Document Title: install_guide_nt.txt Subject: Installing SPEC CPU2000 Under Windows NT or Windows 2000 Last updated: 31 Oct 2000 10:00pm jh (To check for possible updates to this document, please see http://www.spec.org/osg/cpu2000 ) ------------------------------------------------------------------------ Contents -------- - Installation Steps - Using Text Files on NT - Example Installation Note: Unless otherwise specified, refererences to "Windows NT" in this document apply to both Windows NT V4.0 and Windows 2000. Installation Steps ------------------ The SPEC CPU2000 suite has been tested under both Unix and NT systems. Your CD can be installed under either type of operating system. The installation procedure for NT is as follows: 1) Review the hardware and software requirements. If your CD is mounted on drive E:, you can review them by starting Windows Explorer and double-clicking on: E:\docs.nt\system_requirements.txt 2) Open a Command Prompt ("MSDOS") window. To do this under NT4.0, select Start--->Programs--->Command Prompt. Under Windows 2000, select Start--->Programs--->Accessories--->Command Prompt. Adjust the properties to allow you to see plenty of lines scrolled off the top (for example, 9000). Click the upper left corner of the Command Prompt window, scroll down to "Properties", click the "Layout" tab, and in the section labelled "Screen Buffer Size" enter a new value for "Height". 3) Check to see whether or not the CPU environment variable is set. C:\> echo %CPU% i386 If it's set (you see something other than '%CPU%' printed), go on to step 4. If not, you'll need to set it to an appropriate value for your system. The CPU2000 CD comes with pre-built tools that should work on Intel x86 (IA-32) and Compaq Alpha-based NT systems. If you have an Intel-based system, set CPU to 'i386': C:\> set CPU=i386 If you have an Alpha-based system, set CPU to 'alpha': C:\> set CPU=alpha If you have a system based on a different architecture, you'll have to build the tools yourself. In that case, set the CPU variable to a reasonable value; it'll be used to identify the resultant tools. 4) Check to see whether or not the temp environment variable points to a directory that can be used to hold for temporary files. C:\> echo %temp% %temp% If it's unset (just prints %temp%), you should set it to the full pathname (with drive letter) to a directory that can be used as scratch space. For example, if you want to use the C:\TEMP directory, you'd use the following command: C:\> set temp=C:\TEMP 5) Decide where you want to install the CPU2000 suite. You should make sure that your chosen destination disk has at least 1GB free. (For more information on disk usage, see system_requirements.txt.) For the following examples, we will assume that your destination is on drive F:, in the directory \cpu2000. 6) Change to the CD directory. For the following examples, we'll assume that your CD is mounted on drive E:. 7) You're now ready to run the installer. The format for this command is install.bat For example, if you had decided to install CPU2000 in F:\cpu2000, the command you enter would be E:\> install.bat F: \cpu2000 Note the space between "F:" and "\cpu2000". It's very important. You should see a message similar to the following: The environment variable SPEC should point to the source of the SPEC distribution (as an absolute path). I will now try to set the variable for you... SPEC is set to E:\ If this is NOT what you want, press control-C Press any key to continue . . . If you see a message similar to the above, just press return. If you receive an error message such as "Access is denied", please verify that %temp% is defined (see step 4 above). If all goes well, you'll see several messages indicating that files are being unpacked. Please be patient - although only a few messages are printed, thousands of files are installed. The installation will consume around 275 - 300MB on your destination disk. (It will consume around 400MB if you don't have pre-built tools.) After this step completes, you will find yourself in the destination directory that you selected. 8) Read the comments to the file shrc.bat and make the appropriate edits for your compiler paths. Caution: you may find that the lines are not correctly formatted (the text appears to be all run together) when you edit this file. If so, see the section below: "Using Text Files on NT". 9) Set the environment, using your edited shrc. For example: F:\cpu2000> shrc 10) Test that you can build the first benchmark using the config file supplied for your system. (For an introduction to config files, see "About Config Files" in %SPEC%\docs.nt\runspec.txt or for detailed information, see %SPEC%\docs.nt\config.txt.) In the example below, "^" (often called "hat" or "carat") indicates line continuation: F:\cpu2000> runspec --action=build --tune=base ^ More? --config=intel_nt_visual_studio.cfg gzip The "--tune=base" indicates that we want to use only the simple tuning, if the file contains more than one kind of tuning. +------------------------------------------------------------+ | NOTE: if you see a window pop up about an access violation | | just after the runspec prints: | | | | Identifying output formats...asc...html... | | | | then this indicates that there is a problem with the pdf | | library built for your system. Disable pdf by entering | | the following commands: | | | | cd bin | | rename PSPDF.pm hideme_PSPDF.pm | | | | Enter the above commands ONLY if you see the referenced | | access violation. | +------------------------------------------------------------+ 11) Test that you can run the first benchmark, using the minimal input set - the "test" workload. For example: F:\cpu2000>runspec --size=test --iterations=1 --noreportable ^ More? --config=intel_nt_visual_studio.cfg gzip The "--noreportable" ensures that the tools will allow us to run just a single benchmark instead of the whole suite. 12) Test that you can run the first benchmark using the real input set - the "reference" workload. For example: F:\cpu2000>runspec --config=intel_nt_visual_studio ^ More? --iterations=1 --noreportable gzip 13) Have a look at %SPEC%\docs.nt\runspec.txt to learn how to do a full run of the suite. Using Text Files on NT ---------------------- There are many files in the SPEC CPU2000 kit that contain text. Unfortunately, Unix systems and NT systems have slightly different conventions for storing text files. Sometimes, a text file formatted for NT will appear on Unix as if it has extra Control-M characters. Sometimes, a text file formatted for Unix will appear on NT as if all the lines were joined together. There are at least three ways for NT users to correctly view and edit text files that originated on a Unix system: (a) Use WordPad. You can find WordPad by Start-->Programs-->Accessories-->WordPad (b) Use a Command Prompt and type "Edit". This alternative works only if the file has a short name with 8 characters or fewer, a dot, and then 3 characters or fewer. If you are trying to use Edit with a longer file name, you can discover that there is an "8 dot 3" synonym for it by typing "dir /x". (c) Use the editor "vi". Although vi originated on Unix systems, it is also often found on NT systems. For example, there is a version with a subset of the traditional Unix vi features in the "Microsoft Windows NT Workstation 4.0 Resource Kit" (information available at http://mspress.microsoft.com); a version with the traditional Unix features in the MKS Toolkit (http://www.datafocus.com/products/tk/); and a freeware version with some non-traditional features known as "Vi IMproved" (at http://www.vim.org/). Example Installation -------------------- Here is a complete NT installation, with comments in asterisks. We assume that Steps 1 and 2 are already done (from the list of Installation Steps earlier in this document). ************************************************************ Step 3: Check to see whether the CPU environment variable is set. ************************************************************ C:\>echo %cpu% i386 ************************************************************ Step 4: Check the temp environment variable. ************************************************************ F:\cpu2000>echo %temp% C:\TEMP ************************************************************ Step 5: Create a place for the suite, and check space. ************************************************************ C:\>f: F:\>mkdir cpu2000 F:\>cd cpu2000 F:\cpu2000>dir Volume in drive F has no label. Volume Serial Number is 64B6-4E51 Directory of F:\cpu2000 12/14/99 10:01a . 12/14/99 10:01a .. 2 File(s) 0 bytes 1,125,040,128 bytes free ************************************************************ Note that we have about 1GB of space on the destination drive, as recommended. ************************************************************ ************************************************************ Step 6: change to the drive where the CD is mounted ************************************************************ F:\cpu2000>e: ************************************************************ Step 7: Actually do the installation. Note the presence of a space in between "f:" and "\cpu2000". ************************************************************ E:\>install.bat f: \cpu2000 The environment variable SPEC should point to the source of the SPEC distribution (as an absolute path). I will now try to set the variable for you... SPEC is set to E:\ If this is NOT what you want, press control-C Press any key to continue . . . Installing from E:\ Unpacking benchmark files Unpacking tools binaries Setting SPEC environment variable to f:\cpu2000 F:\cpu2000> ************************************************************ Step 8: Edit shrc.bat. The "fc" command is used below to compare the original shrc.bat to our modified copy: ************************************************************ F:\cpu2000>copy shrc.bat shrc.as-distributed 1 file(s) copied. F:\cpu2000>notepad shrc.bat F:\cpu2000>fc shrc.as-distributed shrc.bat Comparing files shrc.as-distributed and SHRC.BAT ***** shrc.as-distributed rem following line after you've set the path for your compilers below. rem set SHRC_COMPILER_PATH_SET=yes rem XXXXXXXX END EDIT HERE XXXXXXXXXXX ***** SHRC.BAT rem following line after you've set the path for your compilers below. set SHRC_COMPILER_PATH_SET=yes rem XXXXXXXX END EDIT HERE XXXXXXXXXXX ***** ***** shrc.as-distributed rem call "c:\program files\microsoft visual studio\vc98\bin\vcvars32.bat" rem call "c:\program files\microsoft visual studio\df98\bin\dfvars.bat" ***** SHRC.BAT call "c:\program files\microsoft visual studio\vc98\bin\vcvars32.bat" call "c:\program files\microsoft visual studio\df98\bin\dfvars.bat" ***** ************************************************************ Step 9: set the environment ************************************************************ F:\cpu2000> F:\cpu2000>shrc Setting environment for using Microsoft Visual C++ tools. Setting environment for using Visual Fortran tools PATH=^ F:\cpu2000\bin;^ C:\Program Files\Microsoft Visual Studio\Common\Msdev98\BIN;^ C:\Program Files\Microsoft Visual Studio\DF98\BIN;^ C:\Program Files\Microsoft Visual Studio\VC98\BIN;^ C:\Program Files\Microsoft Visual Studio\Common\Tools;^ C:\Program Files\Microsoft Visual Studio\Common\Tools\WINNT;^ C:\PROGRA~1\MI017E~1\Common\msdev98\BIN;^ C:\PROGRA~1\MI017E~1\VC98\BIN;^ C:\PROGRA~1\MI017E~1\Common\TOOLS\WINNT;^ C:\PROGRA~1\MI017E~1\Common\TOOLS;^ C:\winnt\system32;^ C:\winnt ************************************************************ Step 10. Use runspec to do a test build: ************************************************************ F:\cpu2000>runspec --action=build --tune=base ^ More? --config=intel_nt_visual_studio.cfg gzip runspec v2.00 - Copyright (C) 1999 Standard Performance Evaluation Corporation Loading standard modules.............. Loading runspec modules............. Identifying output formats...asc...html...pdf...ps...raw... We will use: 164.gzip Compiling Binaries Building 164.gzip ref base oct14a default Build Complete ************************************************************ At this point, we've accomplished a lot. The SPEC tree is installed, and we have verified that a benchmark can be compiled using the installed C compiler. ************************************************************ ************************************************************ Step 11. Now try running the first benchmark, using the minimal test workload. The test workload runs in a tiny amount of time and does a minimal verification that the benchmark executable can at least start up: ************************************************************ F:\cpu2000>runspec --size=test --iterations=1 --noreportable ^ More? --config=intel_nt_visual_studio.cfg gzip runspec v2.00 - Copyright (C) 1999 Standard Performance Evaluation Corporation Loading standard modules.............. Loading runspec modules............. Identifying output formats...asc...html...pdf...ps...raw... We will use: 164.gzip Compiling Binaries Up to date 164.gzip test base oct14a default Setting Up Run Directories Setting up 164.gzip test base oct14a default: created Running Benchmarks Running 164.gzip test base oct14a default Success: 1x164.gzip Producing Reports mach: default ext: oct14a size: test set: int format: raw -> F:/cpu2000/result/CINT2000.002.raw format: ASCII -> F:/cpu2000/result/CINT2000.002.asc set: fp runspec finished ************************************************************ Notice 12 lines up the notation "Success: 1x164.gzip". That is what we want to see. ************************************************************ ************************************************************ Step 12. So, let's try running gzip with the real workload. This is going to take a while - on the 200 MHz Pentium Pro used for the sample installation, about 1/2 hour. ************************************************************ F:\cpu2000>runspec --config=intel_nt_visual_studio ^ More? --iterations=1 gzip runspec v2.00 - Copyright (C) 1999 Standard Performance Evaluation Corporation Loading standard modules.............. Loading runspec modules............. Identifying output formats...asc...html...pdf...ps...raw... We will use: 164.gzip Compiling Binaries Up to date 164.gzip ref base oct14a default Setting Up Run Directories Setting up 164.gzip ref base oct14a default: created Running Benchmarks Running 164.gzip ref base oct14a default Success: 1x164.gzip Producing Reports mach: default ext: oct14a size: ref set: int format: raw -> F:/cpu2000/result/CINT2000.003.raw format: ASCII -> F:/cpu2000/result/CINT2000.003.asc set: fp runspec finished ************************************************************ Success with the real workload! So now let's look in the result directory and see what we find: ************************************************************ F:\cpu2000> cd result F:\cpu2000\result>dir Volume in drive F has no label. Volume Serial Number is 64B6-4E51 Directory of F:\cpu2000\result 12/01/99 11:13a . 12/01/99 11:13a .. 12/01/99 10:40a 6,960 CINT2000.002.asc 12/01/99 10:40a 4,707 CINT2000.002.raw 12/01/99 11:13a 6,800 CINT2000.003.asc 12/01/99 11:13a 4,629 CINT2000.003.raw 12/01/99 10:23a images 12/01/99 10:40a 21,825 log.001 12/01/99 10:40a 1,842 log.002 12/01/99 11:13a 2,513 log.003 12/01/99 10:42a 0 log.lock 11 File(s) 49,276 bytes 668,266,496 bytes free ************************************************************ Notice the three log files from our three runspec commands. Those runspec commands are easily extracted with "findstr": ************************************************************ F:\cpu2000\result>findstr \runspec log* log.001:F:\cpu2000\bin\runspec -a build -c intel_nt_visual_studio.cfg gzip log.002:F:\cpu2000\bin\runspec -i test -n 1 -c intel_nt_visual_studio.cfg gzip log.003:F:\cpu2000\bin\runspec -c intel_nt_visual_studio -n 1 gzip ************************************************************ Let's look at our results, in the ".asc" file: ************************************************************ F:\cpu2000\result>type *3.asc CINT2000.003.asc ############################################################################## # INVALID RUN INVALID RUN INVALID RUN INVALID RUN INVALID RUN INVALID RUN # # # # 'reportable' flag not set during run # # 254.gap base did not have enough runs! # # 256.bzip2 base did not have enough runs! # # 255.vortex base did not have enough runs! # # 175.vpr base did not have enough runs! # # 164.gzip base did not have enough runs! # # 253.perlbmk base did not have enough runs! # # 186.crafty base did not have enough runs! # # 176.gcc base did not have enough runs! # # 252.eon base did not have enough runs! # # 197.parser base did not have enough runs! # # 300.twolf base did not have enough runs! # # 181.mcf base did not have enough runs! # # # # INVALID RUN INVALID RUN INVALID RUN INVALID RUN INVALID RUN INVALID RUN # ############################################################################## SPEC CINT2000 Summary -- -- Wed Dec 1 10:42:02 1999 SPEC License #0 Test date: -- Hardware availability: -- Tester: -- Software availability: -- Estimated Estimated Base Base Base Peak Peak Peak Benchmarks Ref Time Run Time Ratio Ref Time Run Time Ratio ------------ -------- -------- -------- -------- -------- -------- 164.gzip 1400 1843 75.9* 175.vpr X 176.gcc X 181.mcf X 186.crafty X 197.parser X 252.eon X 253.perlbmk X 254.gap X 255.vortex X 256.bzip2 X 300.twolf X ======================================================================== 164.gzip 1400 1843 75.9* 175.vpr X 176.gcc X 181.mcf X 186.crafty X 197.parser X 252.eon X 253.perlbmk X 254.gap X 255.vortex X 256.bzip2 X 300.twolf X Est. SPECint_base2000 -- Est. SPECint2000 -- ************************************************************ In the table above, most of the results are blank, because we only ran 1 of the 12 integer benchmarks. Notice that the values for SPECint_base2000 and SPECint2000 are dashes ("--"); these would be filled in if we did a "reportable" run; for information, please see "--reportable" in %SPEC%\docs.nt\runspec.txt There are also lots of dashes for the various portions of the system description, both at the top of the page and in the section that follows. These dashes indicate that we have not filled in the fields that describe the hardware and software that we are testing. For information about these fields, please see: %SPEC%\docs.nt\config.txt ************************************************************ HARDWARE -------- Hardware Vendor: -- Model Name: -- CPU: -- CPU MHz: -- FPU: -- CPU(s) enabled: -- CPU(s) orderable: -- Parallel: -- Primary Cache: -- Secondary Cache: -- L3 Cache: -- Other Cache: -- Memory: -- Disk Subsystem: -- Other Hardware: -- SOFTWARE -------- Operating System: -- Compiler: -- File System: -- System State: -- NOTES ----- -- ############################################################################## # INVALID RUN INVALID RUN INVALID RUN INVALID RUN INVALID RUN INVALID RUN # # # # 'reportable' flag not set during run # # 254.gap base did not have enough runs! # # 256.bzip2 base did not have enough runs! # # 255.vortex base did not have enough runs! # # 175.vpr base did not have enough runs! # # 164.gzip base did not have enough runs! # # 253.perlbmk base did not have enough runs! # # 186.crafty base did not have enough runs! # # 176.gcc base did not have enough runs! # # 252.eon base did not have enough runs! # # 197.parser base did not have enough runs! # # 300.twolf base did not have enough runs! # # 181.mcf base did not have enough runs! # # # # INVALID RUN INVALID RUN INVALID RUN INVALID RUN INVALID RUN INVALID RUN # ############################################################################## ----------------------------------------------------------------------------- For questions about this result, please contact the tester. For other inquiries, please contact webmaster@spec.org. Copyright 1999 Standard Performance Evaluation Corporation Generated on Wed Dec 1 11:13:25 1999 by SPEC CPU2000 ASCII formatter v2.1 ************************************************************ Done. The suite is installed, and we can run at least one benchmark for real. ************************************************************ ----------------------------------------------------------------------------- Copyright (C) 1999-2000 Standard Performance Evaluation Corporation All Rights Reserved