| CPU2006 license: | 22 | Test date: | Feb-2007 |
|---|---|---|---|
| Test sponsor: | Fujitsu Siemens Computers | Hardware Availability: | Jan-2007 |
| Tested by: | Fujitsu Siemens Computers | Software Availability: | Nov-2006 |
| Hardware | |
|---|---|
| CPU Name: | Intel Xeon X5355 |
| CPU Characteristics: | X5355 |
| CPU MHz: | 2666 |
| FPU: | Integrated |
| CPU(s) enabled: | 8 cores, 2 chips, 4 cores/chip |
| CPU(s) orderable: | 1,2 chips |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 8 MB I+D on chip per chip, 4 MB shared / 2 cores |
| L3 Cache: | None |
| Other Cache: | None |
| Memory: | 16 GB (8x2 GB DDR2 PC2-5300F, 2 rank, CAS 5-5-5, with ECC) |
| Disk Subsystem: | SAS (73GB 15400 rpm) |
| Other Hardware: | None |
| Software | |
|---|---|
| Operating System: | 64-Bit SUSE LINUX Enterprise Server 10, Kernel 2.6.16.21-0.8-smp on an x86_64 |
| Compiler: | Intel C++ Compiler for Linux64 EM64T version 9.1 Build 20061101, Package-ID l_cc_p_9.1.045 Intel Fortran Compiler for Linux64 EM64T version 9.1 Build 20061101 Package ID: l_fc_p_9.1.040 |
| Auto Parallel: | No |
| File System: | ReiserFS |
| System State: | Default |
| Base Pointers: | 64-bit |
| Peak Pointers: | 64-bit |
| Other Software: | None |
Results Table
| Benchmark | Base | Peak | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
| 410.bwaves | 8 | 3240 | 33.6 | 3240 | 33.6 | 3238 | 33.6 | 8 | 3238 | 33.6 | 3238 | 33.6 | 3237 | 33.6 |
| 416.gamess | 8 | 1071 | 146 | 1071 | 146 | 1071 | 146 | 8 | 1071 | 146 | 1071 | 146 | 1071 | 146 |
| 433.milc | 8 | 2407 | 30.5 | 2403 | 30.6 | 2408 | 30.5 | 8 | 2407 | 30.5 | 2403 | 30.6 | 2408 | 30.5 |
| 434.zeusmp | 8 | 1204 | 60.4 | 1205 | 60.4 | 1219 | 59.7 | 8 | 1204 | 60.4 | 1205 | 60.4 | 1219 | 59.7 |
| 435.gromacs | 8 | 476 | 120 | 478 | 119 | 476 | 120 | 8 | 459 | 124 | 459 | 124 | 459 | 124 |
| 436.cactusADM | 8 | 1403 | 68.1 | 1407 | 68.0 | 1400 | 68.3 | 8 | 1403 | 68.1 | 1407 | 68.0 | 1400 | 68.3 |
| 437.leslie3d | 8 | 3086 | 24.4 | 3091 | 24.3 | 3101 | 24.3 | 8 | 3086 | 24.4 | 3091 | 24.3 | 3101 | 24.3 |
| 444.namd | 8 | 579 | 111 | 578 | 111 | 578 | 111 | 8 | 579 | 111 | 578 | 111 | 578 | 111 |
| 447.dealII | 8 | 754 | 121 | 771 | 119 | 750 | 122 | 8 | 740 | 124 | 746 | 123 | 744 | 123 |
| 450.soplex | 8 | 2018 | 33.1 | 2022 | 33.0 | 2017 | 33.1 | 8 | 2018 | 33.1 | 2022 | 33.0 | 2017 | 33.1 |
| 453.povray | 8 | 290 | 147 | 290 | 147 | 288 | 148 | 8 | 220 | 193 | 220 | 193 | 220 | 193 |
| 454.calculix | 8 | 665 | 99.2 | 661 | 99.8 | 655 | 101 | 8 | 630 | 105 | 653 | 101 | 642 | 103 |
| 459.GemsFDTD | 8 | 3461 | 24.5 | 3461 | 24.5 | 3461 | 24.5 | 8 | 3461 | 24.5 | 3461 | 24.5 | 3461 | 24.5 |
| 465.tonto | 8 | 1044 | 75.4 | 1037 | 75.9 | 1042 | 75.5 | 8 | 1019 | 77.3 | 1014 | 77.7 | 1029 | 76.5 |
| 470.lbm | 8 | 4493 | 24.5 | 4493 | 24.5 | 4493 | 24.5 | 8 | 4493 | 24.5 | 4493 | 24.5 | 4493 | 24.5 |
| 481.wrf | 8 | 1945 | 45.9 | 1948 | 45.9 | 1944 | 46.0 | 8 | 1945 | 45.9 | 1948 | 45.9 | 1944 | 46.0 |
| 482.sphinx3 | 8 | 3112 | 50.1 | 3117 | 50.0 | 3115 | 50.1 | 8 | 3112 | 50.1 | 3117 | 50.0 | 3115 | 50.1 |
Operating System Notes
'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run
General Notes
The PRIMERGY RX300 S3 and the PRIMERGY TX300 S3 are electronically equivalent. The system bus runs at 1333 MHz BIOS configuration: Hardware Prefetch = Disable, Adjacent Sector Prefetch = Disable For information about Fujitsu Siemens Computers in your country please see: http://www.fujitsu-siemens.com/countries
Base Compiler Invocation
C benchmarks:
| icc |
C++ benchmarks:
| icpc |
Fortran benchmarks:
| ifort |
Benchmarks using both Fortran and C:
| icc ifort |
Base Portability Flags
| 410.bwaves: | -DSPEC_CPU_LP64 |
| 416.gamess: | -DSPEC_CPU_LP64 |
| 433.milc: | -DSPEC_CPU_LP64 |
| 434.zeusmp: | -DSPEC_CPU_LP64 |
| 435.gromacs: | -DSPEC_CPU_LP64 -nofor_main |
| 436.cactusADM: | -DSPEC_CPU_LP64 -nofor_main |
| 437.leslie3d: | -DSPEC_CPU_LP64 |
| 444.namd: | -DSPEC_CPU_LP64 |
| 447.dealII: | -DSPEC_CPU_LP64 |
| 450.soplex: | -DSPEC_CPU_LP64 |
| 453.povray: | -DSPEC_CPU_LP64 |
| 454.calculix: | -DSPEC_CPU_LP64 -nofor_main |
| 459.GemsFDTD: | -DSPEC_CPU_LP64 |
| 465.tonto: | -DSPEC_CPU_LP64 |
| 470.lbm: | -DSPEC_CPU_LP64 |
| 481.wrf: | -DSPEC_CPU_LP64 -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX |
| 482.sphinx3: | -DSPEC_CPU_LP64 |
Base Optimization Flags
C benchmarks:
| -fast |
C++ benchmarks:
| -fast |
Fortran benchmarks:
| -fast |
Benchmarks using both Fortran and C:
| -fast |
Peak Compiler Invocation
C benchmarks:
| icc |
C++ benchmarks:
| icpc |
Fortran benchmarks:
| ifort |
Benchmarks using both Fortran and C:
| icc ifort |
Peak Portability Flags
Same as Base Portability Flags
Peak Optimization Flags
C benchmarks:
| 433.milc: | basepeak = yes |
| 470.lbm: | basepeak = yes |
| 482.sphinx3: | basepeak = yes |
C++ benchmarks:
| 444.namd: | basepeak = yes |
| 447.dealII: | -prof_gen(pass 1) -prof_use(pass 2) -fast |
| 450.soplex: | basepeak = yes |
| 453.povray: | Same as 447.dealII |
Fortran benchmarks:
| 410.bwaves: | -prof_gen(pass 1) -prof_use(pass 2) -fast |
| 416.gamess: | basepeak = yes |
| 434.zeusmp: | basepeak = yes |
| 437.leslie3d: | basepeak = yes |
| 459.GemsFDTD: | basepeak = yes |
| 465.tonto: | Same as 410.bwaves |
Benchmarks using both Fortran and C:
| 435.gromacs: | -prof_gen(pass 1) -prof_use(pass 2) -fast |
| 436.cactusADM: | basepeak = yes |
| 454.calculix: | Same as 435.gromacs |
| 481.wrf: | basepeak = yes |