Hewlett Packard Enterprise ProLiant DL345 Gen10 Plus | SPECpower_ssj2008 = 18,260 overall ssj_ops/watt | ||||
Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Feb 18, 2021 |
Hardware Availability: | Mar-2021 | Software Availability: | Jul-2020 | Publication: | Mar 15, 2021 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.5% | 6,319,281 | 272 | 23,199 |
90% | 89.9% | 5,708,906 | 255 | 22,418 |
80% | 80.0% | 5,079,633 | 236 | 21,533 |
70% | 70.0% | 4,444,845 | 217 | 20,503 |
60% | 60.0% | 3,813,590 | 197 | 19,346 |
50% | 50.0% | 3,175,516 | 169 | 18,802 |
40% | 40.0% | 2,542,845 | 150 | 16,990 |
30% | 30.0% | 1,904,118 | 134 | 14,167 |
20% | 20.0% | 1,271,795 | 120 | 10,620 |
10% | 10.0% | 634,704 | 104 | 6,132 |
Active Idle | 0 | 58.0 | 0 | |
∑ssj_ops / ∑power = | 18,260 |
Set Identifier: | SUT |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | SUT |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL345 Gen10 Plus |
Form Factor: | 2U |
CPU Name: | AMD EPYC 7763 2.45 GHz |
CPU Characteristics: | 64-Core, 2.45 GHz, 256MB L3 Cache |
CPU Frequency (MHz): | 2450 |
CPU(s) Enabled: | 64 cores, 1 chip, 64 cores/chip |
Hardware Threads: | 128 (2 / core) |
CPU(s) Orderable: | 1 chip |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 512 KB I+D on chip per core |
Tertiary Cache: | 256 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 128 |
# and size of DIMM: | 8 x 16384 MB |
Memory Details: | 16 GB 2Rx8 PC4-3200AA-R; slots 1, 3, 5, 7, 10, 12, 14 and 16 populated |
Power Supply Quantity and Rating (W): | 1 x 800 |
Power Supply Details: | HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit (865438-B21) |
Disk Drive: | 1 x HPE 480GB SATA 6G SSD (P05976-B21) |
Disk Controller: | Embedded SATA Controller |
# and type of Network Interface Cards (NICs) Installed: | 1 x Intel Ethernet I350 4-Port 1Gb NIC |
NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Enabled (see SUT Notes) |
Operating System (OS): | SUSE Linux Enterprise Server 12 SP5 |
OS Version: | 4.12.14-122.17-default |
Filesystem: | xfs |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.8+10-LTS, mixed mode), version 11.0.8 |
JVM Command-line Options: | -server -Xmn1450m -Xms1700m -Xmx1700m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:ParallelGCThreads=2 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=2 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:LargePageSizeInBytes=2m -XX:+UseBiasedLocking -XX:+UseHugeTLBFS -XX:+UseTransparentHugePages |
JVM Affinity: | for each physicalCore { numactl -C physicalCoreId, physicalCoreId + 64 } |
JVM Instances: | 64 |
JVM Initial Heap (MB): | 1700 |
JVM Maximum Heap (MB): | 1700 |
JVM Address Bits: | 64 |
Boot Firmware Version: | A43 v2.40 (02/15/2021) |
Management Firmware Version: | 2.40 Feb 07 2021 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | None |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL360 Gen9 |
CPU Description: | 2 X E5-2660 v3 |
Memory amount (GB): | 128 |
Software | |
---|---|
Operating System (OS): | Micorsoft Windows Server 2012 R2 Standard (Version 6.3.9600, Build 9600) |
JVM Vendor: | Oracle Corporation |
JVM Version: | 1.8.0_91-b15 (build 25.91-b15, mixed mode) |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa |
Model: | WT210 |
Serial Number: | 91GB45371 |
Connectivity: | GPIB vi NI GPIB-USB-HS |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | TRANSCAT |
Calibration Label: | 5-FU771-20-1 |
Date of Calibration: | 21-Aug-2020 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.9.2-3976349f-20201208 |
Setup Description: | SUT Power Supply |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 272 | 23.6 |
90% | 255 | 23.6 |
80% | 236 | 23.7 |
70% | 217 | 23.7 |
60% | 197 | 23.6 |
50% | 169 | 23.6 |
40% | 150 | 23.6 |
30% | 134 | 23.7 |
20% | 120 | 23.7 |
10% | 104 | 23.7 |
Active Idle | 58.0 | 23.6 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
208V / 60 Hz / 1 phase / 2 wires | 23.6 | 132 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 6,356,172 | ||
Calibration 2 | 6,353,283 | ||
Calibration 3 | 6,353,072 | ||
ssj_ops@calibrated=6,353,177 | |||
100% | 99.5% | 6,353,177 | 6,319,281 |
90% | 89.9% | 5,717,859 | 5,708,906 |
80% | 80.0% | 5,082,542 | 5,079,633 |
70% | 70.0% | 4,447,224 | 4,444,845 |
60% | 60.0% | 3,811,906 | 3,813,590 |
50% | 50.0% | 3,176,589 | 3,175,516 |
40% | 40.0% | 2,541,271 | 2,542,845 |
30% | 30.0% | 1,905,953 | 1,904,118 |
20% | 20.0% | 1,270,635 | 1,271,795 |
10% | 10.0% | 635,318 | 634,704 |
Active Idle | 0 | 0 |