Hewlett Packard Enterprise ProLiant DL110 Gen10 Plus | SPECpower_ssj2008 = 9,581 overall ssj_ops/watt | ||||
Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Jul 12, 2021 |
Hardware Availability: | Aug-2021 | Software Availability: | Jun-2021 | Publication: | Aug 31, 2021 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.7% | 3,318,199 | 299 | 11,087 |
90% | 90.1% | 2,996,610 | 277 | 10,822 |
80% | 80.1% | 2,663,920 | 230 | 11,583 |
70% | 69.8% | 2,323,252 | 193 | 12,016 |
60% | 59.8% | 1,991,168 | 171 | 11,658 |
50% | 50.0% | 1,662,976 | 154 | 10,771 |
40% | 40.0% | 1,330,630 | 141 | 9,432 |
30% | 30.0% | 997,346 | 129 | 7,716 |
20% | 20.1% | 668,831 | 116 | 5,772 |
10% | 10.0% | 331,877 | 103 | 3,207 |
Active Idle | 0 | 94.1 | 0 | |
∑ssj_ops / ∑power = | 9,581 |
Set Identifier: | SUT |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | SUT |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL110 Gen10 Plus |
Form Factor: | 1U |
CPU Name: | Intel Xeon Gold 6314U CPU @ 2.30GHz (Intel Turbo Boost Technology up to 3.4GHz) |
CPU Characteristics: | 32-Core, 2.30 GHz, 48MB L3 Cache |
CPU Frequency (MHz): | 2300 |
CPU(s) Enabled: | 32 cores, 1 chip, 32 cores/chip |
Hardware Threads: | 64 (2 / core) |
CPU(s) Orderable: | 1 chip |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 1280 MB I+D on chip per core |
Tertiary Cache: | 48 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 64 |
# and size of DIMM: | 8 x 8192 MB |
Memory Details: | 8 x 8GB 1Rx8 PC4-3200-AA-RD1-12; slots 1,2,3,4,5,6,7,8 populated in each socket |
Power Supply Quantity and Rating (W): | 1 x 700 |
Power Supply Details: | HPE 700W Flex Slot Platinum Hot Plug Low Halogen AC Power Supply Kit (P44975-B21) |
Disk Drive: | 1 x HPE 240GB SATA 6G M.2 5300 SSD (P19888-B21) |
Disk Controller: | None |
# and type of Network Interface Cards (NICs) Installed: | 1 x Ethernet 10/25Gb 2-port SFP28 MCX562A-ACAI OCP3 Adapter |
NICs Enabled in Firmware / OS / Connected: | 2/1/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Enabled (see SUT Notes) |
Operating System (OS): | Windows Server 2019 Datacenter |
OS Version: | Version 1809 (Build 17763.1132) |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.8+10-LTS, mixed mode) |
JVM Command-line Options: | -server -Xmn1475m -Xms1675m -Xmx1675m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:ParallelGCThreads=2 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:UseAVX=0 -XX:-UseAdaptiveSizePolicy -XX:-ThreadLocalHandshakes |
JVM Affinity: | start /NODE [0,1] /AFFINITY[3,C,30,C0,300,C00,3000,C000,30000,C0000,300000,C00000,3000000,C000000,30000000,C00000000] |
JVM Instances: | 32 |
JVM Initial Heap (MB): | 1675 |
JVM Maximum Heap (MB): | 1675 |
JVM Address Bits: | 64 |
Boot Firmware Version: | U56 v1.40 (04/28/2021) |
Management Firmware Version: | 1.40 Apr 28 2021 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | HPE Service Pack for ProLiant (SPP) Version:2021.06.21, KB4554354 |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL360 G9 |
CPU Description: | 2x Intel Xeon E5-2660 v3 |
Memory amount (GB): | 128 |
Software | |
---|---|
Operating System (OS): | Windows Server 2012 R2 - V6.3 9600 |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.8+10-LTS, mixed mode) |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa |
Model: | WT210 |
Serial Number: | 91K218965 |
Connectivity: | GPIB vi NI GPIB-USB-HS |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | TRANSCAT |
Calibration Label: | 5-FU771-60-1 |
Date of Calibration: | 23-Aug-2020 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.9.2-3976349f-20201208 |
Setup Description: | Connected to SUT Power Supply 1 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 299 | 20.5 |
90% | 277 | 20.4 |
80% | 230 | 20.5 |
70% | 193 | 20.6 |
60% | 171 | 20.6 |
50% | 154 | 20.8 |
40% | 141 | 20.7 |
30% | 129 | 20.6 |
20% | 116 | 20.6 |
10% | 103 | 20.6 |
Active Idle | 94.1 | 20.5 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
210V / 60 Hz / 1 phase / 2 wires | 20.4 | 132 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 3,327,877 | ||
Calibration 2 | 3,325,697 | ||
Calibration 3 | 3,329,343 | ||
ssj_ops@calibrated=3,327,520 | |||
100% | 99.7% | 3,327,520 | 3,318,199 |
90% | 90.1% | 2,994,768 | 2,996,610 |
80% | 80.1% | 2,662,016 | 2,663,920 |
70% | 69.8% | 2,329,264 | 2,323,252 |
60% | 59.8% | 1,996,512 | 1,991,168 |
50% | 50.0% | 1,663,760 | 1,662,976 |
40% | 40.0% | 1,331,008 | 1,330,630 |
30% | 30.0% | 998,256 | 997,346 |
20% | 20.1% | 665,504 | 668,831 |
10% | 10.0% | 332,752 | 331,877 |
Active Idle | 0 | 0 |