Hewlett Packard Enterprise ProLiant ML30 Gen10 Plus | SPECpower_ssj2008 = 10,299 overall ssj_ops/watt | ||||
Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Feb 10, 2022 |
Hardware Availability: | Mar-2022 | Software Availability: | Oct-2020 | Publication: | Mar 24, 2022 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 100.0% | 861,661 | 78.0 | 11,042 |
90% | 89.8% | 774,015 | 62.3 | 12,427 |
80% | 79.7% | 687,059 | 53.0 | 12,966 |
70% | 70.1% | 604,247 | 47.2 | 12,799 |
60% | 59.9% | 516,494 | 42.3 | 12,220 |
50% | 49.9% | 430,136 | 38.1 | 11,288 |
40% | 40.2% | 346,576 | 34.2 | 10,123 |
30% | 30.0% | 258,443 | 31.3 | 8,263 |
20% | 20.0% | 172,735 | 28.7 | 6,027 |
10% | 10.0% | 86,137 | 25.5 | 3,381 |
Active Idle | 0 | 19.4 | 0 | |
∑ssj_ops / ∑power = | 10,299 |
Set Identifier: | SUT |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | SUT |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant ML30 Gen10 Plus |
Form Factor: | Tower |
CPU Name: | Intel(R) Xeon(R) E-2388G CPU 3.20GHz |
CPU Characteristics: | 8-Core, 3.20 GHz, 16MB L3 Cache |
CPU Frequency (MHz): | 3200 |
CPU(s) Enabled: | 8 cores, 1 chip, 8 cores/chip |
Hardware Threads: | 16 (2 / core) |
CPU(s) Orderable: | 1 chip |
Primary Cache: | 32 KB I + 48 KB D on chip per core |
Secondary Cache: | 512 KB I+D on chip per core |
Tertiary Cache: | 16 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 16 |
# and size of DIMM: | 2 x 8192 MB |
Memory Details: | 8GB 1Rx8 PC4-3200AA-ED2-11; slots 1, 3 populated |
Power Supply Quantity and Rating (W): | 1 x 350 |
Power Supply Details: | HPE 350W ATX Power Supply Kit (P21652-B21) |
Disk Drive: | 1 x HPE 240GB M.2 SATA M.2 2280 5300B SSD (P19888-B21) |
Disk Controller: | Embedded SATA Controller |
# and type of Network Interface Cards (NICs) Installed: | 1 x HPE Ethernet 1Gb 2-port BASE-T BCM5720 Adapter (onboard) |
NICs Enabled in Firmware / OS / Connected: | 2/2/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Enabled (see SUT Notes) |
Operating System (OS): | SUSE Linux Enterprise Server 12 SP5 |
OS Version: | 4.12.14-120-default |
Filesystem: | xfs |
JVM Vendor: | Oracle Corporation |
JVM Version: | Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.9+7-LTS, mixed mode) |
JVM Command-line Options: | -server -Xmn11500m -Xms13000m -Xmx13000m -XX:+UseLargePages -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchInstr=0 -XX:AllocatePrefetchLines=4 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:ParallelGCThreads=8 -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:+UseParallelOldGC -XX:FreqInlineSize=2500 -XX:MinJumpTableSize=18 -XX:UseAVX=0 -XX:+UseBiasedLocking -XX:-ThreadLocalHandshakes -XX:+UseHugeTLBFS -XX:+UseTransparentHugePages |
JVM Affinity: | numactl --cpunodebind=0 --localalloc |
JVM Instances: | 1 |
JVM Initial Heap (MB): | 13000 |
JVM Maximum Heap (MB): | 13000 |
JVM Address Bits: | 64 |
Boot Firmware Version: | U61 v1.54 (01/13/2022) |
Management Firmware Version: | 2.55 Oct 01 2021 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | None |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL360 Gen9 |
CPU Description: | 2x Intel Xeon E5-2660 v3 |
Memory amount (GB): | 64 |
Software | |
---|---|
Operating System (OS): | Windows Server 2012 R2 |
JVM Vendor: | Oracle Corporation |
JVM Version: | 1.8.0_201-b09 (build 25.201-b09, mixed mode) |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa |
Model: | WT310 |
Serial Number: | C2QM22002V |
Connectivity: | GPIB vi NI GPIB-USB-HS |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | TRANSCAT |
Calibration Label: | 5-F91A5-140-1 |
Date of Calibration: | 26-Jun-2021 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.9.2-3976349f-20201208 |
Setup Description: | SUT Power Supply 1 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 78.0 | 22.1 |
90% | 62.3 | 22.2 |
80% | 53.0 | 22.2 |
70% | 47.2 | 22.2 |
60% | 42.3 | 22.2 |
50% | 38.1 | 22.1 |
40% | 34.2 | 22.1 |
30% | 31.3 | 22.0 |
20% | 28.7 | 22.0 |
10% | 25.5 | 21.9 |
Active Idle | 19.4 | 21.9 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
208V / 60 Hz / 1 phase / 2 wires | 21.9 | 132 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 680,854 | ||
Calibration 2 | 862,159 | ||
Calibration 3 | 861,484 | ||
ssj_ops@calibrated=861,822 | |||
100% | 100.0% | 861,822 | 861,661 |
90% | 89.8% | 775,639 | 774,015 |
80% | 79.7% | 689,457 | 687,059 |
70% | 70.1% | 603,275 | 604,247 |
60% | 59.9% | 517,093 | 516,494 |
50% | 49.9% | 430,911 | 430,136 |
40% | 40.2% | 344,729 | 346,576 |
30% | 30.0% | 258,546 | 258,443 |
20% | 20.0% | 172,364 | 172,735 |
10% | 10.0% | 86,182 | 86,137 |
Active Idle | 0 | 0 |