# Invocation command line:
# /cpu2006/bin/runspec -c cpu2006.1.0.ic91.linux64.intel64.Jan082007 -T all --input ref -n 3 --rate 8 -o all fp
# output_root was not used for this run
############################################################################
########################################################
# SPEC CPU2006 Intel Linux x64 (64-bit) config file    #
# Jan 8 2007 Intel Compiler 9.1 for Linux x64 Intel64 #
########################################################

action      = validate
tune        = base or peak
ext         = cpu2006.1.0.ic91.linux64.intel64.Jan082007
PATHSEP     = /
flagsurl000 = http://www.spec.org/cpu2006/flags/CPU2006_flags.20090715.18.xml

check_md5   = 1
mean_anyway = 1
reportable  = 1

#include: SUT.inc
#  ----- Begin inclusion of 'SUT.inc'
############################################################################
# File to be included into config file for SPEC CPU2006

# This include file specifies the "System Under Test" (Hardware,
# OS, BIOS, etc.)
# Any information about the binaries is elsewhere.

# To avoid conflicts in the numbering of the notes,
# please use only 900 and higher numbers.

#######################################################################
# System information                                                  #
# If some remarks about BIOS or Firmware are needed, place them here. #
####################################################################### 

default=default=default=default:
notes_os_000= 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run
notes_000=
notes_005 = The PRIMERGY RX300 S3 and the PRIMERGY TX300 S3 are electronically equivalent.
notes_010 =
notes_015= The system bus runs at 1333 MHz
notes_020=
notes_025= BIOS configuration:
notes_030= Hardware Prefetch = Disable, Adjacent Sector Prefetch = Disable
notes_035=

###################################
# About Fujitsu Siemens Computers #
###################################

default=default=default=default:
notes_040=
notes_045= For information about Fujitsu Siemens Computers in your country please see:
notes_050= http://www.fujitsu-siemens.com/countries

#####################################
# Description Hardware and Software #
#####################################

default=default=default=default:
hw_vendor          = Fujitsu Siemens Computers
hw_model000        = PRIMERGY RX300 S3, Intel Xeon processor X5355,
hw_model001 = 2.66 GHz
hw_cpu_name        = Intel Xeon X5355
hw_cpu_char        = X5355
hw_cpu_mhz         = 2666
hw_fpu             = Integrated
#
hw_nchips          = 2
hw_ncores          = 8
hw_ncoresperchip   = 4
hw_nthreadspercore = 1
#
hw_ncpuorder       = 1,2 chips
hw_pcache          = 32 KB I + 32 KB D on chip per core
hw_scache          = 8 MB I+D on chip per chip, 4 MB shared / 2 cores
hw_tcache          = None
hw_ocache          = None
hw_memory000       = 16 GB (8x2 GB DDR2 PC2-5300F, 2 rank, CAS 5-5-5,
hw_memory001 = with ECC)
hw_disk            = SAS (73GB 15400 rpm)
hw_other           = None

sw_file            = ReiserFS
sw_state           = Default

license_num        = 22
test_sponsor       = Fujitsu Siemens Computers
tester             = Fujitsu Siemens Computers
test_date          = Feb-2007
hw_avail           = Jan-2007
prepared_by        = Fujitsu Siemens Computers
config             = cpu2006.1.0.ic91.linux64.intel64.Jan082006.cfg
# ---- End inclusion of '/cpu2006/config/SUT.inc'

default=default=default=default:
CC  = icc
CXX = icpc
F77 = ifort
FC  = ifort
OBJ = .o

###########################
# portability & libraries #
###########################

default:
PORTABILITY = -DSPEC_CPU_LP64

400.perlbench=default:
CPORTABILITY = -DSPEC_CPU_LINUX_X64

403.gcc=default:
EXTRA_CFLAGS = -Dalloca=_alloca

462.libquantum=default:
CPORTABILITY = -DSPEC_CPU_LINUX

483.xalancbmk=default:
CXXPORTABILITY = -DSPEC_CPU_LINUX

435.gromacs=default:
LDPORTABILITY = -nofor_main

436.cactusADM=default:
LDPORTABILITY = -nofor_main

454.calculix=default:
LDPORTABILITY = -nofor_main

481.wrf=default:
CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX

#########################
# Baseline Tuning Flags #
#########################

default=base=default=default:
OPTIMIZE= -fast

#####################
# Peak Tuning Flags #
#####################

default=peak=default=default:
OPTIMIZE= -fast

PASS1_CFLAGS   = -prof_gen
PASS2_CFLAGS   = -prof_use
PASS1_FFLAGS   = -prof_gen
PASS2_FFLAGS   = -prof_use
PASS1_CXXFLAGS = -prof_gen
PASS2_CXXFLAGS = -prof_use
PASS1_LDFLAGS  = -prof_gen
PASS2_LDFLAGS  = -prof_use

401.bzip2=peak=default=default:
basepeak=yes

462.libquantum=peak=default=default:
basepeak=yes

483.xalancbmk=peak=default=default:
basepeak=yes

416.gamess=peak=default=default:
basepeak=yes

433.milc=peak=default=default:
basepeak=yes

434.zeusmp=peak=default=default:
basepeak=yes

436.cactusADM=peak=default=default:
basepeak=yes

437.leslie3d=peak=default=default:
basepeak=yes

444.namd=peak=default=default:
basepeak=yes

450.soplex=peak=default=default:
basepeak=yes

459.GemsFDTD=peak=default=default:
basepeak=yes

470.lbm=peak=default=default:
basepeak=yes

481.wrf=peak=default=default:
basepeak=yes

482.sphinx3=peak=default=default:
basepeak=yes

#########################
# Used Compilers and OS #
#########################

fp=default=default=default:
sw_compiler000   = Intel C++ Compiler for Linux64 EM64T version 9.1
sw_compiler001   = Build 20061101, Package-ID l_cc_p_9.1.045
sw_compiler002   = Intel Fortran Compiler for Linux64 EM64T version
sw_compiler003   = 9.1
sw_compiler004 = Build 20061101 Package ID: l_fc_p_9.1.040

default=default=default=default:
sw_other         = None
sw_os000         = 64-Bit SUSE LINUX Enterprise Server 10, Kernel
sw_os001 = 2.6.16.21-0.8-smp on an x86_64
sw_avail         = Nov-2006
sw_auto_parallel = No
sw_base_ptrsize  = 64-bit
sw_peak_ptrsize  = 64-bit