SPECpower_ssj2008 Copyright (C) 2007-2020 Standard Performance Evaluation Corporation Fujitsu FUJITSU Server PRIMERGY RX4770 M6 SPECpower_ssj2008 = 11,077 overall ssj_ops/watt Test Sponsor: Fujitsu SPEC License #: 19 Tested By: Fujitsu Test Location: Kawasaki, Kanagawa, Japan Test Date: Oct 7, 2020 Publication: Nov 4, 2020 Hardware Availability: Nov-2020 Software Availability: Jul-2020 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.9% | 9,904,110 | 834 | 11,882 90% | 89.9% | 8,914,839 | 688 | 12,956 80% | 80.0% | 7,933,444 | 603 | 13,158 70% | 70.0% | 6,944,695 | 532 | 13,043 60% | 60.0% | 5,948,299 | 467 | 12,729 50% | 50.0% | 4,956,147 | 413 | 12,004 40% | 40.0% | 3,966,282 | 370 | 10,727 30% | 30.0% | 2,973,866 | 333 | 8,931 20% | 20.0% | 1,980,442 | 296 | 6,697 10% | 10.0% | 990,995 | 257 | 3,854 Active Idle | 0 | 129 | 0 sum of ssj_ops / sum of power = | 11,077 System Under Test Set: 'RX4770M6' Set Identifier: RX4770M6 Set Description: System Under Test # of Identical Nodes: 1 Comment: Single Node HARDWARE Hardware Vendor: Fujitsu Model: FUJITSU Server PRIMERGY RX4770 M6 Form Factor: 3U CPU Name: Intel Xeon Platinum 8380H CPU Characteristics: 28-Core, 2.90GHz, 38.5MB L3 Cache CPU Frequency (MHz): 2900 CPU(s) Enabled: 112 cores, 4 chips, 28 cores/chip Hardware Threads: 224 (2 / core) CPU(s) Orderable: 4 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 1 MB I+D on chip per core Tertiary Cache: 39424 KB I+D on chip per chip Other Cache: None Memory Amount (GB): 384 # and size of DIMM: 24 x 16384 MB Memory Details: 24 x 16 GB 2Rx8 PC4-3200Y-R; slots 1A, 1B, 1C, 1D, 1E, 1F, 1G, 1H, 1J, 1K, 1L, 1M, 1N, 1P, 1Q, 1R, 1S, 1T, 1U, 1V, 1W, 1X, 1Y, 1Z populated Power Supply Quantity and Rating 2 x 900 (W): Power Supply Details: S26113-E629-V50-1 Disk Drive: 1 x SSD M.2 240GB, S26361-F5787-E240 Disk Controller: Integrated SATA Controller # and type of Network Interface 1 x PLAN CP I350-T4 4X 1000BASE-T OCPv3, Cards (NICs) Installed: PYBLA274U NICs Enabled in Firmware / OS / 4/4/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled (see SUT Notes) Operating System (OS): SUSE Linux Enterprise Server 15 SP2 OS Version: 5.3.18-19-default Filesystem: btrfs JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.8+10-LTS, mixed mode), version 11.0.8 JVM Command-line Options: -server -Xmn23000m -Xms25000m -Xmx25000m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:ParallelGCThreads=14 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:AllocatePrefetchInstr=0 -XX:MinJumpTableSize=18 -XX:UseAVX=0 -XX:+UseHugeTLBFS -XX:+UseTransparentHugePages JVM Affinity: chrt -r 1 taskset -c [(0,1,2,3,7,8,9,14,15,16,17,21,22,23,112,113 ,114,115,119,120,121,126,127,128,129,133,134 ),(4,5,6,10,11,12,13,18,19,20,24,25,26,27,11 6,117,118,122,123,124,125,130,131,132,136,13 7,138,139),(28,29,30,31,35,36,37,42,43,44,45 ,49,50,51,140,141,142,143,147,148,149,154,15 5,156,157,161,162,163),(32,33,34,38,39,40,41 ,46,47,48,52,53,54,55,144,145,146,150,151,15 2,153,158,159,160,164,165,166,167),(56,57,58 ,59,63,64,65,70,71,72,73,77,78,79,168,169,17 0,171,175,176,177,182,183,184,185,189,190,19 1),(60,61,62,66,67,68,69,74,75,76,80,81,82,8 3,172,173,174,178,179,180,181,186,187,188,19 2,193,194,195),(84,85,86,87,91,92,93,98,99,1 00,101,105,106,107,196,197,198,199,203,204,2 05,210,211,212,213,217,218,219),(88,89,90,94 ,95,96,97,102,103,104,108,109,110,111,200,20 1,202,206,207,208,209,214,215,216,220,221,22 2,223)] numactl --membind=[0-7] JVM Instances: 8 JVM Initial Heap (MB): 25000 JVM Maximum Heap (MB): 25000 JVM Address Bits: 64 Boot Firmware Version: R1.1.1 Management Firmware Version: 3.00P Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: None Boot Firmware Settings * Set "ASPM Support = L1 only" in BIOS. * Set "Hardware Prefetcher = Disabled" in BIOS. * Set "Adjacent Cache Line Prefetch = Disabled" in BIOS. * Set "DCU Streamer Prefetcher = Disabled" in BIOS. * Set "Intel Virtualization Technology = Disabled" in BIOS. * Set "Turbo Mode = Disabled" in BIOS. * Set "Energy Performance = Energy Efficient" in BIOS. * Set "Override OS Energy Performance = Enabled" in BIOS. * Set "HWPM Support = Disabled" in BIOS. * Set "Package C State limit = No limit" in BIOS. * Set "UPI Link Frequency Select = 9.6GT/s" in BIOS. * Set "Local x2APIC = Disabled" in BIOS. * Set "Uncore Frequency Override = Power balanced" in BIOS. * Set "DDR Performance = Power balanced" in BIOS.(effective memory frequency = 2400 MHz) * Set "SNC(Sub NUMA) = Enabled" in BIOS. * Set "SATA Controller = Disabled" in BIOS. * Set "USB Port Control = Disable all ports" in BIOS. * Set "Serial Port = Disabled" in BIOS. * Set "Network Stack = Disabled" in BIOS. Management Firmware Settings None System Under Test Notes * kernel parameter: pcie_aspm=force pcie_aspm.policy=powersave intel_pstate=disable * Benchmark started via ssh * modprobe cpufreq_conservative * cpupower frequency-set -g conservative * echo 1000000 > /sys/devices/system/cpu/cpufreq/conservative/sampling_rate * echo 94 > /sys/devices/system/cpu/cpufreq/conservative/up_threshold * echo 0 > /sys/devices/system/cpu/cpufreq/conservative/ignore_nice_load * echo 1 > /sys/devices/system/cpu/cpufreq/conservative/sampling_down_factor * echo 1 > /sys/devices/system/cpu/cpufreq/conservative/freq_step * echo 93 > /sys/devices/system/cpu/cpufreq/conservative/down_threshold * echo always > /sys/kernel/mm/transparent_hugepage/enabled * sysctl -w kernel.sched_migration_cost_ns=6000 * sysctl -w kernel.sched_min_granularity_ns=10000000 * sysctl -w kernel.nmi_watchdog=0 * sysctl -w vm.swappiness=50 * sysctl -w vm.laptop_mode=5 * powertop --auto-tune * The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. * The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. * The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. Controller System HARDWARE Hardware Vendor: Fujitsu Model: PRIMERGY RX2530 M2 CPU Description: 2x Intel Xeon E5-2643 v4 Memory amount (GB): 64 SOFTWARE Operating System (OS): Microsoft Windows Server 2012 R2 Standard JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 25.261-b12, mixed mode), version 1.8.0_261 CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Hioki Model: Hioki3336 Serial Number: 170130930 Connectivity: RS-232 Input Connection: Default Metrology Institute: NICT (National Institute of Information and Communications Technology) Accredited by: HIOKI E.E. CORPORATION Calibration Label: H06400086-2002 Date of Calibration: 12-Feb-2020 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.9.1-a2d19f26-20190717 Setup Description: Connected to PSU 1 and PSU 2 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: Watchport Virtual Port 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main air intake Notes * SPECpower_ssj.props input.load_level.number_warehouses set to 224. Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 834 | 28.1 90% | 688 | 27.6 80% | 603 | 27.0 70% | 532 | 26.3 60% | 467 | 25.9 50% | 413 | 25.2 40% | 370 | 24.9 30% | 333 | 24.6 20% | 296 | 24.2 10% | 257 | 24.1 Active Idle | 129 | 23.8 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 200V / 50 Hz / 1 phase / | 23.8 | 11 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20201006-01049-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 9,436,394 Calibration 2 | | | 9,906,474 Calibration 3 | | | 9,922,216 ssj_ops@calibrated=9,914,345 100% | 99.9% | 9,914,345 | 9,904,110 90% | 89.9% | 8,922,911 | 8,914,839 80% | 80.0% | 7,931,476 | 7,933,444 70% | 70.0% | 6,940,042 | 6,944,695 60% | 60.0% | 5,948,607 | 5,948,299 50% | 50.0% | 4,957,173 | 4,956,147 40% | 40.0% | 3,965,738 | 3,966,282 30% | 30.0% | 2,974,304 | 2,973,866 20% | 20.0% | 1,982,869 | 1,980,442 10% | 10.0% | 991,435 | 990,995 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20201006-01049.localhost.txt) for additional details. Copyright (C) 2007-2020 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]