SPECpower_ssj2008 Copyright (C) 2007-2019 Standard Performance Evaluation Corporation Fujitsu FUJITSU Server PRIMERGY RX2520 M5 SPECpower_ssj2008 = 10,765 overall ssj_ops/watt Test Sponsor: Fujitsu SPEC License #: 19 Tested By: Fujitsu Test Location: Kawasaki, Kanagawa, Japan Test Date: Jul 30, 2019 Publication: Sep 19, 2019 Hardware Availability: Jul-2019 Software Availability: Dec-2018 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.9% | 3,872,265 | 318 | 12,191 90% | 90.1% | 3,493,729 | 277 | 12,623 80% | 79.8% | 3,093,414 | 240 | 12,904 70% | 70.0% | 2,712,055 | 212 | 12,797 60% | 60.0% | 2,325,712 | 188 | 12,385 50% | 50.0% | 1,938,275 | 167 | 11,575 40% | 40.1% | 1,553,224 | 151 | 10,259 30% | 30.0% | 1,161,157 | 137 | 8,483 20% | 20.0% | 774,176 | 122 | 6,334 10% | 10.0% | 387,384 | 106 | 3,645 Active Idle | 0 | 61.5 | 0 sum of ssj_ops / sum of power = | 10,765 System Under Test Set: 'RX2520M5' Set Identifier: RX2520M5 Set Description: System Under Test # of Identical Nodes: 1 Comment: Single Node HARDWARE Hardware Vendor: Fujitsu Model: FUJITSU Server PRIMERGY RX2520 M5 Form Factor: 2U CPU Name: Intel Xeon Gold 5220 CPU Characteristics: 18-Core, 2.20GHz, 24.75MB L3 Cache CPU Frequency (MHz): 2200 CPU(s) Enabled: 36 cores, 2 chips, 18 cores/chip Hardware Threads: 72 (2 / core) CPU(s) Orderable: 1,2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 1 MB I+D on chip per core Tertiary Cache: 25344 KB I+D on chip per chip Other Cache: None Memory Amount (GB): 192 # and size of DIMM: 12 x 16384 MB Memory Details: 12 x 16 GB 2Rx8 PC4-2933Y-R; slots 1A, 1B, 1C, 1D, 1E, 1F, 1G, 1H, 1J, 1K, 1L, 1M populated Power Supply Quantity and Rating 1 x 800 (W): Power Supply Details: Fujitsu Technology Solutions S26113-F574-E13 Disk Drive: 1 x SSD M.2 240GB, S26361-F5706-E240 Disk Controller: Integrated SATA Controller # and type of Network Interface 1 x Intel(R) I350 Gigabit Network Connection Cards (NICs) Installed: (onboard) NICs Enabled in Firmware / OS / 1/1/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled (see SUT Notes) Operating System (OS): SUSE Linux Enterprise Server 12 SP4 OS Version: 4.12.14-94.41-default Filesystem: btrfs JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 JVM Command-line Options: -server -Xmn1700m -Xms1950m -Xmx1950m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:ParallelGCThreads=8 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC -XX:+UseHugeTLBFS -XX:+UseTransparentHugePages -XX:UseAVX=0 JVM Affinity: chrt -r 1 taskset -c [(0,36),(1,37),(2,38),(5,41),(6,42),(9,45),( 10,46),(14,50),(15,51),(3,39),(4,40),(7,43), (8,44),(11,47),(12,48),(13,49),(16,52),(17,5 3),(18,54),(19,55),(20,56),(23,59),(24,60),( 27,63),(28,64),(32,68),(33,69),(21,57),(22,5 8),(25,61),(26,62),(29,65),(30,66),(31,67),( 34,70),(35,71)] numactl --membind=[0-3] JVM Instances: 36 JVM Initial Heap (MB): 1950 JVM Maximum Heap (MB): 1950 JVM Address Bits: 64 Boot Firmware Version: R1.11.0 Management Firmware Version: 2.43P Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: None Boot Firmware Settings * Set "SATA Controller = Disabled" in BIOS. * Set "Serial Port = Disabled" in BIOS. * Set "Hardware Prefetcher = Disabled" in BIOS. * Set "Adjacent Cache Line Prefetch = Disabled" in BIOS. * Set "DCU Streamer Prefetcher = Disabled" in BIOS. * Set "Intel Virtualization Technology = Disabled" in BIOS. * Set "Override OS Energy Performance = Enabled" in BIOS. * Set "Energy Performance = Energy Efficient" in BIOS. * Set "DDR Performance = Power balanced" in BIOS.(effective memory frequency = 2400 MHz) * Set "Autonomous C-state Support = Enabled" in BIOS. * Set "ASPM Support = Auto" in BIOS. * Set "UPI Link Frequency Select = 9.6GT/s" in BIOS. * Set "Uncore Frequency Override = Power balanced" in BIOS. * Set "IMC Interleaving = 1-way" in BIOS. * Set "USB Port Control = Enable internal ports only" in BIOS. * Set "Network Stack = Disabled" in BIOS. Management Firmware Settings None System Under Test Notes * Storage drive bays type:12 x 3.5-inch hot-plug SAS/SATA * kernal parameter:pcie_aspm=force pcie_aspm.policy=powersave intel_pstate=disable rcu_nocbs=1-71 nohz_full=1-71 isolcpus=1-71 * Benchmark started via ssh * modprobe cpufreq_conservative * cpupower frequency-set --governor conservative * echo -n 95 > /sys/devices/system/cpu/cpufreq/conservative/up_threshold * echo -n 1 > /sys/devices/system/cpu/cpufreq/conservative/freq_step * echo -n 1000000 > /sys/devices/system/cpu/cpufreq/conservative/sampling_rate * echo -n 0 >/sys/devices/system/cpu/cpufreq/conservative/ignore_nice_load * sysctl -w kernel.sched_migration_cost_ns=6000 * echo -n 94 > /sys/devices/system/cpu/cpufreq/conservative/down_threshold * echo -n 1 > /sys/devices/system/cpu/cpufreq/conservative/sampling_down_factor * sysctl -w kernel.sched_min_granularity_ns=10000000 * echo always > /sys/kernel/mm/transparent_hugepage/enabled * powertop --auto-tune * echo 0 > /proc/sys/kernel/nmi_watchdog * sysctl -w vm.swappiness=50 * sysctl -w vm.laptop_mode=5 * <Yes>: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. * <Yes>: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. * <Yes>: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. Controller System HARDWARE Hardware Vendor: Fujitsu Model: PRIMERGY RX2530 M2 CPU Description: Intel Xeon E5-2643 v4 Memory amount (GB): 64 SOFTWARE Operating System (OS): Microsoft Windows Server 2012 R2 Standard JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Hioki Model: Hioki3336 Serial Number: 170134584 Connectivity: RS-232 Input Connection: Default Metrology Institute: NICT (National Institute of Information and Communications Technology) Accredited by: HIOKI E.E. CORPORATION. Calibration Label: H06400087-1901 Date of Calibration: 30-Jan-2019 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.8.1-260d064e-20161220 Setup Description: Connected to PSU 1 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: Watchport Virtual Port 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main air intake Notes * SPECpower_ssj.props input.load_level.number_warehouses set to 72 due to a known inconsistency in processor reporting with this Java version. Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 318 | 20.2 90% | 277 | 20.4 80% | 240 | 20.4 70% | 212 | 20.6 60% | 188 | 20.7 50% | 167 | 20.8 40% | 151 | 20.8 30% | 137 | 20.8 20% | 122 | 20.8 10% | 106 | 20.9 Active Idle | 61.5 | 20.9 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 200V / 50 Hz / 1 phase / | 20.2 | 11 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20190730-00996-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 3,544,304 Calibration 2 | | | 3,874,567 Calibration 3 | | | 3,877,559 ssj_ops@calibrated=3,876,063 100% | 99.9% | 3,876,063 | 3,872,265 90% | 90.1% | 3,488,456 | 3,493,729 80% | 79.8% | 3,100,850 | 3,093,414 70% | 70.0% | 2,713,244 | 2,712,055 60% | 60.0% | 2,325,638 | 2,325,712 50% | 50.0% | 1,938,031 | 1,938,275 40% | 40.1% | 1,550,425 | 1,553,224 30% | 30.0% | 1,162,819 | 1,161,157 20% | 20.0% | 775,213 | 774,176 10% | 10.0% | 387,606 | 387,384 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20190730-00996.sles12sp4.txt) for additional details. Copyright (C) 2007-2019 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]