Platform Settings File

Firmware / BIOS / Microcode Settings

One or more of the following settings may have been set. If so, the "Platform Note" section of the report will say so; and you can read below to find out more detail about what these settings mean.

PowerNow: (Default = Enabled)

This feature Enables/Disables the PowerNow feature of the processor

C1E: (Default = Enabled)

This feature Enables/Disables the C1E feature of the processor

Fan Speed Control Mode: (Default = Balanced / BL)

This feature allows user to select the fan cooling solution for the system. Values for this BIOS option can be:

• Full Speed: Provides the maximum efficient solution by configuring fan speeds to the maximum required to proovide adequate cooling.
• Performance: Provides the better efficient solution by configuring fan speeds to the better required to provide adequate cooling.
• Balanced: Provides the balanced efficient solution by configuring fan speeds to the balanced required to provide adequate cooling and Energy Saving.
• Energy Saving.: Provides the lower power and lower Noise