else notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_010 = For details, please see the config file. %endif # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:ecd2bef08f316af97f5a7768b641e2a3307c1b4b68efb5a57fa76367d790d233) default: notes_plat_sysinfo_000 = Sysinfo program /home/cpu2017/bin/sysinfo notes_plat_sysinfo_005 = Rev: r5797 of 2017-06-14 96c45e4568ad54c135fd618bcc091c0f notes_plat_sysinfo_010 = running on linux-akdf Wed May 9 11:52:11 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_025 = For more information on this section, see notes_plat_sysinfo_030 = https://www.spec.org/cpu2017/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) Platinum 8176 CPU @ 2.10GHz notes_plat_sysinfo_050 = 4 "physical id"s (chips) notes_plat_sysinfo_055 = 224 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The following notes_plat_sysinfo_065 = excerpts from /proc/cpuinfo might not be reliable. Use with caution.) notes_plat_sysinfo_070 = cpu cores : 28 notes_plat_sysinfo_075 = siblings : 56 notes_plat_sysinfo_080 = physical 0: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24 25 26 27 notes_plat_sysinfo_085 = 28 29 30 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24 25 26 27 notes_plat_sysinfo_095 = 28 29 30 notes_plat_sysinfo_100 = physical 2: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24 25 26 27 notes_plat_sysinfo_105 = 28 29 30 notes_plat_sysinfo_110 = physical 3: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24 25 26 27 notes_plat_sysinfo_115 = 28 29 30 notes_plat_sysinfo_120 = notes_plat_sysinfo_125 = From lscpu: notes_plat_sysinfo_130 = Architecture: x86_64 notes_plat_sysinfo_135 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_140 = Byte Order: Little Endian notes_plat_sysinfo_145 = CPU(s): 224 notes_plat_sysinfo_150 = On-line CPU(s) list: 0-223 notes_plat_sysinfo_155 = Thread(s) per core: 2 notes_plat_sysinfo_160 = Core(s) per socket: 28 notes_plat_sysinfo_165 = Socket(s): 4 notes_plat_sysinfo_170 = NUMA node(s): 8 notes_plat_sysinfo_175 = Vendor ID: GenuineIntel notes_plat_sysinfo_180 = CPU family: 6 notes_plat_sysinfo_185 = Model: 85 notes_plat_sysinfo_190 = Model name: Intel(R) Xeon(R) Platinum 8176 CPU @ 2.10GHz notes_plat_sysinfo_195 = Stepping: 4 notes_plat_sysinfo_200 = CPU MHz: 2095.077 notes_plat_sysinfo_205 = BogoMIPS: 4190.15 notes_plat_sysinfo_210 = Virtualization: VT-x notes_plat_sysinfo_215 = L1d cache: 32K notes_plat_sysinfo_220 = L1i cache: 32K notes_plat_sysinfo_225 = L2 cache: 1024K notes_plat_sysinfo_230 = L3 cache: 39424K notes_plat_sysinfo_235 = NUMA node0 CPU(s): notes_plat_sysinfo_240 = 0,8,16,24,32,40,48,56,64,72,80,88,96,104,112,120,128,136,144,152,160,168,176,184,192 notes_plat_sysinfo_245 = ,200,208,216 notes_plat_sysinfo_250 = NUMA node1 CPU(s): notes_plat_sysinfo_255 = 1,9,17,25,33,41,49,57,65,73,81,89,97,105,113,121,129,137,145,153,161,169,177,185,193 notes_plat_sysinfo_260 = ,201,209,217 notes_plat_sysinfo_265 = NUMA node2 CPU(s): notes_plat_sysinfo_270 = 2,10,18,26,34,42,50,58,66,74,82,90,98,106,114,122,130,138,146,154,162,170,178,186,19 notes_plat_sysinfo_275 = 4,202,210,218 notes_plat_sysinfo_280 = NUMA node3 CPU(s): notes_plat_sysinfo_285 = 3,11,19,27,35,43,51,59,67,75,83,91,99,107,115,123,131,139,147,155,163,171,179,187,19 notes_plat_sysinfo_290 = 5,203,211,219 notes_plat_sysinfo_295 = NUMA node4 CPU(s): notes_plat_sysinfo_300 = 4,12,20,28,36,44,52,60,68,76,84,92,100,108,116,124,132,140,148,156,164,172,180,188,1 notes_plat_sysinfo_305 = 96,204,212,220 notes_plat_sysinfo_310 = NUMA node5 CPU(s): notes_plat_sysinfo_315 = 5,13,21,29,37,45,53,61,69,77,85,93,101,109,117,125,133,141,149,157,165,173,181,189,1 notes_plat_sysinfo_320 = 97,205,213,221 notes_plat_sysinfo_325 = NUMA node6 CPU(s): notes_plat_sysinfo_330 = 6,14,22,30,38,46,54,62,70,78,86,94,102,110,118,126,134,142,150,158,166,174,182,190,1 notes_plat_sysinfo_335 = 98,206,214,222 notes_plat_sysinfo_340 = NUMA node7 CPU(s): notes_plat_sysinfo_345 = 7,15,23,31,39,47,55,63,71,79,87,95,103,111,119,127,135,143,151,159,167,175,183,191,1 notes_plat_sysinfo_350 = 99,207,215,223 notes_plat_sysinfo_355 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov notes_plat_sysinfo_360 = pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp notes_plat_sysinfo_365 = lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc notes_plat_sysinfo_370 = aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg notes_plat_sysinfo_375 = fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes notes_plat_sysinfo_380 = xsave avx f16c rdrand lahf_lm abm 3dnowprefetch ida arat epb invpcid_single pln pts notes_plat_sysinfo_385 = dtherm intel_pt rsb_ctxsw spec_ctrl retpoline kaiser tpr_shadow vnmi flexpriority notes_plat_sysinfo_390 = ept vpid fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm cqm mpx notes_plat_sysinfo_395 = avx512f avx512dq rdseed adx smap clflushopt clwb avx512cd avx512bw avx512vl xsaveopt notes_plat_sysinfo_400 = xsavec xgetbv1 cqm_llc cqm_occup_llc pku ospke notes_plat_sysinfo_405 = notes_plat_sysinfo_410 = /proc/cpuinfo cache data notes_plat_sysinfo_415 = cache size : 39424 KB notes_plat_sysinfo_420 = notes_plat_sysinfo_425 = From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a notes_plat_sysinfo_430 = physical chip. notes_plat_sysinfo_435 = available: 8 nodes (0-7) notes_plat_sysinfo_440 = node 0 cpus: 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120 128 136 144 152 160 168 notes_plat_sysinfo_445 = 176 184 192 200 208 216 notes_plat_sysinfo_450 = node 0 size: 95230 MB notes_plat_sysinfo_455 = node 0 free: 95038 MB notes_plat_sysinfo_460 = node 1 cpus: 1 9 17 25 33 41 49 57 65 73 81 89 97 105 113 121 129 137 145 153 161 169 notes_plat_sysinfo_465 = 177 185 193 201 209 217 notes_plat_sysinfo_470 = node 1 size: 96760 MB notes_plat_sysinfo_475 = node 1 free: 96603 MB notes_plat_sysinfo_480 = node 2 cpus: 2 10 18 26 34 42 50 58 66 74 82 90 98 106 114 122 130 138 146 154 162 170 notes_plat_sysinfo_485 = 178 186 194 202 210 218 notes_plat_sysinfo_490 = node 2 size: 96760 MB notes_plat_sysinfo_495 = node 2 free: 96599 MB notes_plat_sysinfo_500 = node 3 cpus: 3 11 19 27 35 43 51 59 67 75 83 91 99 107 115 123 131 139 147 155 163 171 notes_plat_sysinfo_505 = 179 187 195 203 211 219 notes_plat_sysinfo_510 = node 3 size: 96760 MB notes_plat_sysinfo_515 = node 3 free: 96594 MB notes_plat_sysinfo_520 = node 4 cpus: 4 12 20 28 36 44 52 60 68 76 84 92 100 108 116 124 132 140 148 156 164 172 notes_plat_sysinfo_525 = 180 188 196 204 212 220 notes_plat_sysinfo_530 = node 4 size: 96760 MB notes_plat_sysinfo_535 = node 4 free: 96603 MB notes_plat_sysinfo_540 = node 5 cpus: 5 13 21 29 37 45 53 61 69 77 85 93 101 109 117 125 133 141 149 157 165 173 notes_plat_sysinfo_545 = 181 189 197 205 213 221 notes_plat_sysinfo_550 = node 5 size: 96760 MB notes_plat_sysinfo_555 = node 5 free: 96593 MB notes_plat_sysinfo_560 = node 6 cpus: 6 14 22 30 38 46 54 62 70 78 86 94 102 110 118 126 134 142 150 158 166 174 notes_plat_sysinfo_565 = 182 190 198 206 214 222 notes_plat_sysinfo_570 = node 6 size: 96760 MB notes_plat_sysinfo_575 = node 6 free: 96597 MB notes_plat_sysinfo_580 = node 7 cpus: 7 15 23 31 39 47 55 63 71 79 87 95 103 111 119 127 135 143 151 159 167 175 notes_plat_sysinfo_585 = 183 191 199 207 215 223 notes_plat_sysinfo_590 = node 7 size: 96758 MB notes_plat_sysinfo_595 = node 7 free: 96582 MB notes_plat_sysinfo_600 = node distances: notes_plat_sysinfo_605 = node 0 1 2 3 4 5 6 7 notes_plat_sysinfo_610 = 0: 10 21 21 21 11 21 21 21 notes_plat_sysinfo_615 = 1: 21 10 21 21 21 11 21 21 notes_plat_sysinfo_620 = 2: 21 21 10 21 21 21 11 21 notes_plat_sysinfo_625 = 3: 21 21 21 10 21 21 21 11 notes_plat_sysinfo_630 = 4: 11 21 21 21 10 21 21 21 notes_plat_sysinfo_635 = 5: 21 11 21 21 21 10 21 21 notes_plat_sysinfo_640 = 6: 21 21 11 21 21 21 10 21 notes_plat_sysinfo_645 = 7: 21 21 21 11 21 21 21 10 notes_plat_sysinfo_650 = notes_plat_sysinfo_655 = From /proc/meminfo notes_plat_sysinfo_660 = MemTotal: 791093060 kB notes_plat_sysinfo_665 = HugePages_Total: 0 notes_plat_sysinfo_670 = Hugepagesize: 2048 kB notes_plat_sysinfo_675 = notes_plat_sysinfo_680 = /usr/bin/lsb_release -d notes_plat_sysinfo_685 = SUSE Linux Enterprise Server 12 SP3 notes_plat_sysinfo_690 = notes_plat_sysinfo_695 = From /etc/*release* /etc/*version* notes_plat_sysinfo_700 = SuSE-release: notes_plat_sysinfo_705 = SUSE Linux Enterprise Server 12 (x86_64) notes_plat_sysinfo_710 = VERSION = 12 notes_plat_sysinfo_715 = PATCHLEVEL = 3 notes_plat_sysinfo_720 = # This file is deprecated and will be removed in a future service pack or release. notes_plat_sysinfo_725 = # Please check /etc/os-release for details about this release. notes_plat_sysinfo_730 = os-release: notes_plat_sysinfo_735 = NAME="SLES" notes_plat_sysinfo_740 = VERSION="12-SP3" notes_plat_sysinfo_745 = VERSION_ID="12.3" notes_plat_sysinfo_750 = PRETTY_NAME="SUSE Linux Enterprise Server 12 SP3" notes_plat_sysinfo_755 = ID="sles" notes_plat_sysinfo_760 = ANSI_COLOR="0;32" notes_plat_sysinfo_765 = CPE_NAME="cpe:/o:suse:sles:12:sp3" notes_plat_sysinfo_770 = notes_plat_sysinfo_775 = uname -a: notes_plat_sysinfo_780 = Linux linux-akdf 4.4.114-94.11-default #1 SMP Thu Feb 1 19:28:26 UTC 2018 (4309ff9) notes_plat_sysinfo_785 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_790 = notes_plat_sysinfo_795 = run-level 3 May 9 11:44 notes_plat_sysinfo_800 = notes_plat_sysinfo_805 = SPEC is set to: /home/cpu2017 notes_plat_sysinfo_810 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_815 = /dev/sda4 xfs 852G 20G 833G 3% /home notes_plat_sysinfo_820 = notes_plat_sysinfo_825 = Additional information from dmidecode follows. WARNING: Use caution when you interpret notes_plat_sysinfo_830 = this section. The 'dmidecode' program reads system data which is "intended to allow notes_plat_sysinfo_835 = hardware to be accurately determined", but the intent may not be met, as there are notes_plat_sysinfo_840 = frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_845 = BIOS Dell Inc. 1.0.0 03/20/2018 notes_plat_sysinfo_850 = Memory: notes_plat_sysinfo_855 = 36x 00AD00B300AD HMA82GR7AFR8N-VK 16 GB 2 rank 2666 notes_plat_sysinfo_860 = 6x 00AD063200AD HMA82GR7AFR8N-VK 16 GB 2 rank 2666 notes_plat_sysinfo_865 = 6x 00CE063200CE M393A2K43BB1-CTD 16 GB 2 rank 2666 notes_plat_sysinfo_870 = notes_plat_sysinfo_875 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon Platinum 8176 hw_disk = 852 GB add more disk info here hw_memory001 = 754.445 GB fixme: If using DDR3, format is: hw_nchips = 4 prepared_by = root (is never output, only tags rawfile) sw_file = xfs sw_os001 = SUSE Linux Enterprise Server 12 SP3 sw_os002 = 4.4.114-94.11-default sw_state = Run level 3 (add definition here) # End of settings added by sysinfo_program # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: notes_000 =Environment variables set by runcpu before the start of the run: notes_005 =LD_LIBRARY_PATH = "/home/cpu2017/lib/ia32:/home/cpu2017/lib/intel64:/home/cpu2017/je5.0.1-32:/home/cpu2017/je5.0.1-64" notes_010 =