SPECpower_ssj2008 Copyright (C) 2007-2023 Standard Performance Evaluation Corporation Dell Inc. PowerEdge R7615 (AMD EPYC 9654P, 2.40 GHz) SPECpower_ssj2008 = 24,677 overall ssj_ops/watt Test Sponsor: Dell Inc. SPEC License #: 6573 Tested By: Dell Inc. Test Location: Round Rock, TX, USA Test Date: Aug 26, 2023 Publication: Sep 18, 2023 Hardware Availability: Feb-2023 Software Availability: Jan-2023 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.4% | 11,229,635 | 347 | 32,382 90% | 90.1% | 10,178,832 | 327 | 31,108 80% | 80.0% | 9,038,784 | 301 | 30,039 70% | 70.0% | 7,911,815 | 269 | 29,364 60% | 60.0% | 6,778,233 | 249 | 27,173 50% | 50.0% | 5,646,900 | 231 | 24,497 40% | 40.0% | 4,521,566 | 211 | 21,470 30% | 29.9% | 3,383,074 | 190 | 17,827 20% | 20.0% | 2,258,199 | 168 | 13,439 10% | 10.0% | 1,127,693 | 145 | 7,758 Active Idle | 0 | 77.4 | 0 sum of ssj_ops / sum of power = | 24,677 System Under Test Set: 'sut' Set Identifier: sut Set Description: System Under Test # of Identical Nodes: 1 Comment: PowerEdge R7615 HARDWARE Hardware Vendor: Dell Inc. Model: PowerEdge R7615 (AMD EPYC 9654P, 2.40 GHz) Form Factor: 2U CPU Name: AMD EPYC 9654P 2.40 GHz CPU Characteristics: 96core, 2.40 GHz, 384 MB L3 Cache, Max Boost Clock up to 3.55 GHz CPU Frequency (MHz): 2400 CPU(s) Enabled: 96 cores, 1 chip, 96 cores/chip Hardware Threads: 192 (2 / core) CPU(s) Orderable: 1 chip Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 1 MB I+D on chip per core Tertiary Cache: 384 MB I+D on chip per chip, 32 MB shared / 8 cores Other Cache: None Memory Amount (GB): 192 # and size of DIMM: 12 x 16 GB Memory Details: 16GB 1Rx8 PC4-4800-R running at 3600. Slots A1-12 populated. Power Supply Quantity and Rating 1 x 1100 (W): Power Supply Details: 1100W Titanium Efficiency (DPN FR0KX) Disk Drive: 1 x 960GB NVMe SSD DPN [400-BMTJ] Disk Controller: n/a # and type of Network Interface 1 x Dual-port Broadcom 5720 Cards (NICs) Installed: NICs Enabled in Firmware / OS / 2/2/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Balanced power plan in OS (see SUT notes) Operating System (OS): Microsoft Windows Server 2022 Datacenter OS Version: 21H2 Build 20348.1487 Filesystem: NTFS JVM Vendor: Oracle JVM Version: Open JDK 64-Bit Server VM Microsoft-30338(build 17.0.2+8-LTS, mixed mode, sharing) JVM Command-line Options: -server -Xms1500m -Xmx1500m -Xmn1300m -XX:+UseParallelGC -XX:ParallelGCThreads=2 -XX:+UseLargePages -XX:LargePageSizeInBytes=2m -XX:+UseBiasedLocking -XX:InlineSmallCode=1500 -XX:UseAVX=1 -XX:AutoBoxCacheMax=20000 -XX:+OptimizeFill -XX:+AggressiveHeap JVM Affinity: start /NODE[0-11] /AFFINITY [0xF - 0xF000] JVM Instances: 48 JVM Initial Heap (MB): 1500 JVM Maximum Heap (MB): 1500 JVM Address Bits: 64 Boot Firmware Version: 1.4.5 Management Firmware Version: 6.10.30.00 A00 Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: n/a Boot Firmware Settings * Logical Processor enabled * L1 Stream HW Prefetcher disabled * L2 Stream HW Prefetcher disabled * MADT Core Enumeration set to Linear * L3 Cache as NUMA Domain set to Enabled * NUMA nodes per socket set to 4 * System Profile set to Custom * CPU Power Management set Max * Memory Frequency set to 3600 MHz * Memory Patrol Scrub disabled * Memory Refresh Rate set to 1x * Determinism Slider set to Power Determinism * Efficiency Optimized Mode Enabled * ApbDis enabled * ApbDis Fixed Socket P-state set to P3 * xGMI x20 Management Firmware Settings Minimum Power (Performance per Watt Optimized) System Under Test Notes * Each JVM instance was bound to 4 logical processors * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark * Run initiated via Windows Remote Desktop Connection * Hard Disk set to turn off after 1 minute * Display set to turn off after 1 minute * SPECpower_ssj.props input.load_level.number_warehouses set to 192 due to a known inconsistency in processor reporting with this Java version * Power Plan Minimum processor state set to 0% * Power Plan Maximum processor state set to 100% * Using Windows PowerShell, set the following powercfg properties: * Powercfg /setacvalueindex scheme_current sub_processor PROCTHROTTLEMIN 0 * Powercfg /setacvalueindex scheme_current sub_processor PROCTHROTTLEMAX 100 * Powercfg /setacvalueindex scheme_current sub_processor PERFEPP 0 * Powercfg /setacvalueindex scheme_current sub_processor perfautonomous 1 * Powercfg /setactive scheme_current * N/A: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. * Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. * Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. * The system ROM used for this result contains AMD AGESA version GenoaPI-SP5 1.0.0.7 for the AMD EPYC 9654P processor. Controller System HARDWARE Hardware Vendor: Dell Inc Model: PowerEdge R410 CPU Description: Intel Xeon E5620, 2.40 GHz Memory amount (GB): 32.0 SOFTWARE Operating System (OS): Microsoft Windows Server 2008 R2 Enterprise Edition Service Pack 1 JVM Vendor: Oracle Corporation JVM Version: Hotspot(TM) Client VM, version 1.8.0_121 CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Yokogawa Meters and Instruments Corporation Model: WT210 Serial Number: 91J936840 Connectivity: RS-232 Input Connection: Default Metrology Institute: NIST Accredited by: TesCom Calibration Label: T76419 Date of Calibration: 25-Oct-2022 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.10.0-82175bac-20220817 Setup Description: Connected to power supply TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: 5.10.26.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 25 mm in front of SUT main airflow intake Notes None Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 347 | 21.4 90% | 327 | 21.4 80% | 301 | 21.4 70% | 269 | 21.3 60% | 249 | 21.3 50% | 231 | 21.2 40% | 211 | 21.2 30% | 190 | 21.2 20% | 168 | 21.2 10% | 145 | 21.1 Active Idle | 77.4 | 21.1 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 208V / 60 Hz / 1 phase / | 21.1 | 255 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20230829-01308-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 11,455,545 Calibration 2 | | | 11,310,615 Calibration 3 | | | 11,291,913 ssj_ops@calibrated=11,301,264 100% | 99.4% | 11,301,264 | 11,229,635 90% | 90.1% | 10,171,137 | 10,178,832 80% | 80.0% | 9,041,011 | 9,038,784 70% | 70.0% | 7,910,885 | 7,911,815 60% | 60.0% | 6,780,758 | 6,778,233 50% | 50.0% | 5,650,632 | 5,646,900 40% | 40.0% | 4,520,505 | 4,521,566 30% | 29.9% | 3,390,379 | 3,383,074 20% | 20.0% | 2,260,253 | 2,258,199 10% | 10.0% | 1,130,126 | 1,127,693 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20230829-01308.WIN-5QPKQ797D4A.txt) for additional details. Copyright (C) 2007-2023 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]