SPECpower_ssj2008 Copyright (C) 2007-2021 Standard Performance Evaluation Corporation Hewlett Packard Enterprise ProLiant DL385 Gen10 Plus SPECpower_ssj2008 = 18,329 overall ssj_ops/watt Test Sponsor: Hewlett Packard Enterprise SPEC License #: 3 Tested By: Hewlett Packard Enterprise Test Location: Houston, TX, USA Test Date: Feb 18, 2021 Publication: Mar 15, 2021 Hardware Availability: Mar-2021 Software Availability: Jul-2020 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.5% | 12,550,024 | 546 | 22,966 90% | 90.1% | 11,361,817 | 510 | 22,256 80% | 79.9% | 10,083,515 | 470 | 21,452 70% | 70.0% | 8,836,028 | 430 | 20,550 60% | 60.0% | 7,565,367 | 391 | 19,355 50% | 50.0% | 6,304,595 | 336 | 18,778 40% | 40.0% | 5,051,587 | 287 | 17,626 30% | 30.0% | 3,782,480 | 260 | 14,565 20% | 20.0% | 2,523,158 | 232 | 10,891 10% | 10.0% | 1,258,197 | 200 | 6,297 Active Idle | 0 | 120 | 0 sum of ssj_ops / sum of power = | 18,329 System Under Test Set: 'SUT' Set Identifier: SUT Set Description: System Under Test # of Identical Nodes: 1 Comment: SUT HARDWARE Hardware Vendor: Hewlett Packard Enterprise Model: ProLiant DL385 Gen10 Plus Form Factor: 2U CPU Name: AMD EPYC 7763 2.45 GHz CPU Characteristics: 64-Core, 2.45GHz 256MB L3 Cache CPU Frequency (MHz): 2450 CPU(s) Enabled: 128 cores, 2 chips, 64 cores/chip Hardware Threads: 256 (2 / core) CPU(s) Orderable: 1,2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 512 KB I+D on chip per core Tertiary Cache: 256 MB I+D on chip per core Other Cache: None Memory Amount (GB): 256 # and size of DIMM: 16 x 16384 MB Memory Details: 8GB 1Rx8 PC4-3200AA-R slots 1, 3, 5, 7, 10, 12, 14 & 16 on each socket Power Supply Quantity and Rating 1 x 800 (W): Power Supply Details: HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit (865438-B21) Disk Drive: 1 x HPE 480GB SATA 6G SSD (P05976-B21) Disk Controller: None # and type of Network Interface 1 x Intel Ethernet I350 4-Port 1Gb NIC Cards (NICs) Installed: NICs Enabled in Firmware / OS / 4/4/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled (see SUT Notes) Operating System (OS): SUSE Linux Enterprise Server 12 SP5 OS Version: 4.12.14-122.17-default Filesystem: xfs JVM Vendor: Oracle Corporation JVM Version: Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.8+10-LTS, mixed mode) JVM Command-line Options: -server -Xmn1450m -Xms1700m -Xmx1700m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:ParallelGCThreads=2 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=2 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:LargePageSizeInBytes=2m -XX:+UseBiasedLocking -XX:+UseHugeTLBFS -XX:+UseTransparentHugePages JVM Affinity: for each physicalCore { numactl -C physicalCoreId, physicalCoreId + 128 } JVM Instances: 128 JVM Initial Heap (MB): 1700 JVM Maximum Heap (MB): 1700 JVM Address Bits: 64 Boot Firmware Version: A42 v2.40 (02/15/2021) Management Firmware Version: 2.40 Feb 07 2021 Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: None Boot Firmware Settings BIOS Platform Configuration (RBSU): * BIOS Serial Console Port: Disabled * USB Support: All USB Ports Disabled * Determinism Control: Manual * Performance Determinism : Power Determinism * Memory Interleaving Mode: Disabled * Maximum Memory Bus Frequency: 2400 MHz * DRAM Controller Power Down: Enabled * NUMA memory domains per socket: Four memory domains per socket * Last-Level Cache (LLC) As NUMA Node: Enabled * Data Fabric C-State Enable: Force Enabled * C-State Efficiency Mode: Enabled * AMD Core Performance Boost: Disabled * AMD Fmax Boost Limit Control: Manual * AMD Fmax Boost Limit: 2450 * L1 Stream HW Prefetcher: Disabled * L2 Stream HW Prefetcher: Disabled * Maximum PCI Express Speed: PCIe Generation 1.0 Management Firmware Settings See SUT Notes System Under Test Notes * Benchmark started via ssh * SPECpower_ssj.props input.load_level.number_warehouses set to 256 due to a known inconsistency in processor reporting with this Java version * OS tunes: * echo -n 98 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold * echo -n 1000000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate * echo 6000 > /proc/sys/kernel/sched_migration_cost_ns * echo 10000000 > /proc/sys/kernel/sched_min_granularity_ns * echo 0 > /proc/sys/kernel/nmi_watchdog * Applied protection against speculative execution * N/A: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. * Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. * Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. Controller System HARDWARE Hardware Vendor: Hewlett Packard Enterprise Model: ProLiant DL360 Gen9 CPU Description: 2x Intel Xeon E5-2660 v3 Memory amount (GB): 128 SOFTWARE Operating System (OS): Windows Server 2012 R2 JVM Vendor: Oracle Corporation JVM Version: 1.8.0_181-b13 (build 25.181-b13, mixed mode) CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Yokogawa Model: WT210 Serial Number: 91GB47168 Connectivity: GPIB vi NI GPIB-USB-HS Input Connection: Default Metrology Institute: NIST Accredited by: TRANSCAT Calibration Label: 5-FP7QP-100-1 Date of Calibration: 22-May-2020 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.9.2-3976349f-20201208 Setup Description: SUT Power Supply TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main intake Notes None Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 546 | 23.4 90% | 510 | 23.4 80% | 470 | 23.4 70% | 430 | 23.4 60% | 391 | 23.4 50% | 336 | 23.5 40% | 287 | 23.5 30% | 260 | 23.6 20% | 232 | 23.6 10% | 200 | 23.6 Active Idle | 120 | 23.6 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 208V / 60 Hz / 1 phase / | 23.4 | 132 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20210221-01063-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 12,621,368 Calibration 2 | | | 12,623,229 Calibration 3 | | | 12,605,892 ssj_ops@calibrated=12,614,560 100% | 99.5% | 12,614,560 | 12,550,024 90% | 90.1% | 11,353,104 | 11,361,817 80% | 79.9% | 10,091,648 | 10,083,515 70% | 70.0% | 8,830,192 | 8,836,028 60% | 60.0% | 7,568,736 | 7,565,367 50% | 50.0% | 6,307,280 | 6,304,595 40% | 40.0% | 5,045,824 | 5,051,587 30% | 30.0% | 3,784,368 | 3,782,480 20% | 20.0% | 2,522,912 | 2,523,158 10% | 10.0% | 1,261,456 | 1,258,197 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20210221-01063.dl385-milan.txt) for additional details. Copyright (C) 2007-2021 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]